2. Computers & electronics
  3. Audio & home theatre
  4. DVD players
  5. Hitachi
  6. DVP425E

Hitachi DVP425E, DVP425UK User manual

  • Hello! I am an AI chatbot trained to assist you with the Hitachi DVP425E User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
GB
Instruction Manual
DVP425UK
DVP425E
1080P HDMI DVD Player
2
1
Extra Information
Advanced Playback
Basic Playback
Basic DVD features
The apparatus shall not be exposed to
dripping or splashing and that no objects
lled with liquids, such as vases, shall be
placed on apparatus.
‘CONSUMER SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS. IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION ‘ OUTPUT.
CAUTION
Use of controls or adjustments
or performance of procedures
other than herein may result in
hazardous radiation exposure or
other unsafe operation.
Manufactured under license from
Dolby Laboratories. “Dolby”,
and the double-D symbol are
tradsmarks of Dolby Laboratories.
MACROVISION
This product incorporates copyright
protection technology that is
protected by U.S. patents and other
intellectual property rights. Use of
this copyright protection technology
must be authorized by Macrovision,
and is intended for home and other
limited viewing uses only unless
otherwise authorized by Macrovision.
Reverse engineering or disassembly
is prohibited.
HDMI, the HDMI logo and High-
Denition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC."
2
Both the DVD player and the discs
are coded by region. These regional
codes must match in order for the
disc to play. If the codes do not
match, the disc will not play.
The Region Number for this player
is described on the rear panel of
the player.
2
Extra InformationAdvanced PlaybackBasic PlaybackBasic DVD features
Important safety instructions
SOME DOS AND DON'TS ON THE SAFE USE OF EQUIPMENT
dŚŝƐĞƋƵŝƉŵĞŶƚŚĂƐďĞĞŶĚĞƐŝŐŶĞĚĂŶĚŵĂŶƵĨĂĐƚƵƌĞĚƚŽŵĞĞƚŝŶƚĞƌŶĂƟŽŶĂůƐĂĨĞƚLJ
ƐƚĂŶĚĂƌĚƐďƵƚ͕ůŝŬĞĂŶLJĞůĞĐƚƌŝĐĂůĞƋƵŝƉŵĞŶƚ͕ĐĂƌĞŵƵƐƚďĞƚĂŬĞŶŝĨLJŽƵĂƌĞƚŽŽďƚĂŝŶƚŚĞ
ďĞƐƚƌĞƐƵůƚƐĂŶĚƐĂĨĞƚLJŝƐƚŽďĞĂƐƐƵƌĞĚ͘
DOƌĞĂĚƚŚĞŽƉĞƌĂƟŶŐŝŶƐƚƌƵĐƟŽŶƐďĞĨŽƌĞLJŽƵĂƩĞŵƉƚƚŽƵƐĞƚŚĞĞƋƵŝƉŵĞŶƚ͘
DOĞŶƐƵƌĞƚŚĂƚĂůůĞůĞĐƚƌŝĐĂůĐŽŶŶĞĐƟŽŶƐ;ŝŶĐůƵĚŝŶŐƚŚĞŵĂŝŶƐƉůƵŐ͕ĞdžƚĞŶƐŝŽŶůĞĂĚƐĂŶĚ
ŝŶƚĞƌͲĐŽŶŶĞĐƟŽŶƐďĞƚǁĞĞŶƚŚĞƉŝĞĐĞƐŽĨĞƋƵŝƉŵĞŶƚͿĂƌĞƉƌŽƉĞƌůLJŵĂĚĞĂŶĚŝŶĂĐĐŽƌĚĂŶĐĞ
ǁŝƚŚƚŚĞŵĂŶƵĨĂĐƚƵƌĞƌΖƐŝŶƐƚƌƵĐƟŽŶƐ͘^ǁŝƚĐŚŽīĂŶĚǁŝƚŚĚƌĂǁƚŚĞŵĂŝŶƐƉůƵŐďĞĨŽƌĞ
ŵĂŬŝŶŐŽƌĐŚĂŶŐŝŶŐĐŽŶŶĞĐƟŽŶƐ͘
DOĐŽŶƐƵůƚLJŽƵƌĚĞĂůĞƌŝĨLJŽƵĂƌĞĞǀĞƌŝŶĚŽƵďƚĂďŽƵƚƚŚĞŝŶƐƚĂůůĂƟŽŶ͕ŽƉĞƌĂƟŽŶŽƌƐĂĨĞƚLJ
ŽĨLJŽƵƌĞƋƵŝƉŵĞŶƚ͘
DOďĞĐĂƌĞĨƵůǁŝƚŚŐůĂƐƐƉĂŶĞůƐŽƌĚŽŽƌƐŽŶĞƋƵŝƉŵĞŶƚ͘
DOƌŽƵƚĞƚŚĞŵĂŝŶƐůĞĂĚƐŽƚŚĂƚŝƚŝƐŶŽƚůŝŬĞůLJƚŽďĞǁĂůŬĞĚŽŶ͕ĐƌƵƐŚĞĚ͕ĐŚĂĨĞĚ͕Žƌ
ƐƵďũĞĐƚĞĚƚŽĞdžĐĞƐƐŝǀĞǁĞĂƌĂŶĚƚĞĂƌŽƌŚĞĂƚ͘
DOƵŶƉůƵŐƚŚŝƐƉůĂLJĞƌĨƌŽŵƚŚĞǁĂůůŽƵƚůĞƚďĞĨŽƌĞĐůĞĂŶŝŶŐ͘
Laser Product
This product is equipped with low power laser equipment inside. For your safety, don’t take apart any
covers or try to take apart the product inside. Please contact an authorized service person for repairing.
This symbol indicates that there are impor-
tant operating and maintenance instructions
in the literature accompanying this unit.
This symbol indicates that dangerous volt-
age constituting a risk of electric shock is
present within this unit.
Caution:
To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
Power Requirement
Because the power requirement of electrical products is different in various places, before you use
this product, make sure that the power requirement of the product matches your household power.
CAUTION:
TO REDUCE T HE RISK OF ELE CTRIC S HOCK, DO
NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE, REFER SE RVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELEC TRIC SHOCK
DO NOT O PE N
CLASS 1
LASER PRODUCT
Caution:
This product is equipped with low power
laser equipment inside, for your safety,
don’t open the laser radiation protective
equipment. Don’t look at the laser radiation
when the equipment is operating.
3
Extra Information
Advanced Playback
Basic Playback
Basic DVD features
Important safety instructions
DON'TĞdžƉŽƐĞƚŚĞďĂƩĞƌŝĞƐ;ďĂƩĞƌLJƉĂĐŬŽƌďĂƩĞƌŝĞƐŝŶƐƚĂůůĞĚͿƚŽĞdžĐĞƐƐŝǀĞŚĞĂƚƐƵĐŚĂƐ
ƐƵŶƐŚŝŶĞ͕ĮƌĞŽƌƚŚĞůŝŬĞ͘
DON'TƌĞŵŽǀĞĂŶLJĮdžĞĚĐŽǀĞƌĂƐƚŚŝƐŵĂLJĞdžƉŽƐĞĚĂŶŐĞƌŽƵƐǀŽůƚĂŐĞƐ͘
DON'TŽďƐƚƌƵĐƚƚŚĞǀĞŶƟůĂƟŽŶŽƉĞŶŝŶŐƐŽĨƚŚĞĞƋƵŝƉŵĞŶƚǁŝƚŚŝƚĞŵƐƐƵĐŚĂƐŶĞǁƐƉĂƉĞƌƐ͕
ƚĂďůĞĐůŽƚŚƐ͕ĐƵƌƚĂŝŶƐ͕ĞƚĐ͘KǀĞƌŚĞĂƟŶŐǁŝůůĐĂƵƐĞĚĂŵĂŐĞĂŶĚƐŚŽƌƚĞŶƚŚĞůŝĨĞŽĨƚŚĞ
ĞƋƵŝƉŵĞŶƚ͘
DON'TĂůůŽǁĞůĞĐƚƌŝĐĂůĞƋƵŝƉŵĞŶƚƚŽďĞĞdžƉŽƐĞĚƚŽĚƌŝƉƉŝŶŐŽƌƐƉůĂƐŚŝŶŐ͕ŽƌŽďũĞĐƚƐĮůůĞĚ
ǁŝƚŚůŝƋƵŝĚƐ͕ƐƵĐŚĂƐǀĂƐĞƐ͕ƚŽďĞƉůĂĐĞĚŽŶƚŚĞĞƋƵŝƉŵĞŶƚ͘
DON'TƉůĂĐĞŚŽƚŽďũĞĐƚƐŽƌŶĂŬĞĚŇĂŵĞƐŽƵƌĐĞƐƐƵĐŚĂƐůŝŐŚƚĞĚĐĂŶĚůĞƐŽƌŶŝŐŚƚůŝŐŚƚƐŽŶ͕
ŽƌĐůŽƐĞƚŽĞƋƵŝƉŵĞŶƚ͘,ŝŐŚƚĞŵƉĞƌĂƚƵƌĞƐĐĂŶŵĞůƚƉůĂƐƟĐĂŶĚůĞĂĚƚŽĮƌĞƐ͘
DON'TůĞĂǀĞĞƋƵŝƉŵĞŶƚƐǁŝƚĐŚĞĚŽŶǁŚĞŶŝƚŝƐƵŶĂƩĞŶĚĞĚƵŶůĞƐƐŝƚŝƐƐƉĞĐŝĮĐĂůůLJƐƚĂƚĞĚ
ƚŚĂƚŝƚŝƐĚĞƐŝŐŶĞĚĨŽƌƵŶĂƩĞŶĚĞĚŽƉĞƌĂƟŽŶŽƌŚĂƐĂƐƚĂŶĚͲďLJŵŽĚĞ͘^ǁŝƚĐŚŽīƵƐŝŶŐƚŚĞ
ƐǁŝƚĐŚŽŶƚŚĞĞƋƵŝƉŵĞŶƚŽƌĂƚƚŚĞŵĂŝŶƐƐŽĐŬĞƚĂŶĚŵĂŬĞƐƵƌĞƚŚĂƚLJŽƵƌĨĂŵŝůLJŬŶŽǁŚŽǁ
ƚŽĚŽƚŚŝƐ͘^ƉĞĐŝĂůĂƌƌĂŶŐĞŵĞŶƚƐŵĂLJŶĞĞĚƚŽďĞŵĂĚĞĨŽƌŝŶĮƌŵŽƌŚĂŶĚŝĐĂƉƉĞĚƉĞŽƉůĞ͘
DON'TĐŽŶƟŶƵĞƚŽŽƉĞƌĂƚĞƚŚĞĞƋƵŝƉŵĞŶƚŝĨLJŽƵĂƌĞŝŶĂŶLJĚŽƵďƚĂďŽƵƚŝƚǁŽƌŬŝŶŐ
ŶŽƌŵĂůůLJ͕ŽƌŝĨŝƚŝƐĚĂŵĂŐĞĚŝŶĂŶLJǁĂLJͲƐǁŝƚĐŚŽī͕ǁŝƚŚĚƌĂǁƚŚĞŵĂŝŶƐƉůƵŐĂŶĚĐŽŶƐƵůƚ
LJŽƵƌĚĞĂůĞƌ͘tŚĞƌĞƚŚĞD/E^ƉůƵŐŝƐƵƐĞĚĂƐƚŚĞĚŝƐĐŽŶŶĞĐƚĚĞǀŝĐĞ͕ƚŚĞĚŝƐĐŽŶŶĞĐƚĚĞǀŝĐĞ
ƐŚĂůůƌĞŵĂŝŶƌĞĂĚŝůLJŽƉĞƌĂƚĂďůĞ͘
DON'T ƵƐĞĂĐĐĞƐƐŽƌŝĞƐŶŽƚƌĞĐŽŵŵĞŶĚĞĚŝŶƚŚŝƐŝŶƐƚƌƵĐƟŽŶŵĂŶƵĂůĂƐƚŚĞLJŵĂLJďĞ
ŚĂnjĂƌĚŽƵƐ͘
DON'TƉůĂĐĞŽŶĂŶƵŶƐƚĂďůĞƚƌŽůůĞLJ͕ƐƚĂŶĚ͕ƚƌŝƉŽĚ͕ďƌĂĐŬĞƚŽƌƚĂďůĞ͘dŚĞƉůĂLJĞƌŵĂLJĨĂůů͕
ĐĂƵƐŝŶŐƐĞƌŝŽƵƐŝŶũƵƌLJƚŽĂĐŚŝůĚŽƌĂĚƵůƚ͕ĂŶĚƐĞƌŝŽƵƐĚĂŵĂŐĞƚŽƚŚĞƉůĂLJĞƌ͘ƉůĂLJĞƌͲĂŶĚͲ
ƚƌŽůůĞLJĐŽŵďŝŶĂƟŽŶƐŚŽƵůĚďĞŵŽǀĞĚǁŝƚŚĐĂƌĞ͘YƵŝĐŬƐƚŽƉƐ͕ĞdžĐĞƐƐŝǀĞĨŽƌĐĞ͕ĂŶĚƵŶĞǀĞŶ
ƐƵƌĨĂĐĞƐŵĂLJĐĂƵƐĞƚŚĞƉůĂLJĞƌͲĂŶĚͲƚƌŽůůĞLJĐŽŵďŝŶĂƟŽŶƚŽŽǀĞƌƚƵƌŶ͘
DON'TŶŽƚŽǀĞƌůŽĂĚǁĂůůŽƵƚůĞƚƐĂŶĚĞdžƚĞŶƐŝŽŶĐŽƌĚƐĂƐƚŚŝƐĐĂŶƌĞƐƵůƚŝŶƌŝƐŬŽĨĮƌĞŽƌ
ĞůĞĐƚƌŝĐƐŚŽĐŬ͘
DON'TĂƩĞŵƉƚƚŽƐĞƌǀŝĐĞƚŚŝƐƉůĂLJĞƌLJŽƵƌƐĞůĨĂƐŽƉĞŶŝŶŐŽƌƌĞŵŽǀŝŶŐĐŽǀĞƌƐŵĂLJĞdžƉŽƐĞ
LJŽƵƚŽĚĂŶŐĞƌŽƵƐǀŽůƚĂŐĞƉŽŝŶƚƐŽƌŽƚŚĞƌŚĂnjĂƌĚƐ͘ZĞĨĞƌĂůůƐĞƌǀŝĐŝŶŐƚŽƋƵĂůŝĮĞĚƐĞƌǀŝĐĞ
ƉĞƌƐŽŶŶĞů͘tŚĞŶƌĞƉůĂĐĞŵĞŶƚƉĂƌƚƐĂƌĞƌĞƋƵŝƌĞĚ͕ďĞƐƵƌĞƚŚĞƐĞƌǀŝĐĞƚĞĐŚŶŝĐŝĂŶŚĂƐƵƐĞĚ
ƌĞƉůĂĐĞŵĞŶƚƉĂƌƚƐƚŚĂƚĂƌĞƐƉĞĐŝĮĞĚŽƌƚŚĂƚŚĂǀĞƚŚĞƐĂŵĞĐŚĂƌĂĐƚĞƌŝƐƟĐƐĂƐƚŚĞ
ŽƌŝŐŝŶĂůƉĂƌƚ͘hŶĂƵƚŚŽƌŝƐĞĚƐƵďƐƟƚƵƟŽŶƐŵĂLJƌĞƐƵůƚŝŶĮƌĞ͕ĞůĞĐƚƌŝĐƐŚŽĐŬŽƌŽƚŚĞƌŚĂnjĂƌĚƐ͘
hƉŽŶĐŽŵƉůĞƟŽŶŽĨĂŶLJƐĞƌǀŝĐĞŽƌƌĞƉĂŝƌƐƚŽƚŚŝƐƉůĂLJĞƌ͕ĂƐŬƚŚĞƐĞƌǀŝĐĞƚĞĐŚŶŝĐŝĂŶƚŽ
ƉĞƌĨŽƌŵƐĂĨĞƚLJĐŚĞĐŬƐƚŽĚĞƚĞƌŵŝŶĞƚŚĂƚƚŚĞƉůĂLJĞƌŝƐŝŶƐĂĨĞŽƉĞƌĂƟŶŐŽƌĚĞƌ͘
ABOVE ALL
ͲͲͲEsZůĞƚĂŶLJŽŶĞĞƐƉĞĐŝĂůůLJĐŚŝůĚƌĞŶƉƵƐŚĂŶLJƚŚŝŶŐŝŶƚŽŚŽůĞƐ͕ƐůŽƚƐŽƌĂŶLJŽƚŚĞƌ
ŽƉĞŶŝŶŐŝŶƚŚĞĐĂƐĞͲƚŚŝƐĐŽƵůĚƌĞƐƵůƚŝŶĂĨĂƚĂůĞůĞĐƚƌŝĐĂůƐŚŽĐŬ͖
ͲͲͲEsZŐƵĞƐƐŽƌƚĂŬĞĐŚĂŶĐĞƐǁŝƚŚĞůĞĐƚƌŝĐĂůĞƋƵŝƉŵĞŶƚŽĨĂŶLJŬŝŶĚ
ͲͲͲŝƚŝƐďĞƩĞƌƚŽďĞƐĂĨĞƚŚĂŶƐŽƌƌLJ͊
4
Extra InformationAdvanced PlaybackBasic PlaybackBasic DVD features
Important safety instructions
Cleaning discs
Some problems occur because the disc
inside the system is dirty (frozen picture,
sound disruptions, picture distortions).
To avoid these problems, discs should be
cleaned on a regular basis.
To clean a disc, use a micro bre cleaning
cloth and wipe the disc from the center to
the edge in a straight line.
CAUTION!
Do not use solvents such as benzene,
thinner, commercially available cleaners, or
anti-static sprays intended for analog discs.
Since the optical unit (laser) of the DVD
system operates at a higher power than
regular DVD or CD players,
cleaning CDs intended for DVD or CD
players may damage the optical unit
(laser). Therefore, refrain from using a
cleaning CD.
UK plug warning
IMPORTANT
The mains lead on this equipment
may be supplied with a moulded plug
incorporating a fuse, the value of which
is indicated on the pin face of the plug.
Should the fuse need to be replaced, an
ASTA or BSI approved BS 1362 fuse must
be used of the same rating. If the fuse
cover is detachable never use the plug
with the cover omitted. If a replacement
fuse cover is required, ensure it is of the
same colour as that visible on the pin face
of the plug. Fuse covers are available from
your dealer.
DO NOT cut off the mains plug from this
equipment. If the plug tted is not suitable
for the power points in your home or the
cable is too short to reach a power point,
then obtain an appropriate safety approved
extension lead or consult your dealer.
Should it be necessary to change the
mains plug, this must be carried out by a
competent person, preferably a qualied
electrician.
If there is no alternative to cutting off
the mains plug, ensure that you dispose
of it immediately, having rst removed
the fuse, to avoid a possible shock hazard
by inadvertent connection to the mains
supply.
IMPORTANT
The wires in this mains lead are coloured
in accordance with the following code:
Blue : NEUTRAL
Brown : LIVE
As these colours may not correspond
to the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire coloured BLUE must be
connected to the terminal marked with
the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be
connected to the terminal marked with
the letter L or coloured BROWN or RED.
On no account connect either of these
wires to the terminal marked E or by the
earth symbol
*
E or coloured green or
green and yellow.
Alternatively, this equipment may
be supplied with a rewireable plug
already tted, which may be removed
if not suitable and an alternative tted
in accordance with the preceding
instructions.
5
Extra Information
Advanced Playback
Basic Playback
Basic DVD features
Introduction
SAFETY PRECAUTIONS 1
Important safety instructions 2-4
Table of Contents 5
Supplied Accessories 6
Setup 6
Connections
Connecting to television 7
Connecting to a Stereo System 7
Connecting to a Digital AV Receiver 8
Connecting to a TV with scart Jack 8
Connecting to a TV with HDMI Jack
9
Connecting the power cord 9
Product Overview
Front and Rear panels 10
Remote Control 11
Getting Started
Inserting Batteries 12
Finding your AV input 12
Setting up Progressive Scan/HDMI feature 12-13
Playable discs 13-14
Playback Feature
Starting disc playback 14
Basic playback control 14
Operations for video playback (DVD/VCD/SVCD) 14
Selecting various repeat functions 14-15
Viewing the disc playback Information 15
Special DVD Features 15
Special VCD and SVCD Features 16
Playing JPEG/Kodak picture CD 16-17
DVD Setup Menu Options
Using the Language setup menu 17-18
Using the Video setup menu 18-19
Using the Audio setup menu 19-20
Using the Rating setup menu 20-21
Using the Misc (Miscellaneous) setup menu 21
Others
Troubleshooting 22
6SHFL¿FDWLRQV 
Glossary 24
Table of Contents
6
Extra InformationAdvanced PlaybackBasic PlaybackBasic DVD features
Introduction
Supplied accessories
Remote Control
and
two AAA batteries
Part Number (Remote Control) 06-RC2100-A0041
Part Number (Batteries) 49-382380-BAT
Setup
Finding a suitable location
Place the player on a at, hard and stable
surface. Do not place the player on a
carpet.
Do not position the player on top of
other equipment that might heat it up (e.g.
reciever or amplier).
Do not put anything under the player (e.g.
CDs, magazines).
Install this system near the AC outlet and
where the AC power plug can be reached
easily.
Space for ventilation
Place the player in a location with
adequate ventilation to prevent internal
heat build up. Allow at least 10 cm (4.5”)
clearance from the rear and the top of
the set and 5 cm (2.3”) from the left and
right to prevent overheating.
MUTE
OK
ANGLE
LANGUAGE
SUBTITLE
ZOOM REPEAT
SEARCH
HDMI
DISPLAY
VOL
SETUP
VOL
MENU
TITLE
STEP
5cm
(2.3")
5cm
(2.3")
10cm
(4.5")
10cm
(4.5")
Composite
video cable
(yellow) and
Audio cables
(white, red)
Part Number (Cable) 41-UH1500-0KK8D
7
Extra Information
Advanced Playback
Basic Playback
Basic DVD features
Connecting to television
IMPORTANT!
You only need to make one video connection
from the following options, depending on the
capabilities of your television.
Connect the DVD player directly to the
television.
Using Composite Video Jack(CVBS)
CVBS
SCART OUT
Pb
Pr
CVBS
A Use the composite video cable (yellow) (supplied) to
connect the DVD player s VIDEO(CVBS) jack to the
video input jack(or the labeled as A/V in,Video In or
Composite) on the TV.
B Use the audio cables(white/red) (supplied) to
connect the AUDIO OUT(L/R)jacks of the DVD
player to corresponding AUDIO IN jacks on the TV.
Using Component Video Jacks(Y, Pb, Pr)
CVBS
SCART OUT
Pb
Pr
IMPORTANT!
The progressive scan video quality is only
possible when using Y, P
b, Pr and a progressive
scan TV is required.
A Use component video cables (red/blue/green) to
connect the DVD player's Y, P
b, Pr jacks to the
corresponding Component video input jacks (or
labeled as Y, P
b, Pr) on the TV.
B Use the audio cables (white/red) (supplied) to
connect AUDIO OUT (L/R) jacks of the DVD player to
the corresponding AUDIO IN jacks on the TV.
C Proceed to page 12 for detailed Progressive Scan set
up.
Connecting to a Stereo System
CVBS
Pb
Pr
Stereo system has Right/Left Audio In
Jacks
A Select one of the video connections (CVBS VIDEO
IN, COMPONENT VIDEO IN) depending on the
options available on your TV.
B Use the audio cables (white/red)(supplied) to
connect AUDIO OUT (L/R) jacks of the DVD player
to the corresponding AUDIO IN jacks on the stereo
system.
Connections
Helpful hint: Before making or changing any connections, make sure that all the devices are
disconnected from the power outlet.
8
Extra InformationAdvanced PlaybackBasic PlaybackBasic DVD features
Connections
Helpful hint: Before making or changing any connections, make sure that all the devices are
disconnected from the power outlet.
Connecting to a Digital AV Receiver
CVBS
Pb
Pr
Receiver has a PCM, Dolby Digital or
MPEG decoder
A Select one of the video connections (CVBS VIDEO
IN, or COMPONENT VIDEO IN) depending on the
options available on your TV.
B Connect the COAXIAL jack of the DVD player to the
corresponding Digital Audio In jack on your Receiver
(cable not supplied).
C Set the DVD player's Digital Output to PCM or ALL
depending on the capabilities of your Receiver (see
page 17 - 18 {Digital Output}).
Tip:
If the audio format of the Digital Output does not
match the capabilities of your receiver, the receiver
will produce a strong, distorted sound or no sound at
all.
Connecting to a TV with scart Jack
A
Using a scart cable (not supplied) to connect the DVD
SCART OUT to corresponding Scart inputsocket on
the TV.
CVBS
CVBS
SCART OUT
Using SCART sockets
9
Extra Information
Advanced Playback
Basic Playback
Basic DVD features
Connecting the power cord
After everything is connected properly, plug in the AC
power plug to the power outlet.
Never make or change any connections with the
power switched on.
“---” will appear on the display window when you
press the _STANDBY button with no disc loaded.
Connections
Optional: Connecting to a TV with HDMI
Jack
IMPORTANT!
If HDMI is connected, Video signal cannot
be outputed through component, Y Pb Pr
connection.
HDMI transfers an uncompressed digital
signal for the clearest sound/image quality.
It has plug and play capability using only
one cable for both audio/video output.
A1 Use a HDMI cable (not supplied) to connect the
HDMI OUT on the DVD Player to HDMI IN on an
HDMI compatible device (e . g . LCD TV, projector,
Plasma).
NOTE:
- It may take a while for the DVD player and input
device to communicate and initialize.
- Playback starts automatically.
Using HDMI (High Denition
Multimedia Interface) sockets
CVBS
SCART OUT
Pb
Pr
HDMI IN
HDMI IN
HDTV
Helpful hint: Before making or changing any connections, make sure that all the devices are
disconnected from the power outlet.
~ AC MAINS
AUDIO
OUT
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
for
UK
plug
for
EU
plug
10
Extra InformationAdvanced PlaybackBasic PlaybackBasic DVD features
A
MAINS
~
Connect to an AC outlet
B
COAXIAL(Digital audio out)
Connect to coaxial Audio input of a digital
audio equipment
C
AUDIO OUT (Left/Right)
&RQQHFWWR$XGLRLQSXWRID79DQDPSOL¿HU
receiver or stereo system
Product Overview
Front and Rear panels
CVBS
SCART OUT
Pb
Pr
ABCDEFG
A
Disc tray
Place a disc here
B
ç
OPEN/CLOSE
Open or close the disc tray
C
Display
Show information about the current status of
the DVD player
D
IR Sensor
Do not block this sensor or the remote control
may not work properly.
E
2
I
STANDBY
Turn the player on or switch it to standby mode
F
STOP
Stop playback
G
#9
PLAY/ PAUSE
Start or pause playback
ABCDEFG
D
HDMI OUT
Connect to HDMI compatible device(example:
LCD/Projector/Plasma/Projection TV, HDTV or
receiver)
E
VIDEO OUT (CVBS)
Connect to CVBS Video input of a TV
F
Y, P
b,
P
r
Component Video OUT
Connect to Y, P
b,
P
r
input of a TV
G
SCART Out
Connect to SCART input of a TV
11
Extra Information
Advanced Playback
Basic Playback
Basic DVD features
Product Overview
Remote Control
I
Turn the player on or switch it to standby
mode
ANGLE
Switch the camera angle during playback
LANGUAGE
Select an audio language (DVD/VCD) or audio
channels
ZOOM
Zoom a picture on the TV screen
SEARCH
Start playback from a designated point
STEP
Step by step playback
DISPLAY
Display the current status or disc information
Cursor buttons for moving left, right, up, down
SETUP
Enter or exit system setup menu
NEXT
Skip to the next title/chapter/ track
PREV
Skip to the previous title/chapter/ track
Numbered buttons (0 - 9)
Select numbered items in a menu
MUTE
Turn on/off sound
OPEN/CLOSE ;
Open / close the disc tray
SUBTITLE
Select a DVD subtitle language
A-B
Repeat playback a specc section on a disc
REPEAT
Select various repeat modes
HDMI
Set HDMI output, switch the resolution to
‘480p’, ‘576p’, ‘720p’(50Hz),‘720p’(60Hz) and
‘1080i’(50Hz), ‘1080i’(60Hz)
VOLUME VOL+/-
Increase / decrease the volume
OK
Conrm an entry or selection
STOP Y
Stop playback
PLAY/PAUSE V
Start or pauses playback
FAST FORWARD .
Do a fast forward search
FAST REVERSE N
Do a fast reverse search
TITLE
Show the title menu
MENU
Switch on or off the playback control mode (for
VCD version 2.0 only)
Enter or exit the disc contents menu
DVP425
A
B
C
D
E
F
G
H
I
J
L
N
M
O
P
Q
R
S
T
U
V
W
X
A
B
C
D
E
F
G
H
I
J
K
K
L
N
M
O
P
Q
R
S
T
U
V
W
X
Y
Y
Z
Z
12
Extra InformationAdvanced PlaybackBasic PlaybackBasic DVD features
Inserting Batteries
A Open the battery compartment.
B Insert two batteries type R03 or AAA, following the
indications (+ / - ) inside the compartment.
C Close the cover.
CAUTION:
1HYHUWKURZEDWWHULHVLQWRD¿UH
Note:
- Be sure to use AAA size batteries.
- Dispose of batteries in a designated disposal area.
- Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
- If the remote control does not operate correctly, or if
the operating range becomes reduced, replace batteries
with new ones.
-Always replace both batteries with new ones. Never
mix battery types or use new and used batteries in
combination.
- Always remove batteries from remote control if they
are dead or if the remote control is not to be used for an
extended period of time. This will prevent battery acid
from leaking into the battery compartment.
Using the Remote Control to Operate
the System
30°
30°
Whin about 6m(19 feet)
A Aim the Remote Control directly at the IR sensor on
the front panel.
B Do not put any objects between the Remote Control
and the IR sensor when operating the DVD player
via remote control.
Finding your AV input
A Press 2I STANDBY on the DVD player to turn it on.
B Turn on the TV and set it to the correct AV input. You
should see the DVD logo screen.
C If you are using external equipment, (such as
audio system or receiver), turn it on and select the
appropriate input source for the DVD player output.
Refer to the equipment user’s manual for detail.
Note: The unit's video output is default to RGB.
Use SCART or the Composite video lead at the
beginning, then change to other output types.
Setting up Progressive Scan/HDMI
feature
(For Progressive Scan TV only)
The progressive scan display is twice the number
of frames per seconds than interlaced scanning
(ordinary normal TV system). With nearly double
the number of lines, progressive scan offers higher
picture resolution and quality.
Before you start...
-Ensure that you have connected this DVD player to
a progressive scan TV using the Y, P
b, Pr connection
(see page 7).
-Ensure that you have completed the basic
installation and set up.
A Turn on your TV and select the video input
connected to the DVD player (refer to your TV user
manual).
B Press 2I on the remote control to turn on the DVD
player.
ÎThe DVD logo screen will appear on the TV.
C Press SETUP.
D Press S/T to select { Video }, then press X.
Aspect Ratio :
View Mode :
4:3
Auto Fit
Aspect Ratio
View Mode
4:3
Auto Fit
Language
Video
Audio
Misc
Rating
RGB
P-Scan
HDMI
Video Out Component
Smart Picture
HD Resolution
E Press S/T to select { Video Out }, then press X.
F Select { P- Scan } or { HDMI }, then press OK to
FRQ¿UP
ÎThe menu will appear on the TV.
Activating Progressive Scan 1. Ensure
your TV supports Progressive Mode
2. If there is a distorted picture on the
TV, wait 15 seconds for automatic
recover
NoYes
Video Out
G Press W to highlight { Yes } and press OKWRFRQ¿UP
Î7KHUHFRQ¿UPDWLRQPHQXZLOODSSHDURQWKH79
Confirm again to use new setting
14
NoYes
Video Out
H Press W to highlight { Yes } and press OKWRFRQ¿UP
Î The setup is now completed and you can start
enjoying the high quality picture.
Getting Started
13
Extra Information
Advanced Playback
Basic Playback
Basic DVD features
To deactivate Progressive Scan
manually:
A Wait for 15 seconds for the auto recovery.
OR
A Press ç on the DVD player to open the disc tray.
B Press number button 1 on the remote control for a
few seconds.
ÎThe DVD logo screen appears.
Tip:
-There are some progressive scan TVs and High-
'H¿QLWLRQ79VWKDWDUHQRWIXOO\FRPSDWLEOHZLWKWKLV
unit, resulting in the unnatural picture when playing
back a DVD VIDEO disc in the progressive scan
mode. In such a case, turn off the progressive scan
feature on both the DVD player and your TV.
Playable discs
Using this DVD player, you can playback on the
following discs. Some of these discs may be
incompatible.
DVD Video disc(Digital Versatile Disc)
DVD
+
R/RW (DVD Recordable / Re-
writable), DVD
+
R DL (Dual layer)
$XGLR9LGHRIRUPDWVRU-3(*¿OHV
CD-R
(CD-Recordable)
Audio/Video format or
-3(*¿OHV
CD-RW
(CD-Rewritable)
Audio/Video format or
-3(*¿OHV
Audio CD
(Compact Disc
Digital Audio)
Video CD
(Formats 1.0, 1.1, 2.0)
Super Video CD
is a trademark of DVD Format/Logo Licensing
Corporation.
Because of problems and errors that can occur
during the creation of DVD and CD software and/or
the manufacture of DVD and CD discs, We cannot
assure that this DVD player will successfully play
every disc bearing the DVD and CD logos. If you
KDSSHQWRH[SHULHQFHDQ\GLI¿FXOW\SOD\LQJD'9'
and/or CD disc on this DVD player, please contact
Customer Service.
This DVD player requires discs/recordings to meet
certain technical standards in order to achieve
optimal playback quality. There are many different
types of recordable disc formats. Not all recordable
discs will operate or produce optimal playback
quality. The technical criteria set forth in this owner's
manual are meant only as a guide.
You must obtain any required permission from
copyright owners to download or use copyrighted
content. We cannot and do not grant such
permission.
Supported Formats
JPEG/Pictures
7KH¿OHH[WHQVLRQVKDVWREH
.JPG and not JPEG .
-JPEG/ISO format.
-
Maximum resolution: 5760 x 3840.
0D[LPXP¿OHVL]H0
-It can only display DCF-standard still pictures or
JPEG pictures such as TIFF.
Tips:
– Maximum 100 sessions for CD and 10 multi border
for DVD are supported.
– For DVD-R, DVD-RW multi border, only finalized
disc can be supported.
– For DVD+R and DVD+RW multi border both
¿QDOL]HGDQGXQ¿QDOL]HGGLVFFDQQRWEHVXSSRUWHG
Getting Started
Extra InformationAdvanced PlaybackBasic PlaybackBasic DVD features
14
Starting disc playback
A Turn on the TV and select the video input connected
to the DVD player.
B Press 2I STANDBY to turn on the DVD player.
C Press ç to open the disc tray.
D Place a disc onto the disc tray with the label facing
up, then press ç.
ÎFor double-sided discs, load the side which you
want to play facing down.
E Playback may start automatically. If not, press .
ÎIf a disc menu appears on the TV, see page 15
'Using the disc menu'.
ÎIf the parental control was activated for the
inserted disc, you have to enter your four-digit
password,
see page 19.
ÎFor more playback features, see pages 14 - 18.
Tips:
-Do not overturn the DVD player while disc loading,
playing or ejecting.
-Do not close the disc tray manually even if the
power is switched off.
Basic playback control
Unless otherwise stated, all operations described are
based on Remote Control use.
Pausing playback
A During playback, press to pause playback and
display a still picture with muted sound.
ÎSound will be muted.
B To resume normal playback, press again.
Skipping chapter/track
z Press / to skip to the previous or next
chapter/track during playback.
z Press DISPLAY to display the disc information text
line for title/chapter/track(example - 00/08).
z Use numeric keypad to enter valid title/chapter/
track number, then press OK.
ÎThe playback skips to the selected tittle/chapter/
track.
la
y
bac
Stopping playback
A
During playback, press
once, The DVD player
memorises the stopped point. Press
to resume
playback from the location where you stopped
playback.
B
If you press STOP
twice, the DVD player will
cancel the resume function.
Tips:
-Screen saver will start automatically if the disc
playback is stopped for about 2 minutes.
-The player will automatically switch to Power
Standby mode if you do not press any buttons for
about 10 minutes after the disc has stopped playing.
Operations for video playback (DVD/
VCD/SVCD)
Using the disc menu
Depending on the disc, a menu may appear on the
TV screen once you load in the disc.
z
Use
W
/
X
/
S
/
T
or number buttons on the remote
control to select a playback feature or item, then
press OK to start playback.
z
Press MENU on the remote control to access or
remove the menu.
Zooming In
This function allows you to enlarge the picture on the
TV screen and to pan through the enlarged picture.
A During playback, press ZOOM repeatedly to display
the picture with different scales.
zUse W/X/S/T to pan through the enlarged picture.
B Press ZOOM repeatedly to return to the original size.
Forward/ Reverse Searching
You can fast forward or fast reverse a disc during
playback and select a desired search speed.
For DVD, VCD, SVCD, CD.
A During playback, press .N to select the
required speed: X2, X4, X8, X16(backward or
forward).
ÎSound will be muted (DVD/VCD/SVCD) or
intermittent (CD).
B To return to normal speed, press .
Selecting various repeat functions
Repeat play mode
The repeat play options vary depending on the disc
type.
A While playing a disc, press REPEAT repeatedly to
choose a repeat options.
For DVD
-Repeat Chapter (currently playing chapter)
-Repeat Title (currently playing title)
-Off (cancel)
Playback Feature
Extra Information
Advanced Playback
Basic Playback
Basic DVD features
15
For Video CD, Audio CD
-Repeat Single (currently playing track)
-Repeat All (entire disc)
-Off (cancel)
JPEG
5HSHDW6LQJOHFXUUHQWO\SOD\LQJ¿OH
-Repeat All (current folder)
-Off (cancel)
Tip:
-For VCD2.0/SVCD discs, repeat playback is not
possible if the PBC mode is turned on.
Repeating a section within a chapter/
track
<RXFDQUHSHDWWKHSOD\EDFNRIDVSHFL¿FVHJPHQW
within a chapter or track. To do this, you must mark
the start and end of the segment you want.
A While playing a disc, press A - B at your chosen
starting point.
B Press A - B again at your chosen end point.
Î The section will now repeat continuously.
C To exit the sequence, press A - B.
Viewing the disc playback Information
You can view the disc information (such as current
title/chapter/track number, total playing time or
remaining time on the disc) without interrupting the
disc playback.
A During playback, press DISPLAY repeatedly on the
remote control.
ÎThe available disc information appears on the TV
screen with the following sequence.
Time
Time 00 03 33/01 24 46
(DVD)
Title
Title 1/1
(DVD)
Chapter
Chapter 2/8
(DVD)
Audio
Audio 1/1 6Ch
(DVD)
Subtitle
Subtitle 1/8 Eng
(DVD)
Angle
Angle 1/4
(DVD)
Time
Time 00 03 33/00 05 00
(VCD)
Track
Track 3/24
(VCD PBC OFF)
OR
Time
Time 00 03 33/00 05 00
(VCD PBC ON)
PBC On
(VCD PBC ON)
Title/Chapter/Track/Time selection
A Press SEARCH, then press S/T to select
{ Time }, { Title }, {
Chapter } or { Track }.
For VCD
PBC OFF
Track
Time
(desired time of the current track)
Disc Time
(desired time of the disc)
For DVD:
Title
Chapter
Time
(desired time of the disc)
B Use the Numbered buttons ( 0-9 ) to input a valid
number or time(such as 00:34:27). (This function
only apply to DVD/VCD/CD/SVCD.)
C Press OKWRFRQ¿UP
ÎThe playback skips to the selected title/chapter/
track/time.
Angle
z
When {Angle} information appears on the screen,
press
ANGLE button on the remote control
repeatedly to switch between different angles.
Î
Playback will go to the selected angle.
Special DVD Features
Playing a Title
A
Press MEMU.
ÎThe disc title menu appears on the TV screen.
B Use S/T/W/X or Numbered buttons (0-9) to select
a play option.
C Press OKWRFRQ¿UP
Changing the Audio Language
For DVD
Press
Language repeatedly to select different audio
languages.
Changing the Audio Channel
For VCD
z
Press Language to select the available audio
channels provided by the disc (Left, Right, Mix,
Stereo).
Subtitles
z
Press SUBTITLE repeatedly to select different
subtitle languages.
Playback Feature
Extra InformationAdvanced PlaybackBasic PlaybackBasic DVD features
16
Special VCD and SVCD Features
For VCD with Playback Control (PBC) feature
(version 2.0 only)
zPress MENU to toggle between PBC On and PBC
Off .
ÎIf you select PBC On , the disc menu (if available)
will appear on the TV.
ÎUse the numbered buttons (0-9) to select a play
option.
zPress
/ to go to the previous or next track.
ÎWhen
LVSUHVVHGDIWHUWKH¿UVWVHFRQGVRI
playback, playback will start from the beginning of
the current track. If you press the button within the
¿UVWVHFRQGVSOD\EDFNZLOOVWDUWIURPWKHEHJLQQLQJ
of the preceding track.
zDuring playback, pressing RETURN will return to
the menu screen (if PBC is on).
zPress MENU on the remote control to turn the PBC
off if you want to skip the index menu and playback
directly from the beginning.
Playing JPEG/ Kodak picture CD
IMPORTANT!
You have to turn on your TV and set
to the correct AV input. (See page 12, ‘
Finding your AV input ’ ).
General Operation
A Load a disc.
ÎThe disc reading time may exceed 30 seconds
GXHWRWKHFRPSOH[LW\RIWKHGLUHFWRU\¿OH
FRQ¿JXUDWLRQ
ÎThe data disc menu information (including at least
title, singer and album) appears on the TV screen.
B Press S / T to select the folder and press OK to
open the folder.
C Press S / TWRVHOHFWDWUDFN¿OH
D Press OKWRFRQ¿UP
Tips:
,I\RXKLJKOLJKWRQD-3(*¿OHDSUHYLHZZLOO
appear.
'XULQJ-3(*SOD\EDFNWKH/('ZLOOGLVSOD\WKH¿OH
number.
Playback Feature
Playback Selection
During playback, you can
z Press / to select the previous/next track/
¿OHLQWKHFXUUHQWIROGHU
z Press repeatedly to pause/resume playback.
z During playback, press / to access fast
forward or fast reverse with the required speed: X2,
X4, X8, X16.
Play modes for Audio CD/JPEG
You are able to modify the play modes through the
toolkit which appears on the right of below picture
on the screen. Press W / X to navigate between the
windows and S / T buttons to select Filter/Repeat
or play mode items. Then press OK WRFRQ¿UP
3OHDVHUHIHUWREHORZVWHSVWRSOD\EDFN¿OHVWUDFNV
in the Program View list:
A Press twice.
B Select Edit Mode in the toolkit then press OK to
start edit mode.
C 6HOHFWD¿OHWUDFNRUPRUH¿OHVWUDFNV\RXZDQWLQWKH
original view list.
D Select Add To Program in the toolkit then press
OK.
¥ will disappear from screen. It means that
WKH¿OHVWUDFNV\RXKDYHVHOHFWHGDOUHDG\DGGHGLQWR
the Program View list.
E Select Program View in the toolkit then press OK to
RSHQWKH¿OHWUDFNLQWKH3URJUDP9LHZOLVWWKDW\RX
already selected in step
C.
F Press WRSOD\EDFNDOO¿OHVWUDFNVLQWKH3URJUDP
View list.
The Toolkit has the following play mode items:
z Filter ( Audio/Photo/Video 6HWV¿OH¿OWHUV
z Repeat (Off/Single/ All):
Off: Resumes normal playback.
Single5HSHDWVWKHFXUUHQWWUDFN¿OH
All 5HSHDWVDOO¿OHVRQWKHFXUUHQWIROGHU
z Edit Mode: Program operation works only when
(GLW0RGHLVVHOHFWHG$IWHU¿QLVKLQJVWRULQJWKH
¿OHVWUDFNV\RXZDQWLQWRWKH3URJUDP9LHZOLVW
select “Edit Mode” again and press OK to release
edit mode.
z Program View:7RYLHZWUDFNV¿OHVLQWKH
Program View list. It is disabled if the Program View
list is empty.
2 /124
/----/0001.JPG
Filter
Repeat : Off
Edit Mode
..
0001
0008
1.1m
1.3m
1
10
11
2 /124
/----/0001.JPG
Filter
Repeat : Off
Edit Mode
..
0001
0008
1.1m
1.3m
1
10
11
Extra Information
Advanced Playback
Basic Playback
Basic DVD features
17
Playback Feature/ DVD Setup Menu Options
Using the Language setup menu
On-Screen Display (OSD) Language
The On-screen language for the system setup menu
will remain as you set it, regardless of various disc
languages.This menu contains various language
options for the language displayed on the screen.
A Press SETUP on the remote control.
Î The system setup menu appears.
OSD language :
Subtitle :
:
Audio
:
DVD Menu
English
Auto
English
English
Language
Video
Audio
Misc
Rating
B Press S / T to select {Language }, then press X.
C Press S / T to select {OSD language}, then press
X to access.
ÎThe options for the selected item appears.
ÎIf the selection in the menu is greyed out, that
means the feature is not available or not possible to
change at the current state.
D Use S/T to select a language and press OK to
FRQ¿UP
E To exit, press SETUP.
Subtitle/Audio/DVD Menu Subtitle
You can choose your own preferred language or
sound track from audio, subtitles and DVD menu
languages. If the language selected is not available
on the disc, the disc’s default language will be used
instead.
Tips:
-Some DVD video discs may be set to display
subtitles in a different language other than
you selected. A prior subtitle language may be
programmed on the disc.
-Some DVD video discs allow you to change subtitle
selections only via the disc menu. If this is the case,
press the MENU button and choose the appropriate
subtitle language from the selection on the disc
menu.
-Some DVD video discs may not be played in a
different audio language that you selected. A prior
language may be programmed on the disc.
-Some DVD discs may not include your pre-selected
language. In this case, the DVD player
automatically displays discs menus consistent with
the disc’s initial language setting.
z Add To Program$GG¿OHVWUDFNVWRWKH3URJUDP
View list. It is disabled if Edit Mode is not selected.
7KHPD[LPXPQXPEHURI¿OHVWUDFNVFDQEHDGGHG
is 30.)
z Browser View7RYLHZ¿OHVWUDFNVLQWKH2ULJLQDO
View list.
z Clear Program'HOHWHWKH¿OHVWUDFNVLQWKH
Program View list.
Î6HOHFWD¿OHWUDFNRUPRUH\RXZDQWWRGHOHWHLQ
stop mode.
¥ ZLOODSSHDUEHVLGHVWKHGHOHWHG¿OH
track.Select Clear Program and then press OK . It
is disabled if Edit mode is not selected.
Zoom picture ( JPEG)
z During playback, press ZOOM repeatedly to
display the picture with different scales.
z Use S / T / W / X to view the zoomed picture.
Rotate picture (JPEG)
z During playback, press S / T / W / X to rotate the
picture on the TV screen.
S / T ÀLSWKHSLFWXUHYHUWLFDOO\E\
WURWDWHWKHSLFWXUHDQWLFORFNZLVHE\
XURWDWHWKHSLFWXUHFORFNZLVHE\
Tip:
-It may not be possible to play certain JPEG disc
GXHWRWKHFRQ¿JXUDWLRQDQGFKDUDFWHULVWLFVRIWKH
disc or condition of the recording.
-You may reduce the JPEG size for quicker
SHUIRUPDQFHODUJH¿OHVPD\WDNHORQJWLPHWR
process.
This DVD Player setup is carried out via the TV,
enabling you to customise the DVD player to suit
your particular requirement.
18
Extra InformationAdvanced PlaybackBasic PlaybackBasic DVD features
DVD Setup Menu Options
D Use S / T to select a setting and press OK to
FRQ¿UP
Example: {
HDMI }
ÎThe setting is selected and setup is completed.
E To exit, press SETUP.
Aspect Ratio
7KHSLFWXUHVKDSHFDQEHDGMXVWHGWR¿W\RXU79DQG
the format must be available on the playback disc.
Otherwise, the TV display will not affect the picture
during playback.
A In Video , press S / T to select {Aspect Ratio },
then press X.
{
4:3 }
Select this if you have a normal TV. A
wide-screen
source display with black bars on the top and bottom
will be displayed on the TV screen.
{ 16:9 }
Select this for wide-screen TV (frame ratio 16:9).
B Use S / T to select a setting and press OK to
FRQ¿UP
View Mode
8VHYLHZPRGHWRVFDOHDQLPDJHWKDW¿WVWRWKH79
screen s width and height.
A In Video , press S / T to select { View Mode },
then press X.
{
Fill }
Fill the screen with decoded image.
{ Original }
Display image as its original size.
B Use S / T to select a setting and press OK to
FRQ¿UP
Tip:
-Depending on the type of disc, you may not be able
to view the mode as selected.
OSD language
: English
Subtitle
: Auto
Language
Video
Audio
Misc
Rating
DVD Menu
Audio
English
Italian
Svedish
Danlish
Norwegian
A
Press SETUP.
B
Press
S
/
T
to select { Language }, then press
X
.
C
Press
S
/
T
to highlight one of the options below,
then press
X
.
{
Subtitle }
Select this to change the subtitle language.
{ Audio }
Select this to change the disc soundtrack language.
{
DVD Menu }
Select this to change the language of the disc menu.
D
Use
S
/
T
to select a language and press OK to
FRQ¿UP
E
Repeat steps
C
-
D
for other language settings.
IMPORTANT!
DVD discs and players are designed with regional
restrictions. Before playing a disc, make sure the
disc is for the same zone as your player.
- If '
not allowed at the moment' appears on the
TV screen when a button is pressed, it means the
function is not available on the current disc or at
the current time.
Using the Video setup menu
A Press SETUP on the remote control.
ÎThe system setup menu appears.
Aspect Ratio :
View Mode :
4:3
Auto Fit
Aspect Ratio :
View Mode :
4:3
Auto Fit
Aspect Ratio :
View Mode :
4:3
Auto Fit
Auto
Video Out
Smart Picture :
:Component
Standard
Language
Video
Audio
Misc
Rating
HD Resolution :
B Press S / T to select { Video }, then press X
C Press S / T to select an item, then press X to
access.
Example: {
Video Out }
ÎThe options for the selected item appears.
ÎIf the selection in the menu is greyed out, that
means the feature is not available or not possible to
change at the current state.
Aspect Ratio :
View Mode :
4:3
Auto Fit
Aspect Ratio :
View Mode :
4:3
Auto Fit
Aspect Ratio :
View Mode
Video Out
Smart Picture
Language
Video
Audio
Misc
Rating
HD Resolution
Fill
Original
Height Fit
Width Fit
Auto Fit
19
Extra Information
Advanced Playback
Basic Playback
Basic DVD features
DVD Setup Menu Options
Video Out
The video output of the DVD player can be selected
as “ Component ” / “ P-Scan” / “HDMI” / “RGB”.
A In 'Video', press S / Tto select { Video Out },
then press X.
{ Component }
Select this for component video connection.
{
P-Scan }
Select this when you connect your DVD player to
your TV, which has component video inputs that
supports progressive scan.
{
HDMI }
Select this for HDMI output.
{ RGB }
Select this for RGB output.
B Use S / T to select a setting and press OK to
FRQ¿UP
Smart Picture
7KLV'9'SOD\HUSURYLGHVIRXUSUHGH¿QHGVHWVRI
picture colour settings.
A In Video , press S / T to select {Smart Picture },
then press X.
{ Standard }
Select this for a preset standard picture setting.
{ Vivid }
Select this to make the picture brighter.
{ Cool }
Select this to make the picture softer.
{ Personal }
Select this to personalize your picture colour by
adjusting the brightness, contrast, tint and colour
(saturation).
B Use S / T to select a setting and press OK to
FRQ¿UP
C If you select { Personal }, then proceed to steps
D~G.
ÎThe setup menu appears.
Brightness
Contrast
Tint
Colour
0
0
0
0
Close
D Press S / T to highlight one of the following options.
Brightness
Increase the value to brighten the picture or vice
versa. Choose zero (0) for average setting.
Contrast
Increase the value to sharpen the picture or vice
versa. Choose zero (0) to balance the contrast.
Tint
Increase the value to darken the picture or vice
versa. Choose zero (0) for average setting.
Colour
Increase the value to enhance the
colour in your
picture or vice versa. Choose zero (0) to balance the
colour.
E Press W / X to adjust the setting that best suits
your personal preference.
F Repeat steps D~ E to adjust your picture
preference.
G Press S / T to select Close and press OK to
FRQ¿UP
HD Resolution
The HD Resolution of the DVD player can be
selected according to your preference and the
connected HDMI TV.
A In 'Video', press S / Tto select { VIDEO OUT }
then press X to select HDMI.
B Press S / Tto select { HD Resolution }, when
video out was HDMI, then press X.
{ Auto }
Output automatically based on your
display’s supported resolution.
{
480p/576p }
Progressive output in 480/576 lines.
{
720p }
Progressive output upscale to 720 lines.
{
1080i }
Interlaced output upscale 1080 lines.
{
1080p }
Progressive output upscale 1080 lines.
C Use S / T to select a setting and press OK to
FRQ¿UP
Using the Audio setup menu
A Press SETUP on the remote control.
ÎThe system setup menu appears.
:
:
:
Digital Output
Night Mode
Down Sampling
All
Off
On
Language
Video
Audio
Misc
Rating
:
3D Effects
Of
f
B Press S / T to select { Audio }, then press X.
C Press S / Tto select an item, then press X to
access.
Example: {
Night Mode }
ÎThe options for the selected item appears.
ÎIf the selection in the menu is greyed out, that
means the feature is not available or not possible to
change at the current state.
D Use S / T to select a setting and press OK to
FRQ¿UP
Example: {
On }
ÎThe setting is selected and setup is completed.
E To exit, press SETUP.
Digital Output
Select this if you connect to a multichannel decoder/
receiver.
A In Audio , press S / T to select { Digital Output },
then press X.
{ All }
Select this if the connected device has a built-in
multichannel decoder that supports one of the
multichannel audio format (Dolby Digital).
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/