ATL Berkshire is a Power over Ethernet (PoE) module that enables the Berkshire 5000 IP telephone to operate on an Ethernet network without the need for local mains power.
Key features and uses of the ATL Berkshire PoE Module:
- Eliminates the need for a separate power supply for the Berkshire 5000 IP telephone, simplifying installation and reducing cable clutter.
- Compatible only with the Berkshire 5000 IP telephone; using it with other devices may void the warranty and pose safety risks.
- Easy to install by replacing the existing power supply unit (PSU) and desk bracket with the PoE module.
ATL Berkshire is a Power over Ethernet (PoE) module that enables the Berkshire 5000 IP telephone to operate on an Ethernet network without the need for local mains power.
Key features and uses of the ATL Berkshire PoE Module:
- Eliminates the need for a separate power supply for the Berkshire 5000 IP telephone, simplifying installation and reducing cable clutter.
- Compatible only with the Berkshire 5000 IP telephone; using it with other devices may void the warranty and pose safety risks.
- Easy to install by replacing the existing power supply unit (PSU) and desk bracket with the PoE module.
ATL Berkshire POE Module
Quick Start Guide
Thank you for purchasing your ATL Berkshire POE Module. This
module enables the Berkshire 5000 IP telephone to operate on an
Ethernet network without the need for local mains power. Before you
start you need to ensure that your network supports “Power Over
Ethernet”.
BERKSHIRE IP TELEPHONES
Your Berkshire POE Module is supplied for use only with the
Berkshire 5000 IP telephone. It is important to note that its use to
power other IP telephones or other equipment of any kind will void
the guarantee, may result in damage to your Berkshire POE Module
and presents a potential safety hazard.
CONNECTING YOUR BERKSHIRE POE MODULE
To convert a Berkshire 5000 IP telephone from operating with a PSU
to operating with POE please complete the following steps:-
1. Unplug all the existing cables from the Berkshire IP telephone
2. Unplug the PSU from the mains socket and remove it
3. Unclip the Desk Bracket from the underside of the Berkshire IP
telephone
4. Clip the Berkshire POE Module to the underside of the
Berkshire IP telephone
5. Plug the 6 Vdc power jack of the Berkshire POE Module into
the socket on the Berkshire IP telephone labelled “DC6V”
6. Plug the RJ45 ethernet plug of the Berkshire POE Module into
the socket on the Berkshire IP telephone labelled “LAN”
7. Plug the LAN cable that is connected to the network into the
port marked “LAN” on the Berkshire POE Module
8. Ensure that the network port to which the Berkshire POE
Module is connected supports “Power Over Ethernet” and that it
is enabled.
GUARANTEE
Your Berkshire POE Module is designed and manufactured to
exacting quality standards. This enables ATL Telecom Limited to
offer a 2 year guarantee from the date of purchase. This guarantee
protects against faulty material or workmanship, and applies to the
UK only and is not transferable.
The terms and conditions under which the guarantee will be valid are
as set out below.
Misuse or any modification carried out to the POE module, or
operation other than in accordance with the instructions supplied, will
invalidate the guarantee.
Damage arising from incorrect installation, accidental damage or
consequential loss, are not covered under the guarantee.
In the event of a fault developing during the period of the guarantee,
the POE module should be returned to your supplier, adequately and
safely packed, together with the proof of purchase.
The liability of ATL Telecom Limited will be limited to the cost of
repair or complete replacement of the same defective module, at the
discretion of the company. In the event that the same item is not
available, a suitable alternative will be offered.
The terms of this agreement do not affect your statutory rights.
MANUFACTURERS DECLARATION*
ATL Telecom Limited declares that this product is in conformity with
the essential requirements of the R & TTE directive 1999/5/EC.
*A copy of the Declaration of Conformity is available, upon request,
from ATL Telecom Limited.
TECHNICAL SUPPORT
• Telephone: +44 (0) 29 2050 0799
• Email: [email protected]
ATL Telecom Limited,
Fountain Lane,
St Mellons,
Cardiff. CF3 0FB
www.atltelecom.com
1/427/001/611 - Issue 2 Sept 2006
-
1
-
2
ATL Berkshire is a Power over Ethernet (PoE) module that enables the Berkshire 5000 IP telephone to operate on an Ethernet network without the need for local mains power.
Key features and uses of the ATL Berkshire PoE Module:
- Eliminates the need for a separate power supply for the Berkshire 5000 IP telephone, simplifying installation and reducing cable clutter.
- Compatible only with the Berkshire 5000 IP telephone; using it with other devices may void the warranty and pose safety risks.
- Easy to install by replacing the existing power supply unit (PSU) and desk bracket with the PoE module.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
ATL Product Berkshire 400 Plus User manual
-
ATL Product Berkshire 600 User manual
-
Polycom Integra VVX 500 Regulatory Notice
-
Poly SoundStation Duo Quick start guide
-
Polycom 2200-19000-122 User guide
-
Polycom Sound Station Duo Conference Phone User guide
-
Polycom SoundPoint IP 650 User manual
-
Polycom 2200-19000-122 User guide
-
Polycom VVX 400 Quick start guide
-
Poly SoundStation IP 5000 Quick start guide
