Genesis GPS2303 User manual

1/4 Sheet Palm Sander

Ponceuse de paume 1/4 feuille

Lijadora de mano de 1/4 de hoja

GPS2303

Operator’s Manual

Manuel d’utilisation

Manual del Operario

English

1/4 Sheet Palm Sander

Operator’s Manual GPS2303

1/4 Sheet Palm Sander 1.5A

Operator’s Manual

Speciﬁcations:

• Model:  GPS2303

• Input:  120V~60Hz,1.5Amps

• NoLoadSpeed: 10,000OPM

• PadSize:  4-1/4"x4"(110mmx100mm)

• DustCollection Throughpad

Includes:Dustcollectionbag,Paperpunchplate,andSandpaperassortment

 WARNING:To reduce the risk of injury, user must read and understand

this operator’s manual before operating this tool. Save this Manual for future

reference.

Toll-Free Help Line: 1-888-552-8665

WARNING:TheOperationofanypowertoolcanresultinforeign

objectsbeingthrownintoyoureyes,whichcanresultinsevereeyedamage.

Beforebeginningtooloperation,alwayswearsafetygogglesorsafetyglasses

withsideshieldsandafullfaceshieldwhenneeded.WerecommendWide

VisionSafetyMaskforuseovereyeglassesorstandardsafetyglasseswith

sideshields.AlwaysweareyeprotectionwhichismarkedtocomplywithANSI

Z87.1.

Look for this symbol to point out important safety

precautions. It means attention!!! Your safety is

involved.

GENERAL SAFETY RULES

 WARNING:

Some dust created by power sanding, sawing, grinding, drilling, and other

construction activities contains chemicals known to cause cancer, birth defects

or other reproductive harm. Some examples of these chemicals are:

• Leadfromlead-basedpaints,

• Crystallinesilicafrombricksandcementandothermasonryproducts,and

• Arsenicandchromiumfromchemicallytreatedlumber.

Your risk from these exposures varies, depending on how often you do this

type of work. To reduce your exposure to these chemicals: work in a well

ventilated area, and work with approved safety equipment, such as those

dust masks that are specially designed to ﬁlter out microscopic particles.

WEARYOUR

FORESIGHTISBETTER

THANNOSIGHT

SAFETYGLASSES

English

 WARNING:READ AND UNDERSTAND ALL WARNINGS, CAUTIONS

AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure

to follow all instructions listed below may result in electric shock, ﬁre and/or

serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA SAFETY:

• Keep your work area clean and well lit.Clutteredbenchesanddarkareasinvite

accidents.

• Do not operate power tools in explosive atmospheres,suchasinthe

presenceofammableliquids,gases,ordust.Powertoolscreatesparkswhichmayignitethedust

orfumes.

• Keep bystanders, children, and visitors away while operating a power

tool.Distractionscancauseyoutolosecontrol.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Nevermodifythepluginanyway.Donot

useanyadapterplugsinanyearthed(grounded)powertools.Doubleinsulatedtoolsareequipped

withapolarizedplug(onebladeiswiderthantheother).Thisplugwilltinapolarizedoutletonly

oneway.Iftheplugdoesnottfullyintheoutlet,reversetheplug.Ifitstilldoesnott,contact

aqualiedelectriciantoinstallapolarizedoutlet.Donotchangethepluginanyway.Double

insulationeliminatestheneedforthethreewiregroundedpowercordandgroundedpowersupply

system.

•Donotexposepowertoolstorainorwetconditions.Waterenteringapower

toolwillincreasetheriskofelectricshock.

•Avoidbodycontactwithearthedorgroundedsurfacessuchaspipes,

radiators, ranges and refrigerators. Thereisanincreasedriskofelectricshockif

yourbodyisgrounded.

•Donotabusethecord.Neverusethecordforcarrying,pullingorunpluggingthepower

tool.Keepcordawayfromheat,oil,sharpedgesormovingparts.Damagedcordsincreasetherisk

ofelectricshock.

•Whenoperatingapowertooloutside,useanextensioncordsuitable

for outdoor use. Thesecordsareratedforoutdooruseandreducetheriskofelectricshock.

•DonotuseAConlyratedtoolswithaDCpowersupply.Whilethetoolmay

appeartowork.TheelectricalcomponentsoftheACratedtoolarelikelytofailandrateahazardto

theoperator.

PERSONAL SAFETY

• Stay alert, watchwhatyouaredoingandusecommonsensewhenoperatingapowertool.

Donotusetoolwhiletiredorundertheinuenceofdrugs,alcohol,ormedication.Amomentof

inattentionwhileoperatingpowertoolsmayresultinseriouspersonalinjury.

•Usesafetyequipment.Alwaysweareyeprotection.Safetyequipmentsuchasdust

mask,non-skidsafetyshoes,hardhat,orhearingprotectionforappropriateconditionswillreduce

personalinjuries.

•Dressproperly.Donotwearlooseclothingorjewelry.Keepyourhair,clothingandgloves

awayfrommovingparts.Looseclothes,jewelryorlonghaircanbecaughtinmovingparts.Air

ventsmaycovermovingpartsandshouldbeavoided.

English

1/4 Sheet Palm Sander

Operator’s Manual GPS2303

•Avoidaccidentalstarting.Ensuretheswitchisintheoffpositionbeforepluggingin.

Carryingpowertoolwithyourngerontheswitchorplugginginpowertoolsthathavetheswitch

oninvitesaccidents.

•Removeanyadjustingkeysorwrenchesbeforeturningthepower

tool on. Awrenchorkeythatisleftattachedtoarotatingpartofthetoolmayresultinpersonal

injury.

•Donotoverreach.Maintainproperfootingandbalanceatalltimes.Lossofbalancecan

causeaninjuryinanunexpectedsituation.

•Ifdevicesareprovidedforconnectionofdustextractionand

collection facilities, ensure these are connected and properly used.

Useofthesedevicescanreducedustrelatedhazards.

•Donotusealadderorunstablesupport.Stablefootingonasolidsurfaceenables

bettercontrolofthetoolinunexpectedsituations.

•Keeptoolhandlesdry,cleanandfreefromoilandgrease.Slipperyhandles

cannotsafelycontrolthetool.

TOOL USE AND CARE

• Secure the work piece. Useclamporotherpracticalwaytoholdtheworkpiecetoa

stableplatform.Holdingtheworkpiecebyhandoragainstyourbodyisunstableandmayleadto

lossofcontrol.

•Donotforcethepowertool.Thetoolwillperformthejobbetterandsaferatthefeed

rateforwhichitisdesigned.Forcingthetoolcouldpossiblydamagethetoolandmayresultin

personalinjury.

•Usethecorrectpowertoolforthejob.Don’tforcethetoolorattachmenttodoa

jobforwhichitisnotdesigned.

•Donotusetoolifswitchdoesnotturnitonoroff.Anytoolthatcannotbe

controlledwiththeswitchisdangerousandmustberepairedorreplacedbyanauthorizedservice

center.

•Turnpowertooloff,anddisconnecttheplugfromthepowersourceand/or

batterypackfromthepowertoolbeforemakinganyadjustments,changingtheaccessories,or

storingthetools. Suchpreventivesafetymeasuresreducetheriskofanaccidentalstartupwhich

maycausepersonalinjury.

•Storeidletooloutofreachofchildrenandotherinexperienced

persons. Itisdangerousinthehandofuntrainedusers.

•Maintainpowertoolswithcare.Checkforproperalignmentandbindingofmoving

parts,componentbreaks,andanyotherconditionsthatmayaffectthetool’soperation.Aguard

oranyotherpartthatisdamagedmustbeproperlyrepairedorreplacedbyanauthorizedservice

centertoavoidriskofpersonalinjury.

•Userecommendedaccessories.Usingaccessoriesandattachmentsnot

recommendedbythemanufacturerorintendedforuseonthistypetoolmaycausedamageto

thetoolorresultinpersonalinjurytotheuser.Consulttheoperator’smanualforrecommended

accessories.

English

•Keepcuttingtoolssharpandclean.Properlymaintainedcuttingtoolswithsharp

cuttingedgesarelesslikelytobindandareeasiertocontrol.

•Feedtheworkpieceinthecorrectdirectionandspeed.Feedthework

pieceintoablade,cutter,orabrasivesurfaceagainstthedirectionofthecuttingtool’sdirection

ofrotationonly.Incorrectlyfeedingtheworkpieceinthesamedirectionmaycausethework

piecetobethrownoutathighspeed.

•Neverleavethetoolrunningunattended,turnthepoweroff.Donot

leavethetooluntilitcomestoacompletestop.

•Neverstartthepowertoolwhenanyrotatingcomponentisin

contact with the work piece.

 WARNING: USE OF THIS TOOL CAN GENERATE AND DISBURSE DUST

OR OTHER AIRBORNE PARTICLES, INCLUDING WOOD DUST, CRYSTALLINE

SILICA DUST AND ASBESTOS. Direct particles away from face and body.

Always operate tool in a well-ventilated area and provide for proper dust

removal. Use dust collection system wherever possible. Exposure to the dust

may cause serious and permanent respiratory or other injury, including silicosis

(a serious lung disease), cancer, and death. Avoid breathing the dust, and avoid

prolonged contact with the dust. Allowing dust to get into your mouth or eyes,

or lay on your skin may promote absorption of harmful material. Always use

properly ﬁtting NIOSH/OSHA approved respiratory protection appropriate for

dust exposure, and wash exposed areas with soap and water.

SERVICE

• Have your power tool Serviced by a qualiﬁed repair person using

only identical replacement parts. Thiswillensurethatthesafetyofthepowertool

ismaintained.

•Serviceyourpowertoolperiodically.Whencleaningatool,becarefulnotto

disassembleanyportionofthetoolsinceinternalwiresmaybemisplacedorpinched.

WARNING:READ AND UNDERSTAND ALL WARNINGS, CAUTIONS

AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure

to follow all instructions listed below may result in electric shock, ﬁre and/or

serious personal injury.

SAVE THESE INSTRUCTIONS

EXTENSION CORDS

Grounded tools require a three wire extension cord.Doubleinsulatedtoolscan

useeitheratwoorthreewireextensioncord.Asthedistancefromthepowersupplyoutletincreases,

youmustuseaheaviergaugeextensioncord.Usingextensioncordswithinadequatelysizedwire

causesaseriousdropinvoltage,resultinginlossofpowerandpossibletooldamage.Refertothe

tableshownbelowtodeterminetherequiredminimumwiresize.

Thesmallerthegaugenumberofthewire,thegreaterthecapacityofthecord.Forexample:a

14-gaugecordcancarryahighercurrentthana16-gaugecord.Whenusingmorethanoneextension

cordtomakeupthetotallength,besureeachcordcontainsatleasttheminimumwiresizerequired.

Ifyouareusingoneextensioncordformorethanonetool,addthenameplateamperesandusethe

sumtodeterminetherequiredminimumwiresize.

English

1/4 Sheet Palm Sander

Operator’s Manual GPS2303

Guidelines for Using Extension Cords

• Ifyouareusinganextensioncordoutdoors,besureitismarkedwiththesufx“W-A”(“W”in

Canada)toindicatethatitisacceptableforoutdooruse.

• Besureyourextensioncordisproperlywiredandingoodelectricalcondition.Alwaysreplacea

damagedextensioncordorhaveitrepairedbyaqualiedpersonbeforeusingit.

• Protectyourextensioncordsfromsharpobjects,excessiveheat,anddamporwetareas.

SPECIFIC SAFETY RULES FOR PALM SANDERS

 WARNING: DO NOT LET COMFORT OR FAMILIARITY WITH PRODUCT

(GAINED FROM REPEATED USE) REPLACE STRICT ADHERENCE TO

PRODUCT SAFETY RULES. If you use this tool unsafely or incorrectly, you can

suffer serious personal injury!

•Alwaysholdthetoolrmlyinyourhandsbeforeswitchingthetool

“ON”. Thereactiontothetorqueofthemotorasitacceleratestofullspeedmaycausethetool

totwist.

•Donotleavethetoolrunning.



Operatethetoolonlywhenhand-held.

•Thistoolhasnotbeenwaterproofed,sodonotusewaterontheworkpiece

surfaces.

•Ventilateyourworkareaadequatelywhenyouperformsandingoperations.

•Weareyeandhearingprotection.Alwaysusesafetyglasseswithsideshields.

Unlessotherwisespecied,everydayglassesprovideonlylimitedimpactresistance,theyarenot

safetyglasses.Useonlycertiedsafetyequipment;eyeprotectionequipmentshouldcomplywith

ANSIz87.1standards.ProtectivehearingequipmentshouldcomplywithANSIs3.19standards.

•Protectyourlungs. Wearafaceordustmaskiftheoperationisdusty.Followingthisrule

willreducetheriskofpersonalinjury.

SAFETY RULES FOR PAINT REMOVAL

WARNING: Extreme care should be taken when removing paint. The

peelings, residue, and vapors of paint may contain lead, which is poisonous.

Exposure to even low levels of lead can cause irreversible brain and nervous

system damage. Young and unborn children are particularly vulnerable.

Beforebeginninganypaintremovalprocessyoushoulddeterminewhetherthepaintyouareremoving

containslead.Thiscanbedonebyyourlocalhealthdepartmentorbyaprofessionalwhousesapaint

analyzertocheckforlead.

Recommended Minimum Wire Gauge for Extension Cords (120 Volt)

Nameplate

Amperes

(At Full Load)

Extension Cord Length

25 Feet 50 Feet 75 Feet 100 Feet 150 Feet 200 Feet

0–2.0 18 18 18 18 16 16

2.1–3.4 18 18 18 16 14 14

3.5–5.0 18 18 16 14 12 12

5.1–7.0 18 16 14 12 12 10

7.1–12.0 18 14 12 10 8 8

12.1–16.0 14 12 10 10 8 6

16.1–20.0 12 10 8 8 6 6

English

WARNING: Lead-based paint should only be removed by a professional.

Persons removing paint should follow these guidelines

•Keeptheworkareawellventilated.Openthewindowsandputanexhaustfaninone

ofthem.Besurethefanismovingairfrominsidetooutside.

•Removeorcoveranycarpets,rugs,furniture,clothing,cooking

utensils, and air ducts.

•Placedropclothsintheworkareatocatchanypaintchipsor

peelings. Wearprotectiveclothingsuchasextraworkshirts,overallsandhats.

•Workinoneroomatatime.Furnishingsshouldberemovedorplacedinthecenter

oftheroomandcovered.Workareasshouldbesealedofffromtherestofthedwellingbysealing

doorwayswithdropcloths.

•Children,pregnantorpotentiallypregnantwomenandnursing

mothers should not be present in the work area untiltheworkisdoneandall

cleanupiscomplete.

•Keepfoodanddrinkoutoftheworkarea.Washhands,arms,andfaceandrinse

mouthbeforeeatinganddrinking.Donotsmokeorchewgumortobaccointheworkarea.

•Cleanupallremovedpaintanddustbywetmoppingtheoors.Use

awetclothtocleanallwalls,sillsandanyothersurfaceswherepaintordustisclinging.Donot

sweep,drydustorvacuum.Useahighphosphatedetergentortrisodium(TSP)towashandmop

areas.

•Attheendofeachworksession,putthepaintchipsanddebrisinadoubleplastic

bag,closeitwithtapeortwisttiesanddisposeproperly.

•Removeprotectiveclothingandworkshoesintheworkareatoavoid

carrying dust into the rest of the dwelling. Washworkclothesseparately.Wipe

shoesoffwithawetrag,andthenwashthatragwiththeworkclothes.Washhairandbody

thoroughlywithsoapandwater.

 WARNING: USE OF THIS TOOL CAN GENERATE AND DISBURSE DUST

OR OTHER AIRBORNE PARTICLES, INCLUDING WOOD DUST, CRYSTALLINE

SILICA DUST AND ASBESTOS. Direct particles away from face and body.

Always operate tool in a well-ventilated area and provide for proper dust removal.

Use dust collection system wherever possible. Exposure to the dust may cause

serious and permanent respiratory or other injury, including silicosis (a serious

lung disease), cancer, and death. Avoid breathing the dust, and avoid prolonged

contact with the dust. Allowing dust to get into your mouth or eyes, or lay on

your skin may promote absorption of harmful material. Always use properly

ﬁtting NIOSH/OSHA approved respiratory protection appropriate for dust

exposure, and wash exposed areas with soap and water.

SAVE THESE INSTRUCTIONS

English

1/4 Sheet Palm Sander

Operator’s Manual GPS2303

YOUR PALM SANDER

1.ON/OFFSwitch

2.PalmGrip

3.DustBag

4.PaperClamps

5.SandingPad

UNPACKING AND CONTENT

IMPORTANT:Due to modern mass production techniques, it is

unlikely the tool is faulty or that a part is missing. If you ﬁnd anything

wrong, do not operate the tool until the parts have been replaced or the

fault has been rectiﬁed. Failure to do so could result in serious personal

injury.

Contents in Package:

Description QTY Description QTY

Sander   1  PaperPunchPlate  1

DustBag  1  Sandpaper  3

Operator’sManual 1

FIG 1

English

OPERATION

WARNING: Always check that the power supply corresponds to the

voltage on the rating name plate.

WARNING: Always be sure that the tool is switched off and unplugged

before adjusting, adding accessories, or checking a function on the tool.

Switch Action

WARNING: Before plugging in the tool, always check to see that the tool

is switched off.

Theswitchcanbelockedin"ON"positionforeaseofoperatorcomfortduringextendeduse.Apply

cautionwhenlockingtoolin"ON"positionandmaintainarmgrasponthetool.Yoursanderis

equippedwithaclear,exibleplasticbootthatcoversthe"ON/OFF"switch;thisisreferredtoasa

"dust-protectedswitch".Itisnotuncommonforsanderstocollectlargeamountsofairbornesawdust

intheswitcharea,which,ifnotclearedout,maycausetheswitchtobecomenon-functional.The

dustprotectedswitch,ontheotherhand,cannotaccumulatedustintheswitcharea.

To start the sander, pressdownthe"I"(ON)sideoftheswitch.

To stop the sander, pressdownthe"O"(OFF)sideoftheswitch.

Installing and Removing Abrasive Paper:

WARNING: Always be sure that the tool is switched off and unplugged

before performing any work on the tool.

Yoursanderisdesignedtouse1/4sizedsandingsheets,measuring41/2"X51/2"insize.Youcan

purchaseabrasivepaperpre-cuttothe1/4sheetsizeoryoucanmakeyourown.Cutastandard,full

sizedsheet(9"X11")ofabrasivepaperinto4equalsizedpieces,41/2"x51/2".Cuta1/2sheetof

abrasivepaperintotwo41/2"x51/2"pieces.

Onceyouhavepreparedanadequatesupplyof1/4sheetsizedabrasivepaperinvariousgritsizesand

you’veensuredthetoolisunpluggedfromthepowersource,youinstallthepaperonthesanderas

follows:

Openthefrontpaperclampbyreleasingtheclamplever(leftside)andinsertingthe41/2"edgeofthe

abrasivepaperunderpaperclampuntilithitsthebuilt-instop.Centerthepaperandaligntheedges

paralleltothepad,thenre-securetheclamplevertosecurethepaper.

Removethedustcollectionbagandstretchthepapertightlyacrossthesandingpad.Releasetherear

paperclamplever;inserttheremainingpaperedgeundertheclamp;keepingthepapertightagainst

thesandingpad,thenre-securetherearpaperclamp.

Reinstallthedustcollectionbag.(HINT:Insertingtheabrasivepaperendsundertheclampscan

bemadeeasierbypre-bendingorsofteningtheseedgesrst.Tosoftentheedges,repeatedlypull

themovera90°tableorsimilaredgeuntiltheybecomepliableandeasytofold.Thepre-bendingor

softeningtechniqueisespeciallyusefulwiththelargergritsandtheirstifferabrasivepapers,36to

80Grit.)

Paper Punch Plate

Yoursanderisequippedwithaspecialsandingpadanddualpurposefan,givingitdustcollection

capability.Byhavingdustcollectioncapability,youareabletominimizetheamountofambientdustin

theairaroundyou,substantiallyreducemessydustontheworkpiece&workarea,andincreasethe

surfacenishqualityproducedbythesander.

English

1/4 Sheet Palm Sander

Operator’s Manual GPS2303

Withoutabrasivepaperinstalled,lookingatthebottomofyoursander’ssandingpad,you’llnotice

threeholesonboththerightandleftsides.Theseholesareusedtotransportsandingdustfromthe

workpiecesurfacetothedustcollectionbag.Fortheseholestocollectdust,youmusthavematching

holesintheabrasivepaperforthedusttoowthrough.Punchingaccurateholesintotheabrasiveis

quickandeasy,usingtheincludedpaperpunchplateandthefollowingprocess:

Withthesanderunpluggedfromthepowersourceandabrasivepaperinstalled,turnthesanderupside

downsothesandingpadisfacingupwards.Placethepaperpunchplateovertheabrasivepaperso

thebentsidesofthepunchplateareushwiththepaper’sedges.Pressthepunchplatedownwardto

punchholesthroughtheabrasivepaper;thecoarsergritpaperswillrequiremorepressurebecause

theirpaperbackingisthickerandmorestiff.

WARNING: Be sure to remove the punch plate before operating the

tool.

Dust Collect Bag

WARNING: Never operate this tool without the dust collection bag

installed when using perforated abrasive paper.

Thedustcollectionbagislocatedintherearofyoursander.Asmentionedintheprevioussection,

sandingdustisdrawnupintotheholespunchedintheabrasivepaper,thenthroughthematching

holesinthesandingpadandintothedustbagwhereit’scollectedduringsandingoperations.Asthe

dustcollectionbagllsbeyondhalffullthedustcollectionsystembecomeslessefcient.Therefore,for

moreefcientperformance,emptythedustbagwhenitbecomeshalffull.

To Empty the Dust Collection Bag

•Unplugthesanderfromthepowersource.

•Removethedustbagfromitsrearmountbygrippingthesanderwithonehandandthedustbag

withyourotherhand.Thenpullthedustbagstraightback.

•Toemptythebagyousimplyturnitonendwithroundmountingtubeatthefrontofthebagpointing

downwardandshakethecontentfromthebagintoacontainer.

To Reinstall the Dust Collection Bag:

•Unplugthesanderfromthepowersource.

•Insertthemountingtubeintothedustexhaustportattherearofthesanderuntilitisrmlysetin

place.

Sanding Operation

Yoursandersmoothstheworkpiecesurfacebythepadmovingintinycirclesathighspeed.Thistype

ofsandingactioncalled"orbitalmotion",givingyoursanderaveryfastcuttingactionforquickremoval

oflargeamountsofstock,especiallywiththecoarsergritabrasivepapers.Onmostsandingjobs,

orbitalmotiongivesyoutheabilitytosandinanydirectionirrespectiveofthewood’sgrain.However,to

attainabetternish,itisbesttosand"with"thegrain.

To Use the Sander

•Clamporotherwisesecuretheworkpiecetopreventitfrommovingwhileyou’resanding.

•Holdthetoolinfrontandawayfromyouandclearoftheworkpiece.Startthesanderby pressingthe

switchtothe"I"(ON)positionandletitcomeuptofullspeed.

English

•Slowlyloweryoursanderontotheworkpiece,thenmovethesanderinslowforward&backward

strokes.Donotforceorpushthetooldownontheworkpiece(theweightofthetoolissufcient

pressure).Thisallowsthemotorandabrasivepapertooperateattheirmostefcientspeed.

Excessivepressurecausesthemotortoslowdown,preventingtheabrasivefromcuttingeffectively

andcausingtheabrasivetoprematurelywearout.Whenthemotorisslowedbyexcessive

pressure,themotorwillquicklyoverheatandpossiblycausemotordamageinadditionto

producinganinferiorworkpiecesurface.

•Donotsandinonespottoolong;thesandercaneasilyremovetoomuchmaterial,producingan

unevensurface.Uselongsweepingstrokeswhilesanding,graduallymovingtoprogressivelyner

gritabrasivepaperuntilthedesiredsurfacenishisachieved.

•.Yoursander’slightweightandcomfortablepalmgripmakeitidealfordoingworkoverheadandon

verticalsurfaces.

•With3-sidedushsandingcapabilityyou’reabletosandincorners,cabinetinteriors,boxinteriors,

etc.Whenyouarereadytochangepaperorarenishedwithajob,liftthesanderawayfrom

theworksurface,presstheswitchintothe"O"(OFF)position,thenunplugthesandertoprevent

inadvertentlystartingpriortotoolstorage.

MAINTENANCE

CLEANING

Avoidusingsolventswhencleaningplasticparts.Mostplasticsaresusceptibletodamagefrom

varioustypesofcommercialsolventsandmaybedamagedbytheiruse.Usecleanclothstoremove

dirt,dust,oil,grease,etc.

WARNING: Donotatanytimeletbrakeuids,gasoline,petroleum-

based products, penetrating oils, etc., come in contact with plastic parts.

Chemicals can damage, weaken or destroy plastic which may result in serious

personal injury.

Electrictoolsusedonberglassmaterial,wallboard,spacklingcompounds,orplasteraresubject

toacceleratedwearandpossibleprematurefailurebecausetheberglasschipsandgrindingsare

highlyabrasivetobearings,brushes,commutators,etc.Consequently,wedonotrecommendedusing

thistoolforextendedworkonthesetypesofmaterials.However,ifyoudoworkwithanyofthese

materials,itisextremelyimportanttocleanthetoolusingcompressedair.

LUBRICATION

Thistoolispermanentlylubricatedatthefactoryandrequiresnoadditionallubrication.

English

1/4 Sheet Palm Sander

Operator’s Manual GPS2303

TWO-YEAR WARRANTY

Thisproductiswarrantedfreefromdefectsinmaterialandworkmanshipfor2yearsafterdateof

purchase.Thislimitedwarrantydoesnotcovernormalwearandtearordamagefromneglector

accident.Theoriginalpurchaseriscoveredbythiswarrantyanditisnottransferable.Priortoreturning

yourtooltostorelocationofpurchase,pleasecallourToll-FreeHelpLineforpossiblesolutions.

THIS PRODUCT IS NOT WARRANTED IF USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.

ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR WARRANTY.

TOLL-FREE HELP LINE

ForquestionsaboutthisoranyotherGENESISProduct,pleasecallToll-Free:888-552-8665.

Orvisitourwebsite:www.richpowerinc.com

RichpowerIndustries,Inc.

736HamptonRoad

Williamston,SC29697

PrintedinChina,onrecycledpaper

Richpower Industries, Inc.

736 Hampton Road

Williamston, SC USA

Genesis GPS2303 User manual

Related papers

Other documents