Badger Basket Wicker Doll Cradle 00369, 00369 User manual

  • Hello! I am an AI chatbot trained to assist you with the Badger Basket Wicker Doll Cradle 00369 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1.0/0407/TG
PRODUCT MODEL
NUMBER:
00369
Visit us online at www.badgerbasket.com
Toll-Free Customer Service: 1-800-236-1310 (Monday to Thursday 7:30 AM-4:30 PM CST)
Web: http://www.badgerbasket.com/parts • E-mail: parts1@badgerbasket.com
PLANT AND GENERAL OFFICE: PO Box 227, Edgar, WI 54426-0227 • Phone: 715-352-2311 • Fax: 715-352-3163
CORPORATE OFFICE: 111 Lions Dr., Suite 220, Barrington, IL 60010
Page 1 of 3
WICKER DOLL CRADLE
WITH BEDDING
Assembly Instructions. Adult Assembly
Required. Save these instructions for future
use. This item is a toy for dolls only.
For children ages (3) years and older.
1.0/0407/TGPage 2 of 3
PARTS AND HARDWARE:
BEFORE YOU BEGIN ASSEMBLY:
Check all parts and hardware listed. If anything is missing or you have
questions, please DO NOT call the store or return the product to them.
Contact us for assistance. Most problems are resolved without you
needing to leave home. When emailing or calling us, please have this
instruction manual and your product model number ready.
For fastest service, go to http://www.badgerbasket.com/parts
TOOLS NEEDED:
Phillips Screwdriver
A power screwdriver is helpful but
be careful not to damage the product.
PARTS INCLUDED:
(A) 2 - Rockers
(B) 1 - Bar
(C) 2 - Screws
(D) 1 - Cradle Body
(E) 2 - Bolts
(F) 1 - Fabric Liner
(G) 1 - Fabric Sheet
(H) 1 - Mattress Pad
Ax2
Gx1
Fx1
Hx1
Bx1
Dx1
WARNING !! CHOKING
HAZARD! SMALL PARTS!
Not for children under
three (3) years of age.
Please make sure children
know that this furniture
is for dolls and stuffed
animals only. It is not
to be used with real
infants or with pets.
Children should NEVER
attempt to sit or stand on
the cradle.
CARE INSTRUCTIONS:
Wipe the doll cradle clean with a
damp cloth and mild soap as
needed. Never immerse the
cradle body/rockers in water or
any liquid. The fabric parts are
made with poly/cotton fabric. For
longevity of the product, we
recommend spot cleaning or
gently hand washing as needed;
however you can machine wash
the fabric parts in cold water,
gentle cycle and air dry or tumble
dry on low if desired.
Cx2
Ex2
Hardware not to scale
1.0/0407/TG
STEP 1 - PICTURE 1: Assemble the rocker base using the TWO ROCKERS (A), ONE BAR
(B), and TWO SCREWS (C).
The countersunk holes on the rockers face out for the heads of the screws. The threaded inserts on
the bar face up for use in STEP 2.
STEP 2 - PICTURE 2: Attach the CRADLE BODY (D) to the BAR (B) using TWO BOLTS (E).
Insert the bolts through the cradle body and screw them into the threaded inserts on the bar.
STEP 3 - PICTURE 3: Dress the FABRIC LINER (F) onto the CRADLE BODY (D). Dress
the FABRIC SHEET (G) onto the MATTRESS PAD (H) and put them inside of the CRADLE
BODY (D).
The WICKER DOLL CRADLE is now assembled!
PICTURE 2PICTURE 1
B
A
D
E
PICTURE 3
Page 3 of 3
G, H
A
F
1/3