Vista Optio OPNVR Quick Manual

Brand: Vista

Model: Optio OPNVR

Category: Supplementary music equipment

Type: Quick Manual

Vista Optio OPNVR is a powerful surveillance solution for professional security applications. With its advanced features, it offers reliable video recording, storage, and playback capabilities. This high-quality NVR supports up to 8 IP cameras, providing comprehensive monitoring coverage. Its intuitive interface and remote access options make it easy to manage and monitor your surveillance system from anywhere. The OPNVR also features HDMI and VGA outputs for flexible video display options.

OPNVR QSG version 1.1

OPNVR

Please read this manual thoroughly before use and keep it handy for future reference.

Quick Guide

Before You Begin

Read these instructions before installing or operating this product.

Note: This installation should be made by a qualified service person and should conform to local codes.

This manual provides installation and operation information. To use this document, you must have the

following minimum qualifications:

• A basic knowledge of CCTV systems and components

• A basic knowledge of electrical wiring, low-voltage electrical connections and IP networking/infrastructure

Intended use

Only use this product for its designated purpose; refer to the product specification and user documentation.

Customer Support

For assistance in installing, operating, maintaining and troubleshooting this product refer to this document and

any other documentation provided. If you still have questions, please contact Norbain Technical Support

and Sales:

Norbain SD, Inspired, Easthampstead Road, Bracknell, Berkshire, RG12 1YQ, England.

UK +44 (0) 118 912 5000 / Vista Technical Support +44 (0) 118 912 5125

Note: You should be at the equipment and ready with details before calling Technical Support.

Conventions Used in this Manual

Boldface or button icons highlight command entries. The following WARNING, CAUTION and Note

statements identify potential hazards that can occur if the equipment is not handled properly:

* WARNING:

Improper use of this equipment can cause severe bodily injury or equipment damage.

* CAUTION:

Improper use of this equipment can cause equipment damage.

Note: Notes contain important information about a product or procedure.

This apparatus is manufactured to comply with the radio interference.

A Declaration of Conformity in accordance with the following EU standards has been made. The

manufacturer declares that the product supplied with this document is compliant the provisions of

the EMC Directive 2004/108/EC, the CE Marking Directive 93/68 EEC and all associated

amendments.

All lead-free products offered by the company comply with the requirements of the European law on the

Restriction of Hazardous Substances (RoHS) directive: 2011/65/EU, which means our manufacture processes

and products are strictly “lead-free” and without the hazardous substances cited in the directive.

The crossed-out wheeled bin mark symbolizes that within the European Union the product must be

collected separately at the product end-of-life. This applies to your product and any peripherals marked with

this symbol. Do not dispose of these products as unsorted municipal waste.

* This symbol indicates electrical warnings and cautions.

** This symbol indicates general warnings and cautions.

NORBAIN SD reserves the right to make changes to the product and specification of the product from time to time

without prior notice.

WARNINGS AND CAUTIONS:

To reduce the risk of fire or electric shock, do not insert any metallic objects through the ventilation grills or other

openings on the equipment.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Clean only with dry cloth.

6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

8. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong is provided for your safety. If the provided plug does not

fit into your outlet, consult an electrician for replacement of the obsolete outlet.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

10. Only use attachments/accessories specified by the manufacturer.

11. Unplug this apparatus during lightning storms or when unused for long periods of time.

12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

13. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE

PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY

SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS

YOU ARE QUALIFIED TO DO SO.

14. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 power source

only.

CE COMPLIANCE STATEMENT

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in

which case the user may be required to take adequate measures.

Error! No text of specified style in document. 2

Getting Started

Checking the Components

Network Video Reorder 1

Quick Start Guide 1

Power Supply (or power cable) 1

USB Mouse 1

When you receive the Device, please check against the below. If any of the items are missing or

damaged, contact Norbain after-sales support immediately.

Sequence Checking items Requirement

1 Package

Appearance No obvious damage.

Packing materials

No broken or distorted positions that could be caused

by hit.

2 Labels Labels on the device

Not torn up.

Do not tear up or throw away the labels; otherwise the

warranty services are not ensured. You need to

provide the serial number of the product when you call

the after-sales service.

3 Device Appearance No obvious damage.

Check your package to make sure that you received the complete system, including all components

listed above.

Using a mobile phone scan the above QR code for a link to all literature and available software.

Error! No text of specified style in document. 3

Rear Panel

No. Port Name Function

1 PoE Ports RJ45 connection for network cameras

2 Audio input port Phono connection for devices such as microphones.

3 Audio output port Phono connection for devices such as speakers.

4 HDMI port High definition audio and video signal output port.

5 Network port RJ45 Ethernet port for client network.

6 RS232 port For factory use.

7 USB port

Connects to external devices such as USB storage and mouse.

8 VGA port Secondary video output for video.

9 Power input Mains power or 12VDC PSU (model dependent).

10 Power button Power on / off

Ground terminal.

Power cable

fastener

Clamp to secure the power cable to the DVR in case.

Error! No text of specified style in document. 4

Local Configuration

Device initialization

When booting up for the first time, you need to configure the password information for admin (by

default).

It is strongly recommended for you to keep the admin password in a secure place modify it

regularly.

Error! No text of specified style in document. 5

Startup Wizard

The Startup Wizard helps you configure the basic settings to set up the Device.

After you have initialized the Device, the Startup Wizard interface is displayed.

If you select the Auto-check for updates check box, the system will notify you automatically

when updates are available.

Error! No text of specified style in document. 6

Configuring General Settings

You can configure the general settings for the Device such as Device name, language, and settings

for instant playback.

You can also configure general settings by selecting Main Menu > SYSTEM > GENERAL >

General.

Error! No text of specified style in document. 7

Configuring Date and Time Settings

You can configure the system time, choose the time zone, set the daylight saving time, and enable

the NTP server.

You can also configure date and time settings by selecting Main Menu > SYSTEM > GENERAL >

Date & Time.

Error! No text of specified style in document. 8

Configuring Network Settings

You can configure the basic network settings such as net mode, IP version, and IP address of the

Device.

You can also configure network settings by selecting Main Menu > NETWORK > TCP/IP.

Error! No text of specified style in document. 9

Configuring P2P Settings

You can add the Device into your cell phone client or the platform to manage.

You can also configure P2P function by selecting Main Menu > NETWORK > P2P.

Make sure the DVR is connected to the Internet, the Status box of the P2P interface, will

display if it is Online.

Error! No text of specified style in document. 10

Camera Registration

Select Main Menu > SETTING > CAMERA > Registration. The Registration interface is

displayed.

You can register remote devices using the following methods:

 Click Device Search. In the result list, double-click the remote device or select the check

box in front of the device, and then click Add to register the remote device.

 Click Manual Add and enter the IP address of the remote device to register it.

Error! No text of specified style in document. 11

Configuring Recorded Video Storage Schedule

Select Main Menu > STORAGE > SCHEDULE > Record, the Record interface is displayed.

The default setting is 24 hours recording for all channels. You can modify the settings if needed.

Error! No text of specified style in document. 12

Recorded Video Playback

Right click for Main Menu > SEARCH, the video search interface is displayed.

You can view, search, and play back the recorded video.

Logout

On the top right of the Main Menu interface or any interface after you have entered the Main

Menu, the logout option is available, select Logout to exit the DVR.

Error! No text of specified style in document. 13

Adding Device into EasyViewer APP

Use your mobile phone to scan the QR code with the EasyViewer application.

Open the application and tab the menu is displayed.

Tap Device Manager Add Device, the Add Device interface is displayed.

Tap P2P, enter a name for the DVR, the username and password, scan the QR code

Under Device SN, then tap Start Live Preview. The DVR is added and displayed on the live view

interface of the cell phone.

Error! No text of specified style in document. 14

Web Login

Open the IE browser, enter the IP address of the Device [192.168.1.108], and then press Enter.

The Login in dialog box is displayed.

Enter the user name and password.

Device initialization is required at the first login. The default administrator account is

admin. The password is the one that was configured during initializing settings. To

security your account, it is recommended to keep the password properly and change it

periodically. You can select the protocol type as TCP, UDP, or MULTICAST depending

on the networking structure. The default is TCP. If you forgot the password, click

Forgot Password to reset the password. When entering the Live interface for the first

time, follow the onscreen instructions "Please install plugins first!" to install the plugins

Using a mobile phone scan the above QR code for a link to all literature and available software.

Error! No text of specified style in document. 15

NORBAIN SD

Inspired

Easthamptead Road

Bracknell

Berkshire

RG12 1YQ

(Subject to change without notice)

Vista Optio OPNVR Quick Manual

Brand: Vista

Model: Optio OPNVR

Category: Supplementary music equipment

Type: Quick Manual

Download PDF

report

Vista Optio OPNVR Quick Manual

Vista Optio OPNVR Quick Manual

Related papers

Other documents