Bintec-elmeg 1090640 Datasheet

Category
IP add-on modules
Type
Datasheet

This manual is also suitable for

20 programmable keys with LEDs
2 additional LEDs for the display of status messages
3 cascading levels (power supply required)
Employees of the company can be reached by pressing a key
An LED shows the status of the subscriber
Asigns a key to phone lines for alternation between lines
Controlling of PBX functions via keys
Sophisticated extension of 20 keys for CS410 and IP-S400
elmeg T400
elmeg T400
14.01.2015
Subject to technical alterations
Page 2 / 2
bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: [email protected] - www.bintec-elmeg.com
Sophisticated extension of 20 keys for CS410 and IP-S400
20 function keys can be programmed on 2 levels and are equipped with an LED for level 1.
Variants
elmeg T400 icegrey (1090640) Extension console for CS410/CS410-U/CS400xt/IP-S400, with 2 x 10 keys incl. LED,
ice-gray color, useable as line, extension, function, macro or short dial keys, up to
3 units cascadable, power supply needed beginning with the 2nd console
elmeg T400 blackblue (1090216) Extension console for CS410/CS410-U/CS400xt/IP-S400, black-blue color, with 2 x
10 keys incl. LED, useable as line, extension, function, macro or short dial keys, up
to 3 units cascadable, power supply needed for the 2nd and 3rd console
Accessoires
System Phones for elmeg PABXs
Power supply unit elmeg T400 (5520000032) Beginning with the 2nd extension console elmeg T400 a power supply is needed.
The power supply feeds the 2nd and 3rd console.
elmeg T400
  • Page 1 1
  • Page 2 2

Bintec-elmeg 1090640 Datasheet

Category
IP add-on modules
Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI