Funkwerk CS400xt Operating instructions

Category
Telephones
Type
Operating instructions

This manual is also suitable for

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Telephone display and buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Description and Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Telephone operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Configuration settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Declaration of conformity and CE mark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Display und Tasten des Telefons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Beschreibung und Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Telefonieren . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Telefon bedienen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Einstellungen in der Konfigurierung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Konformitätserklärung und CE-Zeichen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Afficheur et touches du téléphone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Description et installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Téléphoner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Utilisation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Réglages dans la configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Déclaration de conformité et marque CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Display e tasti del telefono . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Descrizione e installazione . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Telefonare. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Rubrica telefonica . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Impostazioni nella configurazione. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Dichiarazione di conformità e marcatura CE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pantalla y teclas del teléfono . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Descripción e instalación . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Telefonear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Programar guía telefónica. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Ajustes en la configuración . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Declaración de conformidad y símbolo CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Svenska . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Display och telefonens knappar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Beskrivning och installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Telefonera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Telefonkatalog programmering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Inställningar i konfigureringen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Konformitetsförklaring och CE-märken . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
I
1
elmeg CS410 / CS410-U / CS400xt / IP-S400
English
Operating instructions
Telephone display and buttons
1 Speaker
2 Handsetwithconnectingcord
3 Answering machine button on the telephone (optional module) or »PABXmenubut-
ton
4 6Softkeys
5 Seven-linebacklit display
6 Menukey:Thiskeyopenstheprogrammingmenu. Ifyouarealreadylocatedinamenu
and then press the key, either menu-specific functions are shown, or you are moved
backoneprogrammingstep.
7 ESCkey:PressingtheEscbuttonduringprogrammingreturnsthetelephonetoitsidle
status.
8 / 10
Arrowbutton»Totheleft« /»Totheright«:Thearrows » {«and»} «inthe rightcor
-
neronthetoplineofthedisplayindicatethatyoucancallupfurtherfunctionsonthelo
-
werlinesusingthearrowbuttons.
9 OKkey:Pressingthisbuttonconfirmsan entryorstoresasettinginthetelephone.
11 Ckey:Pressthisbuttontomovebackonemenustepinthemenu. Ifyouarecurrentlyin
theinputmode, thisbuttoncanbe usedtodeleteindividualcharacters.
12 Asteriskkey/hashkey
13 Dialbuttons
14 Openlistening/hands-freebutton
15 Endingacall
16 Redialbutton
17 Enquirybutton
18 Microphone
English
2
1
2
3
4
5
18
19
20
21
12
13
14
15
16
1
7
6
7
8
9
10
11
Figure 5
19 Five programmable function keys with LED: Eachbutton has aninset two-color LED
(level1 -red/level2- yellow).TheseLEDscanbeusedtoindicatecertain functions.
20 Labelpanelforfunctionkeys
21 Callsignaling(red)andansweringmachine(yellow)LED
Description and Installation
These operating instructions describe only the most important routines for using the telephone.
Detailed information and documentation can be found on the CD-ROM.
CS410
This system telephone is designed for connection toan internal S0-port (4 wires) ofan elmeg pabx system.
If you wish to connect the telephone to an internalUp0-port, be sure toinstall the internal Up0/S0-module
into the telephone or use the external Up0/S0-converter.
CS410-U
This system telephone is designed for connection to an internal Up0-port (2 wires) of an elmeg pabx sys
-
tem. The internal Up0/S0-module or the external Up0/S0- converter are then no longer required.
CS400xt
Thissystemtelephoneisdeliveredwitha keyextensionmodule (T400/2), providingyou with10 additional,
freely configurable keys.
Itisdesignedfor connection to an internal S0 port(4-wirecable)ofaPABX system. The system telephone is
not equipped with a USB or serial port for configuration or other uses. This phone must be configured via
the internal ISDNport usingthe WinTools Professional Configurator. There are also no »Audiofunctions«
implemented and you can not use the Answering machine or Up0 modules or functions. None of the
functions for this module are shown in the display, nor can they be used.
Thistelephone is equippedwith the function »Emergencyoperation«, mea
-
ning it can be operated at NT via the PABX system on a loss of 230 V~ po
-
wer.Please note that yourPABXsystem supports thisfeatureand that itcan
not be used via a Up0/S0 converter.
elmeg IP-S400
Connectthissystemtelephoneto thecorrespondingLANport(ornetwork)ofthePABXsystemusing a Cat.
5cable.Thesystemtelephoneis equipped with a PCoutputthatcanbeusedtoconnectotherIPterminalde
-
vices.
Setting up/ Configuring the system telephone
On the system telephone itself you can only carry out a limited configuration of the supported features. A
fullconfigurationis only possible withanelmegtelephonesystemusingtheprofessional WIN tool configu
-
rator via the corresponding system telephone interface.
You will find additional information on the configuring of the system telephones in the detailed
instruction manual on the CD-ROM.
English
3
OFF
ON
System telephone extension modules
•
Modul Up0/S0 (CS410)
•
Answeringmachine module (CS410)
•
Additional »T400«,»T400/2« keyboard(CS410, IP-S400)
Safety notes
•
Mind the storage and operation temperatures for the device listed in the technicalspecifications.
Only connect thedevice when the permissible ambient operating temperature has been reached.
•
Please note that condensation on or in the unit must be prevented when moving fromcold to warm
surroundings.Onlyremovethe unit from the package whenthepermissibleambientoperatingtem
-
perature has been reached.
•
You should not make calls or connect or disconnect any lines during thunderstorms.
•
Only attach the connecting cords atthe connections provided.
•
Make sure phone cables are installed ina safemanner to prevent tripping.
•
Avoid the following:
Direct sunlight
Sources of heat (for example radiators)
Electronic devices (for example stereo components, officeequipment or microwave devices
Ingress of moisture or liquids
Aggressive fluids or vapors
Dusty environment
• Do not use the unitin excessively humid rooms or hazardous locations.
• Only open thosesections ofthe device specified in theassembly /operating instructions.
• Do not touch plug connectors with pointed,metal, ormoist objects.
• Ifyoudo not permanently mount the device or anyaccessories,besureto place it/them on a non-slip
surface.
•
When required, clean the unitwith a slightly moistened cloth.
•
Only use approved accessories.
•
OnlyterminalswithSELVand/or which comply with ETS 300047may beconnected to the unit. This
regulation is fulfilledwhen approved terminaldevicesare usedas intended.
Plug-in power supply
•
Use only approved power plug-in units (DSA-0101F-05 UPor L15 D52 ABDDLAWO).
•
Do not use power plug-inunits withvisible defects or damage (fissures, cracks, etc.)
Elektrostatic charges
The telephone is supplied with enhanced ESD protection against the effects of electrostatic discharge that
exceeds the protection level cited in the approval specification. Elevated ESD levels should nevertheless be
avoided to the greatest possible extent. In some cases, electrostatic discharge levels can far exceed the ap
-
proval limits or the resistance levels already implemented in your telephones. Eliminate the causes or con
-
ditions that promote these elevated ESD levels, such as insufficient humidity or carpeting. The telephone
manufacturer does not assume any liability for damage caused under such circumstances.
English
4
Unpacking and placing the telephone
Unpacking
•
ISDN system telephone
•
Handset with handset connecting cord
•
2 feet
•
ISDN connecting cord (approx.6 m)
•
PC-Connection cable (USB,ca. 3M), (not withCS400xt)
•
PC-audio cable (3.5mm stereo plug, ca. 2.5m), (not withCS400xt)
•
Adapter cord forheadsets with a 4 pinconnecting cord (8 pin / 4 pin)
•
Cable holder (self-adhesive after removingthe film), (not withCS400xt)
•
Operating instructions and labels for function keys
•
WIN-Tools CD-ROM with:
Professional Configurator, telephone, Download and Sound Manager,
TAPI-, USB-, CAPI- and NDISWAN-drivers, AdobeAcrobat Reader,
Operating instructions and Adobe Acrobat file forthe printingof individual labels
Placing the telephone
Before placing the telephone, mount the rear feet at the positions (6) shown in figure 6.
Please note that the plastic feet of your ISDN system telephone may leave marks on sensitivesurfaces, such
as furniture. The manufacturer of the ISDNsystem telephoneisnot liablefor any suchdamage. Therefore,
use appropriate non-skidding pads under the phone.
Cleaning the telephone
The ISDN system telephone has been manufactured for normal, everyday use. When required, clean the
ISDN system telephone with a slightly moistened cloth, or with an anti-static cloth. Never use a solvent to
clean the phone! Never use a drycloth. Electrostatic charges could damage theelectronics in the system. It
is essential that no liquids penetrate into the inside of the ISDN system telephone,as this could destroy the
phone.
Connecting the telephone (ISDN and handset cords)
PleaseconnecttheISDN cableandthehandsetcable.Otherwiseyou will notbeabletooperatethephone.
Connecting the handset connecting cord
Connect the handset cord (1) as shown in figure 6.
Lay the handset cord inthe cord groove (4) and lock
it below the two cord retainers (5).
English
5
1
2
3
4
4
4
5
5
6
6
7
Figure 6
Connecting the ISDN cord
Connection to the S0 (CS400xt CS410)
Connect the ISDN cord (2) as shown in figure 6 (S0-connector). Ensure that the longer ISDN connector is
plugged into theISDN socket and theshorter ISDN connector into the ISDN socket on thetelephone. Then
lay the ISDN cord in the cord groove (4) and lock it below the two cord retainers (5).
Connection to the Up0 (CS410-U)
Connect the ISDN cable (2) as shown in figure 3
(Up0-socket). Ensure that the longer ISDN connec
-
tor is plugged into the ISDN outlet and the shorter
ISDN connector into the ISDN socket on the tele
-
phone. Then lay the ISDN cord in the cord groove
(4) and lock it below the two cord retainers (5).
CS410 telephones equipped with a Up0/S0 module or CS410-U phones may not be connected
through the S
0-socket (3) to the ISDN connection (e.g. internal ISDN port of the PABX) .
Important notes for the UP0-connection
• An ISDN terminal device equippedwith S0-port can beconnected tothe phone's S0-jack.
• The maximum line distance between the elmeg CS410-Uand any downstream ISDN terminal devi-
ces may not exceed 10 meters.
• Terminatingresistors may not beconnected.
elmeg IP-S400 at the Ethernet-port
1
-
Connection for plug-in power
supply unit
2
-
Plug-in power supply unit
3
-
Ethernet PC-Connection
4
-
PC or other IP-telephone
5
-
Ethernet-port of the pabx
6
-
elmeg pbx
English
6
2
3
1
4
5
Figure 3
Figure 4
Connecting to and operating the system telephone at the pabx system (basic function including
DHCP)
Consult the installation instructions for the PABX system to determine which port canbe used for connec
-
ting the IP-S400. Connect this port with the Ethernet PABX port on the system telephone.
•
Configure your PABX system for use withIP system telephones.
•
Define the MSNs for the IP systemtelephones within thePABX system.
•
Switch on the power (plug-in power supply unit) to the IP system telephone and wait until the tele
-
phone has beeninitialized.
OncetheIP system telephonehasbeeninitialized you willberequestedtoselectthelanguage inthedisplay.
•
Select the display language.
Press the buttons to view the available langua
-
ges.
Which Country? }
Italiano
Español
Deutsch
®English
Française
Nederland
• Enter one of the MSNs that has been inputto the PABX system (in the exampleshown here, 12) .
Confirm your entry by pressing
O
. Programm dial number
MSN-1>12
If no PIN has been entered in the system con-
figuration, press button
O
and button
O
again after being requested to do so.
IPS login PIN for sys
server
MSN-1>
• Swtich to Use DHCP.
Select »on«. Use automatic IP
adress setting
off
on®
•
The telephone andPABX system are synchronized.
If there is no connection to the PABX system (no LAN link, or the telephone has not been logged
in),thesymbol l » -----/ /----‰ « willbeshowninthe display instead of thetime.
You can now use the IP system telephone at the ISDN or UP0 port.
Changing the label
Thelabels for thefunction keys are provided onthe last pageof this operatingmanual. Cut out the label you
wish to use.
To change the label panel, press the flexible cover together between your index finger and thumb and lift it
out. The label panel can now be changed.
You can fillin the labelpanel via your PC yourself. The CDROM supplied with the system contains an Ado
-
be Acrobat file with templates.
English
7
Pictograph
The pictographs (symbols) describedas follows have been used inthese operating instructions to illustrate
some petting and using the telephone.
b Liftupthe handsetorstartinitializingselection.
a Replacehandset.The telephoneisidle.
l Acallis signaled.Theringingtonemelodysounds.
g Youareconductingacall.
d Athree-partyconferencecallisinitiated.
q Youhearthepositiveornegativeacknowledgementsignal.
t Selectthenumber,code,characterortext.
09
*#
Presstheappropriate button onthepush-buttonset.
Country-specific settings
Certain specific parameters need to be set if the telephone is to be used in a country other than the country
configured as default.
This includes setting the language, the currency and certain default specific parameters for a country’s
ISDN network.
Check as describedas follows whether youneed to setcountry-specific parameters forthe country inwhich
the telephone is to be used.
Begin as follows:
a
Ms s
t
O>s
Konfigu
-
ration
Service
Telephone PIN
Country
s Press the arrow keys to view the countries, for
which specific settings are available.
Press the softkey for the desired country. For
example: »English«.
Which Country? }
Italiano
Español
Deutsch
®English
Française
Nederland
All country-specific settings take effect imme
-
diately. The telephone data will not be dele
-
ted.
29.05.06 07:41 }
Tel. drctry
Quiet
VIP
English
8
Telephone display
1
-
Date
2
-
Time
3
-
21 characters per line
4
-
Arrow: Further menu items accessible by using the ar
-
row keys.
5
-
Answering machine button on the telephone (optional
module) or »PABX menubutton
6
-
Arrow: Indication of the softkey that can be used in the
current menu.
The telephone is equipped with a seven-line backlit display. Backlighting is automatically switched on or
off.
After you connect the system to the internal ISDN connection of your pabx system, the date and time are
shown on the top line of the display. The date and time are imported automatically from the pabx system.
The text displayed for a function is always located next to the corresponding softkey. When you press the
softkey, the next level is displayed. If not all information fit into the screen, this will be indicated by »««or
»««. To view further characters, press the R key and then use the corresponding arrow key.
Various telephone display shots are illustrated in this operator’s manual to help explain the different set-
tingsanduseofthesystem.Awavy line at the top or bottomofanillustrationindicatesthatnotallof the 7 li-
nes of that particular display are shown (only pertinent lines shown).
Use the buttons as follows when entering texts, letters digits or special characters:
Key Press
Key
1234567
1
1
2
ABC2ÄÅÆ
3
DEF3 €
4
GH I 4
5
JKL5
6
MNO 6 ÖØ
7
PQRS7ß$
8
TUV8Ü
9
WX Y Z 9 ¥
*
*
#
#
English
9
09.03.06 07:00
Figure 5
0 Several special characters are assigned to thebutton»0«. For specialcharacters, press
the0key.
Forexampe.:»!«,»&«,»?«,»+«,»-«,»=«,»(«,»)«,»@«,»$«,...
Input mode for entering letters
You have various possibilities for entering letters. The currently set input mode is displayed onthe top half
of the display on the right-hand side (no display, »Abc« or »ABC«).
»Abc« Thenextletterthatyouenterisshownasacapital,allothersassmallcaseletters.Exam
-
ple:»Dean, James«.
no display Everyletterthatyou enterisshownin smallcase.
Example:»dean, james«.
»ABC« Everyletterthatyou enterisshownas capitals.
Example:»DEAN, JAMES«.
When you startentering texts, the input mode is always »Abc«.Press the R key to change the in
-
put mode. To insert a character while in »Abc« mode, press the C key.
Displays for programmed features
s When the telephone is in the idle state, addi-
tional information about functions that have
been configured are shown on »Info« line
of the display. In this example:
»-D-I-q-«.
Press the softkey next to »Info« if you wish
to get more information about the configured
functions.
29.05.03 07:21 }
Info -D-I-q-
Tel. drctry
Quiet
VIP
Caller list
If you have programmed several features,
press the arrow buttons to view the various
settings.
ªªªªªªªªªªªªªªªªªªªªªª
Inhibit/Menu:
Guard for modificatio
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Display Configured function
»-D-«
Active appointment reminder set.
»-I-«
Dial ranges or call filter active,
Access to telephone menus is protected.
»-q-«
Function »Station guarding« (only brief signal) active.
»-Q-«
Function »Station guarding« (complete) active.
(All call signals are switched off)
»-U-«
Call forwarding active.
» -i- «
Information about programmed function keys
For example: Message enabled / inhibited.
» --«
Answering machine, timecontrol, call forwarding signaling or remote control areac
-
tivated (optional module).
English
10
Making Calls
Starting a call
Dial number - no correction possible
btg
Dial number
Dial number - correction possible
atbg
Dial number
To change the numberor to correct a wrongentry, selectthe wrong figure withthe arrow buttons and press
C key to delete it. Now enter the correct number.
If you wish to conduct the call using the handset, just lift it up after dialing the number. Any time during a
call you can switch back and forth between hands-free calling, speaker function and use of the handset.
After you have dialed the number you can also press the speaker button to have the number dialed and to
use hands-free calling.
If a call can not be put through (e.g. number is inhibited via the dial ranges control, or the account for the
number/MSN is empty), a corresponding message will appear in the display. For example: »Inhibit.
: MSN ext.«, when the dial range filter is active.
Other options for dialing without lifting the handset
The option of dialing without lifting the handset and ofcorrecting or addingto a number also exists during
dialing:
• from the redialingmemory.
• from the caller/ memo list.
•
from the telephonedirectory.
•
from the VIPmemory.
•
from the direct dialing memory.
•
via CTI, TAPI (CS 410) features.
Ifyouare using one of these options, youcanmakefurther entries prior to initiatingthe call. Youcan define
which number (MSN), if any, is to be transmitted to the party being called.
Dialing from the pabx telephone directory
When you use this telephone with a system telephony supporting pabx system, you can dial from the tele
-
phone directory of the pabx.
a
Rs
t
O<>O
b
Tel.
drctry
Enter first
letter
Select
entry
English
11
Dialing from the phone’s directory
You can store up to 250 names and numbers in the telephone directory. To select a name, you can page
through the directory using the arrow buttons, or enter the specific first letter(s) of the name using the
push-button set.
a
s
t
O<> O
bg
Tel. drctry
Enter first letter Select entry
For information on how to program and configure the telephone directory, please refer to page 15 of these
operating instructions.
Dialing from the VIP memory
YoucanprogramVIPnumbersforeach of the ten buttons 1 … 0 includinga name (20 charactersmax.)and
a telephone number (26 digits max.).
a
s
or
tbg
VIP
Select
VIP
destina
-
tion
Select VIP
destination
For information on how to program VIP entries, please refer to page 16 of these operating instructions.
Direct dialing with function keys
Direct dialing is initiated using the direct dialing keys. Each of the keys can be programmed with two
functions or direct dialing numbers.
a
Z
bg
Press the function key
Use the function keys to select the desired number.
Ifyouwishtodialanumberfromthesecondlevel,pressthecorrespondingkeytwo times. Thismust beexe
-
cuted at a short interval.
You can programthe direct dialing/ function keysvia the PCconfiguration program orthe extended confi
-
guration of the telephone.
Dialing from the caller/memo list
The phone has a combinedcaller and memo list. A maximum of 30 entries(calls, memos SMS messages or
UUS1- messages) are stored in this list. Entries in the caller or memo list are indicated by the »Caller
list« softkey.
a
s
b
Caller list
Select entry
Further functions
Accepting/rejecting a call
albg
English
12
Rejecting a call
al
s
reject
Forwarding a call (call deflection)
al
s
t
O
transfer
Dial number
Calling line identification (anonymus call) restriction
at
OM s
bg
Dial number
Concealed
al
s
bg
Concealed
Starting a call with a set number (MSN)
at
OMs s
bg
Dial number
MSN MSN-1 ...
MSN-10
Extended redialing
In the extended redialing the numbers of the last 20 calls, connections (conversations) and text messages
are stored. You can view these by pressing the redial button or the arrow buttons and subsequently have
them redialed automatically.
a
WWO
bg
Select entry
Automatic redialing
If you placed a call to asubscriber whose number is busy or who does notanswer, you can then activate au
-
tomatic redialing which will call that same subscriber again after about 10 seconds.
btg
W
or
s
a
Dial number Subscriber
busy
Autom.repeat
request
Deactivating automatic redialing
a
ss
Autom.repeat request Yes
Activating/ muting the microphone
g
s
Room enquiry
s
g
Mute speak
English
13
Speaker function
g
LL
g
Begin open listening End open listening
Hands Free Calling
a
L
t
L
Begin hands free calling Dial number End hands free calling
Headset use
For headset operation, oneof thefunctions buttons must be configured as a headset key. TheLED assigned
to this key indicates, whether the headset in switched on or off (LED on or off).
a
z
tg
z
activate headset Dial number Call via headset deactivate headset
Message
a
Ms>s
tg
Acou
stic
Message
Dial internal
number
message
Intercom
a
Ms>s
tg
Acou
stic
Inter-
com
Dial internal
number
intercom
Automatic completion of call
btg
s
a
Dial number Subscriber busy or
does not answer
Clbckbusy
Keypad
g
s
t
Keypad
Input of character strings and digit
sequences
Tone Frequency Dialing (DTMF dialing)
g
s
t
dtmf
Input of character strings and digit
sequences
Conducting calls with several parties
Call waiting
g
waiting call
(subscribers 2)
s
g
Call with subscriber 1
accept
Call with subscriber 2;
Party 1 is put on hold
English
14
Enquiry Call
g
R
tg
Call with subscriber Party 1 is put on hold Dial number Call with subscriber 2
Call transfer (switching)
g
R
tg
s
Call with subscriber 1 Party 1 is put on hold Dial number Call with subscriber 2
transfer
Broker’s call
g
>s
g
>s
g
Call with sub
-
scriber
Connection 1
...
Connection 4
Call with desi
-
red subscriber
Connection 1
...
Connection 4
Call with desi
-
red subscriber
Three-party conference
g
>s
g
s
d
Call with subscriber
1
Connection 2
Call with subscriber
2
Conferen
-
ce
Conference with
subscribers 1 and 2
Telephone operation
Telephone directory
You can store up to 250 names and numbers in the telephone directory. To select a name, you can page
through the directory using the arrow buttons, or enter the specific first letter(s) of the name using the
push-button set.
If the name of the caller is to be shown in the display instead of the caller’s number, this number
mustbeenteredinthetelephonedirectorywiththat name (includingprefixand, when used with a
PABX, the line access digit).
Display of thecaller name is onlymade when the transmittednumber corresponds tothe number
stored in the phone directory.
IfthetelephoneisdisconnectedfromtheISDNnetwork and then reconnected, or if the data forthetelepho
-
ne directory are transferred tothe system telephonevia thePC program, the directory must bereorganized
internally. This process takes place automatically and may require a few minutes. During this time, the te
-
lephone directory of your telephone is not available for use.
Settings for telephone book entries
•
Name and number
•
Outgoingnumber (MSN assignment)
•
Special dial (VIP tone) tone
•
Info text
English
15
Adding an entry to the telephone book
Begin as follows:
a
Msss
Program nos. Tel. drctry New
t Enter the name.
In this example: »Dean«.
Confirm your entry by pressing
O
.
Input telephone book
Name>Dean_
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
t Insert a number.
In this example: »0123456«.
Confirm your entry by pressing
O
.
Input telephone book
Number>0123456_
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
VIP Memory
YoucanprogramVIPnumbersforeach of the ten buttons 1 … 0 includinga name (20 charactersmax.)and
a telephone number (26 digits max.).
Making an entry into the VIP memory
Begin as follows:
a
M s s s <> O
Program nos. VIP New
Select VIP
destination
t Enter the name of the VIP target. In this ex-
ample: »Dean«.
Confirm your entry by pressing OK.
Program VIP name
V0>Dean_
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
t Insert a number.
In this example: »012345«.
Confirm your entry by pressing OK.
Program VIP number
V0>012345_
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Station guarding
Ifyoudo not wish calls tobesignaledwiththeprogrammedmelody and volume, you canactivethe»Station
guarding«feature.Dependingonthespecific setting, all calls willbedisplayedopticallyor along with a brief
acoustic signal. In the idle state an »q«or»Q« in the display shows that the function »Station guarding« is
activated.
»No« Thefunction»Stationguarding«isdeactivated.
»Ringing
signal off«
Callsaresignaledoptically only(»Q«showninthedisplay).
»ok« Calls are signaled first by a brief acoustic signal and then only optically displayed
(»q«).
English
16
a
ss
Quiet No/Ringing signal off/ok
Configuration settings
Telephone numbers (MSN extension numbers)
Up to 10 MSN (extension numbers) can be configured on your telephone. When you enter an MSN or ex
-
tensionnumberin your ISDNsystemtelephoneyouareessentiallydefiningthat your ISDN systemtelepho
-
ne is called using this MSN or extension number when a call is made. If you enter more than one MSN ex
-
tension number in your telephone, your phone will ring each time one of these MSN extension numbers is
called.
IfyouareusingyourtelephoneontheexternalISDNportofapabx,enteritsinternalextensionnumberinto
the pabx. Please observe the instructions in the PABX manual.
When you calla subscriber, you canselect a certain number (MSN) that is transmittedto the subscriber (e.
g. for separate charges). If you do not select any number, the number (MSN) that has been entered first in
the phone (MSN-1) is used.
How to configure an MSN (extension number) is described as follows for »MSN-1«.
Begin as follows:
a
Msss
Configurati-
on
MSN MSN-1
Program MSN-1 }
transfer
Volume
MSN Name
Sound
MSN ext.
Entering or viewing an MSN extension number (MSN)
You can only enter the MSN extension numbers with the Professional Configurator supplied on the
WIN-Tools CD-ROM. However, you can have the programmed number displayed at the phone.
In the »Program MSN-1« menu, press the »MSN ext.« softkey.
O The programmed number is displayed.
Press OK to leave this menu.
Program MSN-1 }
MSN-1:222
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
You can only make further settings (e.g. call signaling melody, volume, name) if the number has
already been previously configured.
More settings for each MSN extension number (MSN)
s »Sound« Setting the melody
English
17
s »Volume« Setting the volume
s »transfer« Programming a default call forwarding number
s »MSN name« Assign a name to the MSN extension number
s »Charge« Programming a charge limitation for a specific extension number
(MSN)
s »PIN« Assign a specific PIN for an externsion number (MSN)
Reset - Resetting to default state
You can reset the telephone to its initial state using the procedure described as follows. All of the data that
you have entered previously will be deleted.
If you have connected the elmeg T400, T400/2 key extension module to your phone all of the data for the
module will also be deleted when this procedure is executed.
Please note: Settings for the answering machine and any texts that have been stored will not be deleted.
Please refer also to the instruction manual supplied with your answering machine.
Begin as follows:
a
Ms s
t
Oss
Configu
-
ration
Service
Telephone
PIN
Data ok
s Press »ok« to reset the telephone to its initial
state. If you do not wish to have the data dele
-
ted press »No«.
Sure to delete all?
No
^ok
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
When you press the »ok« softkey, the tele
-
phone is reset to the default state. All data are
deleted.
Which language }
Italiano
Español
Deutsch
English
Française
Nederlands
English
18
Declaration of conformity and CE mark
This device meets the requirements of the following EC directive R&TTE 1999/5/EG:
»Directive 1999/5/EC of the European Parliament and of the Council of 9 March
1999 on radio equipment and telecommunicationsterminalequipmentandthemu
-
tual recognition of their conformity«.
You can also request this EC declaration of conformity at the following Internet
URL: http://www.funkwerk-ec.com.
The waste container symbol with the "X" through it on the device indicates that the
devicemustbedisposedofseparatelyfromnormaldomesticwaste at an appropriate
waste disposal facility at the end of its useful service life.
© 2006 Funkwerk Enterprise Communications gmbH - All rights reserved.
Reprintingof this document,even excerpts, ispermitted only withthe express consentof the publisherand
with precise source information, regardless of the media used (mechanical or electronic).
Function descriptions included in this documentation which refer to software products of other manufac-
turers are based on the software used and valid at the date the documentation was prepared or published.
The product and company names used in this documentation may be protected by trademarks.
English
19
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250

Funkwerk CS400xt Operating instructions

Category
Telephones
Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI