American Standard 2392202.020 User manual

Brand: American Standard

Model: 2392202.020

Category: Faucets

Type: User manual

H115

PRINCETON™ RECESS BATH

WITH INTEGRAL OVERFLOW

AMERICAST

BRAND ENGINEERED MATERIAL

PRINCETON™ RECESS BATH W/ INTEGRAL

OVERFLOW for Above Floor Rough Installation

Americast

brand engineered material

❏ 2392.202 ICH (Chrome Trim) Left Hand Outlet

for above oor installation

❏ 2392.202 ICHTC Same as above with Tub Cover

❏ 2393.202 ICH (Chrome Trim) Right Hand Outlet

for above oor installation

❏ 2393.202 ICHTC Same as above with Tub Cover

❏ 2392.202 IPB (Polished Brass Trim)

Left Hand Outlet

❏ 2392.202 IPBTC Same as above with Tub Cover

❏ 2393.202 IPB (Polished Brass Trim)

Right Hand Outlet

❏ 2393.202 IPBTC Same as above with Tub Cover

❏ 2392.202 IBS (Brushed Satin Trim)

Left Hand Outlet

❏ 2392.202 IBSTC Same as above with Tub Cover

❏ 2393.202 IBS (Brushed Satin Trim)

Right Hand Outlet

❏ 2393.202 IBSTC Same as above with Tub Cover

• Lift and turn drain stopper assembly included

with bath

• Escutcheon included and installed on bath

• Acid resistant porcelain nish

• Recess bath with integral apron and

tiling ange

• Integral lumbar support

• Beveled headrest

• Full slip-resistant coverage

• End drain outlet

Nominal Dimensions:

1524 x 762 x 445mm

(60" x 30" x 17-1/2")

Bathing Well Dimensions:

1423 x 635 x 337mm

(56" x 25" x 13-1/4")

Compliance Certications -

Meets or Exceeds the Following Specications:

• ASME A112.19.4 for Americast Plumbing Fixtures

• ASTM F-462 for Slip-resistant Bathing Facilities

• ANSI Z124.1 Ignition Test

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES

AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND

USEABLE BUILDING FACILITIES-CHECK LOCAL CODES.

INSTALL WITH SEAT AT HEAD END.

SEE REVERSE FOR PRODUCT DIMENSIONS

AND SPECIFICATIONS

Americast

brand engineered material is a composition of porcelain bonded

to enameling grade metal, bonded to a patented structural composite.

Revised 2/08

Photograph details integral overow and drain

assembly. Drain assembly included with bath.

BARRIER FREE

To Be Specied:

❏ Color:

❏ Bath Filler: (specify nish)

❏ Bath Drain: 1583.470 (specify nish)

To Be Specied - Optional:

❏ Pressure Test Kit

†

: 791363-0070A

*See faucet section for additional models available

†

Pressure Test Kit is necessary to seal overow and perform

system pressure test.

H116

Revised 2/08

1524mm

(60)

762mm

(30)

FINISHED

WALL

19mm

(3/4)

FINISHED

WALL

C/L OF DRAIN

197mm

(7-3/4)

ROUGH

FLOOR

445mm

(17-1/2)

FINISHED

WALL

362mm

(14-1/4)

48mm

(1-7/8)

SEE FITTING SPECS

FOR DIMENSION

C/L OF

SPOUT

C/L OF

VALVES

C/L OF

SHOWER ARM

435mm

(17-1/8)

25mm

(1)

1651-1981mm

(65-78)

OPTIONAL

1-1/2 N.P.S.M.

THREADS OR

1-1/2 O.D. TUBING

SLIP JOINT

102mm

(4)

305mm

(12)

SEE

NOTE

89mm

(3-1/2)

C/L OF

SUPPLIES

TILING FLANGE

GENERAL SPECS FOR 2392/2393ICH, IBS BATHING POOL

60 x 30 x 17-1/2 In. (1524 x 762 x 445mm)

121 Lbs. (55 Kg.)

471 Lbs. (214 Kg.)

42 Gal. (159 L)

42 x 19 In. (1067 x 483mm)

56 x 25 In. (1423 x 635mm)

9-1/2 In. (241mm)

38 Lbs./Sq.Ft. (182 Kgs./Sq.m)

7.4

21.2

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

)

NOTES

LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS.

(2393.202.ICH).

DRAIN AND OVERFLOW ESCUTCHEON INCLUDED WITH BATH.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH

FOR DRAIN INSTALLATION.

BATH FAUCET NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH FITTING.

CONCEALED PIPING NOT FURNISHED.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range

of tolerances established by ANSI Standard A112.19.4 These measurements

are subject to change or cancellation. No responsibility is assumed for use of

superseded or voided leaet.

STUD

SHIM

DRY WALL

TILE

SEALANT

TUB

ROOFING NAIL

STEEL

STUD

SHIM

DRY WALL

WASHER

TILE

SEALANT

TUB

4" (102mm)

DRYWALL

SCREW

WOOD STUDS STEEL STUDS

Below is shown typical cross sections of the tub

rim showing typical wall constructions.

51 x 102mm (2 x 4) WOOD

STRINGER FULL LENGTH

PRINCETON™ RECESS BATH

WITH INTEGRAL OVERFLOW

AMERICAST

BRAND ENGINEERED MATERIAL

BARRIER FREE

1 / 1

American Standard 2392202.020 User manual

Brand: American Standard

Model: 2392202.020

Category: Faucets

Type: User manual

Download PDF

Add to bookmarks

report

American Standard 2392202.020 User manual

American Standard 2392202.020 User manual

Related papers

Other documents