Linksys MFELX1 Quick Installation
- Category
- Network transceiver modules
- Type
- Quick Installation
This manual is also suitable for
BUSINESS SERIES
QUICK INSTALLATION
100BASE-FX MiniGBIC
SFP Transceiver,
100BASE-LX MiniGBIC
SFP Transceiver
Package Contents
Transceiver
Quick Installation Guide
•
•
Model: MFEFX1, MFELX1
Connect the Transceiver
Insert the MiniGBIC SFP
Module with the printed
side up and the rubber
port cap facing out.
Remove the MiniGBIC SFP
Module’s rubber port cap.
Connect the fiber cable’s
LC connector to the
MiniGBIC SFP Module’s
port.
Connect the other end
of the cable to an SFP
Module to verify that
the fiber connection is
complete.
The Transceiver’s hardware installation is now complete.
1�
A.
B.
C.
D.
Insert the ModuleInsert the Module
Remove the Rubber Port CapRemove the Rubber Port Cap
Connect the Fiber CableConnect the Fiber Cable
Connected Fiber CableConnected Fiber Cable
Removal Instructions
Press the fiber cable’s
connector and pull to
remove the fiber cable
from the MiniGBIC SFP
Module.
Pull the Module’s bail
latch down.
Remove the MiniGBIC SFP
Module.
WARNING: Optical SFPs use a small laser to generate the
fiber‑optic signal. Because invisible laser radiation may be
emitted from the aperture of the port when no fiber cable is
connected, avoid exposure to laser radiation and do not stare
into open apertures. Keep the optical transmit and receive
ports covered whenever a cable is not connected to the port.
2�
A.
B.
C.
Remove the Fiber CableRemove the Fiber Cable
Pull the Bail Latch DownPull the Bail Latch Down
Remove the ModuleRemove the Module
24-Hour Technical Support
800-326-7114
(toll-free from US or Canada)
E-mail Support
Website
http://www.linksys.com
http://support.linksys.com
For warranty and regulatory information, refer to the User Guide on the website.
Additional support is also available via e-mail or by phone.
Linksys is a registered trademark or trademark of Cisco Systems, Inc.
and/or its affiliates in the U.S.. and certain other countries.
Copyright © 2006 Cisco Systems, Inc. All rights reserved. Other brands
and product names are trademarks or registered trademarks of their
respective holders.
6110610NC‑RR
International Website
http://www.linksys.com/international
RMA (Return Merchandise Authorization)
http://www.linksys.com/support
FTP Site
ftp://ftp.linksys.com
Sales Information
800-546-5797 (800-LINKSYS)
Switch Compatibility List
Linksys 100M SFP Switch Support and Minimum Software Release Requirements
Switch Model MFEFX1 ‑ 100 SFP MFELX1 ‑ 100 SFP
SRW208G Firmware 1.0.3 Firmware 1.0.3
SRW208L Firmware 1.0.3 Firmware 1.0.3
SRW208P Firmware 1.0.2 Firmware 1.0.3
SRW208MP Firmware 1.0.2 Firmware 1.0.3
SRW2008 Firmware 1.0.2 Firmware 1.0.3
SRW2008P Firmware 1.0.2 Firmware 1.0.3
SRW2008MP Firmware 1.0.2 Firmware 1.0.3
SRW224G4 Firmware 1.2.2 Firmware 1.2.2
SRW248G4 Firmware 1.2.2 Firmware 1.2.2
SRW224G4P Firmware 1.0.1 Firmware 1.0.1
SRW248G4P Firmware 1.0.1 Firmware 1.0.1
SRW2024P Firmware 1.0.3 Firmware 1.0.3
SRW2016 Not Supported Not Supported
SRW2024 Not Supported Not Supported
SRW2048 Not Supported Not Supported
3�
-
1
-
2
-
3
-
4
Linksys MFELX1 Quick Installation
- Category
- Network transceiver modules
- Type
- Quick Installation
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Cisco Systems SLM2024 User manual
-
Cisco Small Business 200 Series Smart Switches Installation guide
-
Cisco Systems SF302-08PP User manual
-
Alcatel 6648 User manual
-
-
D-Link DFL1660AV12 Datasheet
-
Alcatel OmniSwitch 6648 User manual
-
AirLive SNMP-GSH2404L User manual
-
-