MN5-0386-901 iii Revision 1
XTD-400C Operation and Installation Manual
About this manual
This manual provides operators and technicians with a set of
tools for operating and maintaining the Digital Outdoor Unit
Family of Xicom Power Amplifiers.
This Prefix contains a Table of Contents that applies to the
entire manual and a Record of Changes page that applies only
to this Prefix.
Each Chapter has its own Part Number, Revision Level, Record
of Changes page, Table of Contents, List of Figures, and List of
Tables.
Chapter One—Provides an overview of the manual; delineates
who should use the manual; how to contact Xicom Technology.
Chapter Two—Describes safety information that pertains to
Xicom Technology products. It also provides information about
Warnings, Cautions and Notes that are found throughout the
manual.
Chapter Three—Provides general installation information,
communication interface switch settings and cable pinouts.
Chapter Four—Provides the operating instructions for the power
amplifier.
Chapter Five—Describes updating Firmware and the preventive
maintenance requirements for Xicom Technology power
amplifiers.
Chapter Six—Provides information regarding service and repair
of Xicom Technology power amplifiers, including instructions on
obtaining RMA (Return Maintenance Authorization) Numbers.
List of Abbreviations and Acronyms—Lists the abbreviations
and acronyms that may be found in Xicom Technology
documentation.
Appendices—The Appendices provide operators and
technicians with information and specifications that are specific
to their particular version of Xicom Technology Power Amplifier.
EAR EXPORT CONTROLLED --- The attached documents contain technology and technical data within the definition of the
U.S. Export Administration Regulations (EAR). Transfer of this data by any means to a foreign person, whether in the
U.S. or abroad, may require a U.S. Department of Commerce export license or other approval.