English
Corner Palm Saner
Operator’s Manual GPS080
OPERATION
WARNING: Always check that the power supply corresponds to the
voltage on the rating name plate.
WARNING: Always be sure that the tool is switched off and unplugged
before adjusting, adding accessories, or checking a function on the tool.
ATTACHING SANDPAPER, SCRUBBING PAD (NOT INCLUDED) AND
POLISHING PAD (NOT INCLUDED)
NOTE: Sandpaper can be reused for the life of the sanding abrasive. It is
recommended that you keep the sandpaper backing pad clean to provide for
the best adhesion. Clean occasionally by brushing backing pad lightly with a
small brush.
To remove sandpaper and pads,
SWITCH ACTION
CAUTION: Before plugging in the tool, always check to see that the tool is
switched off.
To start the sander,
To stop the sander, .
OPERATING
Do not force the tool
Extensive periods of sanding may tend to overheat the motor.