Black Box EME1K1-015 Owner's manual

Brand: Black Box

Model: EME1K1-015

Type: Owner's manual

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: info@blackbox.com

Customer

Support

Information

February 2010

MT1000A-85-R4

BL A C K B OX®

Controls the electrical power to devices

over the Internet.

Relay contacts rated at 15 A/220 VAC.

AlertWerks™ Power Switch, 5-ft. (1.5-m) Cable

EME1P1-005

EME1P2-005

EME1PDC-005

Specifications

10 Amps Fuse — EME1P1-005–EME1P2-005: 380 VAC;

EME1PDC-005: 250 VDC

Carry Current — 10 A

Contact Rating — EME1P1-005–EME1P2-005: 10 A;

EME1PDC-005: 10 A @ 48 VDC

Maximum Input Voltage — 110–220 VAC, 250-VDC

Maximum Operating Current — 10 A

Maximum Operating Voltage —

EME1P1-005–EME1P2-005:

380 VAC;

EME1PDC-005: 125 VDC

Maximum Output Voltage —

EME1P1-005–EME1P2-005: 110–220 VAC;

EME1PDC-005: -48 VDC

Maximum Switching Capacity — With resistive load:

4000 VA, 480 W;

With inductive load: 2000 VA, 240 W (P.F=0.4)

Minimum Permissable Load —

EME1P1-005–EME1P2-005: 100 mA, 5 VDC;

EME1PDC-005: 100 mA, 2 VDC

PCB Copper Track Rating — 10 amps

Connectors — (1) RJ-45 (connection to AlertWerks hub),

(1) 2-position terminal block

Indicators — (4) Status LEDs: (1) Relay, (1) Power Supply,

(1) DC Line Voltage, (1) DC Load Voltage

Power Consumption— Typical 471.00 mWatt, 94.20 mA

Temperature Tolerance — Operating: -40 to +185° F

(-40 to +85° C);

Storage: -40 to +185° F (-40 to +85° C)

Size — 1.5"H x 4.5"W x 3.1"D (4 x 11.5 x 8 cm)

Weight — 0.6 lb. (0.3 kg)

To continue, turn this page over…

BL A C K BOX®

FREE, live, 24/7 Tech Support is just 30 seconds away.

724-746-5500 | blackbox.com

Technologies, Inc. Any third-party trademarks appearing in this publication are acknowledged to be the property of their respective owners.

EME1P1-005, version 1

Overview

The AlertWerks Power Switch, 5-ft. (1.5-m) Cable controls the electrical power to devices over the Internet. It configures and inte-

grates easily with the AlertWerks ServSensors (EME102A, EME108A, and EME134A).

The power switch provides one high-power SPST 5V relay. It includes metal oxide varistors (MOVs) and snubber circuits to protect

the relays’ open contacts from high voltage spikes or noise transients. It monitors the power and load and accepts a control signal

sent from the ServSensor.

Features

• Metal oxide varistors (MOVs) and snubber circuit protect the relays’ open contacts from high-voltage spikes.

• Power cords (included) support up to 6 A.

• IEC connector rating is 10 amps for 220 VAC, 10 amps for 110 VAC, and 10 amps for 48 VDC.

• Four LEDs indicate the status of the relay, power supply, AC line voltage, and AC load voltage.

• Use up to two power switches per ServSensor (EME102A, EME108A, or EME134A).

• Autosensing disconnect alarm.

Black Box EME1K1-015 Owner's manual

Black Box EME1K1-015 Owner's manual

Black Box EME1K1-015 Owner's manual

Related papers

Other documents