Astria Fireplaces MLDVTCD Instruction Sheet

  • Hello! I've reviewed the installation instructions for IHP standard safety guards. This document explains how to install the safety guard to reduce the risk of burns from hot fireplace glass. It covers steps for attaching the guard to various IHP gas fireplace models, using existing clamps and without the need for tools. I'm ready to answer your questions about its installation process and features.
  • What is the purpose of the safety guard?
    Do I need special tools to install the safety guard?
    When should I install the safety guard?
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
1
KIT CONTENTS
(1) ea. Safety Guard
REQUIRED TOOLS
No Tools Required
GENERAL INFORMATION
This optional Safety Guard is designed to reduce the risk of burn
injury associated with incidental contact with the glass front of the IHP
and Superior Gas Fireplaces listed in Table 1 on Page 2, when it is
installed and used in accordance with both these instructions and the
warnings, precautions, and instructions included in the INSTALLATION
INSTRUCTIONS AND CARE AND OPERATION manuals provided with
your appliance.
NOTE: Improper or repeated installation and removal of the
optional Safety Guard could scratch, dent, or otherwise deface
the metal frame surrounding the glass front of the appliance.
HEARTH PRODUCTS
KITS AND ACCESSORIES
P/N 506019-67, Rev. D
11/2015
GAS FIREPLACE
STANDARD SAFETY GUARD KIT
INSTALLATION INSTRUCTIONS FOR STANDARD SAFETY GUARD KIT
FOR USE ON IHP GAS FIREPLACE MODELS LISTED IN TABLE 1
INSTALLATION INSTRUCTIONS
Step 1. If the fireplace is on, turn it OFF. Allow it to cool completely.
BEFORE CONTINUING, FIREPLACE MUST BE OFF AND COLD!
Step 2. See Figure 1. Remove the fireplace top panel (if applicable).
Step 3. See Figure 1. Open the fireplace lower access panel, and then
release the two glass panel lower clamps.
Step 4. See Figure 2. Hook the Safety Guard top flange over the glass
panel top flange.
Step 5. Firmly insert the Safety Guard bottom flange into the glass
panel bottom flange.
Step 6. See Figure 3. Reclamp the two lower clamps, making sure
to capture the lower flanges of both the Safety Guard and the
glass panel.
Step 7. See Figure 1. Close the fireplace lower access panel. Replace
the top panel, if applicable.
NOTICE
READ ALL STEPS BEFORE STARTING INSTALLATION.
THESE INSTRUCTIONS MUST BE LEFT WITH THE APPLIANCE.
ALL WARNINGS, PRECAUTIONS, AND INSTRUCTIONS IN THE
INSTALLATION INSTRUCTIONS AND CARE AND OPERATION MANUALS
PROVIDED WITH THE APPLIANCE ALSO APPLY TO THESE INSTRUCTIONS.
IF YOU ENCOUNTER ANY PROBLEMS, NEED CLARIFICATION OF THESE
INSTRUCTIONS, OR ARE NOT QUALIFIED TO PROPERLY INSTALL THIS KIT,
CONTACT YOUR LOCAL DISTRIBUTOR OR DEALER.
CAUTION
INSTALL ONLY WHEN THE FIREPLACE IS OFF AND COLD!
Hot Fireplace Will Cause
Severe Burns
Never Allow Children to
Touch Glass or other Fire-
place Parts
WARNING
Figure 1
Front
Glass Panel
Fireplace Top Panel
(if applicable)
Fireplace Lower
Access Panel
Glass Panel
Lower Clamps Figure 3
Make sure each glass panel
lower clamp captures BOTH
bottom flanges (on Safety
Guard and glass panel).
Glass Panel
Lower Clamp
(one of two)
“Nested”
Bottom
Flanges
10/29/2015
Figure 2
Safety Guard
Bottom Flange
Glass
Panel
Bottom
Flange
Glass
Panel
Top
Flange
Safety Guard
Top Flange
2
INNOVATIVE HEARTH PRODUCTS • SCREEN ENHANCEMENT KIT SE-01 • INSTALLATION INSTRUCTIONS
STANDARD SAFETY GUARDS
Fireplace Application
Fireplace Model Safety Guard Cat. No.
and Required Quantity
• CDCL • EBCL • EDCL
• CDCR • EBCR • EDCR
• EBVCL • EDVCL
• EBVCR • EDVCR
Order qty. (1) #H8241
AND qty. (1) #H8257
• CDPF • EBBAY • EDPF • SDVPF
• EBPF • EDVPF • SSDVPF
• EBVPF
Order qty. (2) #H8241
AND qty. (1) #H8257
• CDST • EBST • EDST • SDVST
• EBVST • EDVST • SSDVST
Order qty. (2) #H8241
• MLDVT 30 • SLDVT 30
• MPLDV 30
Order qty. (1) #H8252
• MLBV 35 • SLBV 35
• MLDVT 35 • SLDVT 35
• MLDVTCD 35
• MPLDV 35
Order qty. (1) #H8244
• DR 400 • LMDVR 3328 • MPB 3328 • SSDVR 3328
• LMDVT 3328 • MPDR 3328 • SSDVT 3328
• MPDT 3328
Order qty. (1) #H8242
• B 500 • DR 500 • LMDV 3530 • MPB 3530 • SDV 35
• DT 500 • MPD 3530 • SSBV 3530
• SSDVR 3530
Order qty. (1) #H8240
• MPD 35PF Order qty. (2) #H8241
AND qty. (1) #H8256
• MPB 35ST
• MPD 35ST
Order qty. (2) #H8240
• ED 3530 • SDDV 35
• EDR 3530
• EDV 3530
Order qty. (1) #H8246
• B 600 • DR 600 • ED 4035 • MPB 4035 • SDDV 40
• EDV 4035 • MPD 4035 • SSBV 4035
• LMDV 4035 • SSDVR 4035
SSDVT 4035
Order qty. (1) #H8241
• B 800 • D 800 • ED 4540 • MPB 4540
• DR 800 • EDV 4540 • MPD 4540
• DT 800
Order qty. (1) #H8243
• ELDV 35 • SYM 35 Order qty. (1) #H8247
• ELDV 40 • MLBV 40 • SLBV 40
• MLDVT 40 • SLDVT 40
• MPLDV 40 • SYM 40
Order qty. (1) #H8245
• ELDV 45 • MLDVT 45 • SLDVT 45
• MPLDV 45 • SYM 45
Order qty. (1) #H8248
Table 1
STANDARD SAFETY GUARDS
Catalog/Model Cross-Reference
Safety Guard
Cat. No.
Safety Guard
Model No.
H8240 SG-01
H8241 SG-02
H8242 SG-03
H8243 SG-04
H8244 SG-05
H8245 SG-06
H8246 SG-07
H8247 SG-08
H8248 SG-09
H8252 SG-10
H8256 SG-11
H8257 SG-12
Table 2
Printed in U.S.A. © 2011 Innovative Hearth Products
P/N 506019-67 Rev. D 11/2015
IHP reserves the right to make changes at any time, without notice, in design, materials,
specifications, and prices, and also to discontinue colors, styles, and products. Consult your
local distributor for fireplace code information.
1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210
/