Transition Networks SFMFF4040-100-NA Datasheet

Transition Networks
Brand
Transition Networks
Model
SFMFF4040-100-NA
Category
Network media converters
Type
Datasheet

Transition Networks SFMFF4040-100-NA is a stand-alone media converter that provides Small Form Factor Pluggable (SFP) conversion. It has two SFP slots, allowing for seamless connectivity between different wavelengths or fiber modes for speeds up to 2.5Gbps. The converter is protocol independent, so it can be used in a broad range of applications including Fast and Gigabit Ethernet, FDDI, ESCON, SONET OC-3, OC-12, OC-48 and Fibre Channel.

Some of the key features of the SFMFF4040-100-NA include:

  • Automatic Link Restoration
  • Link Pass Through
  • CWDM and DWDM SFP-ready platform
  • Wide Input (18 – 72VDC) Power Supplies

Transition Networks SFMFF4040-100-NA is a stand-alone media converter that provides Small Form Factor Pluggable (SFP) conversion. It has two SFP slots, allowing for seamless connectivity between different wavelengths or fiber modes for speeds up to 2.5Gbps. The converter is protocol independent, so it can be used in a broad range of applications including Fast and Gigabit Ethernet, FDDI, ESCON, SONET OC-3, OC-12, OC-48 and Fibre Channel.

Some of the key features of the SFMFF4040-100-NA include:

  • Automatic Link Restoration
  • Link Pass Through
  • CWDM and DWDM SFP-ready platform
  • Wide Input (18 – 72VDC) Power Supplies
LINK PASS THR
U
LINK RESTORE
AUTO
Enterprise Application
Service Provider Application
Specifications
Standards Multi-Source Agreement (MSA), Small Form Factor
Pluggable (SFP)
Status LEDs LK1: Link on Port 1
LK2: Link on Port 2
PWR: Power
Dimensions Width: 3.25" [83 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]
Power Consumption 2 watts with TN-SFP-xx modules installed
Power External AC/DC required: 12 VDC 0.5A
Environment SFMFF4040-100 Board:
-10 – 60°C operating temp;
See SFP Module temperature ratings;
5% to 95% humidity
(non-condensing); 0 – 10,000 feet
Safety Compliance Wall Mount Power Supply:
UL listed and CSA certified
Regulatory Compliance FCC Class A; EN55024 (CISPR 22) Class A; ICES-
003; CISPRB;
CE Mark
Warranty Lifetime
Ordering Info
SFMFF4040-100
SFP Slot (empty) to SFP Slot (empty)
Optional Accessories
(sold separately)
SFP Modules
Wide Input (18 – 72VDC) Power Supplies:
SPS-1872-PS or SPS-1872-SA
Mounting Options:
E-MCR-05
12-slot Media Converter Rack
WMBD
DIN Rail Mount Bracket 5.0" [127 mm]
WMBL
Wall Mount Bracket 4.0” [102 mm]
RMS19-SA4-01
4-slot Media Converter Shelf
Universal platform to accommodate any
optical conversion options available via
SFP interfaces.
(2) SFP Slots for SFP interfaces
Protocol Transparency
SFMFF4040-100
stand-alone media converter
Optical Line Converter with SFP Slots
Optical Line Converter
Small Form Factor Pluggable Conversion
Features
CWDM and DWDM SFP-ready platform
Link Pass Through
Automatic Link Restoration
Monitor the physical layer of optical networks for
signal strength degradation. The user can spec-
ify the threshold for sudden signal strength de-
terioration. Such a change often indicates a
physical intrusion or fiber damage.
These converters offer an excellent upgrade path
for networks. Today’s Fast Ethernet applications
can be upgraded to Gigabit speeds tomorrow
with a simple SFP swap. The converter remains
installed, managed and fully operational at any
of these speeds.
Two SFP module slots allow for seamless con-
nectivity between different wavelengths or fiber
modes for speeds up to 2.5Gbps. Protocol inde-
pendence allows for use in broad range of appli-
cations including Fast and Gigabit Ethernet, FDDI,
ESCON, SONET OC-3, OC-12, OC-48 and Fibre
Channel.
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
[email protected]
http://www.transition.com
©2009 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
  • Page 1 1

Transition Networks SFMFF4040-100-NA Datasheet

Transition Networks
Brand
Transition Networks
Model
SFMFF4040-100-NA
Category
Network media converters
Type
Datasheet

Transition Networks SFMFF4040-100-NA is a stand-alone media converter that provides Small Form Factor Pluggable (SFP) conversion. It has two SFP slots, allowing for seamless connectivity between different wavelengths or fiber modes for speeds up to 2.5Gbps. The converter is protocol independent, so it can be used in a broad range of applications including Fast and Gigabit Ethernet, FDDI, ESCON, SONET OC-3, OC-12, OC-48 and Fibre Channel.

Some of the key features of the SFMFF4040-100-NA include:

  • Automatic Link Restoration
  • Link Pass Through
  • CWDM and DWDM SFP-ready platform
  • Wide Input (18 – 72VDC) Power Supplies
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents