Pro-Ject Audio Systems Debut III Phono S/B Product information

Pro-Ject Audio Systems
Brand
Pro-Ject Audio Systems
Model
Debut III Phono S/B
Category
Audio turntables
Type
Product information

Pro-Ject Audio Systems Debut III Phono S/B is a manual turntable with electro mechanic speed change, fitted cartridge Ortofon OM 5E and integrated MM phono pre-amplifier. It has a quiet running AC motor with a two-step metal pulley drives the hub and platter via a flat-ground belt and an external power supply avoids potential electro-mechanical interference. The turntable is supplied with Ortofon OM 5E MM-cartridge fitted and the tonearm has uniform material: the tonearm tube and bearing housing are constructed from aluminium.

Pro-Ject Audio Systems Debut III Phono S/B is a manual turntable with electro mechanic speed change, fitted cartridge Ortofon OM 5E and integrated MM phono pre-amplifier. It has a quiet running AC motor with a two-step metal pulley drives the hub and platter via a flat-ground belt and an external power supply avoids potential electro-mechanical interference. The turntable is supplied with Ortofon OM 5E MM-cartridge fitted and the tonearm has uniform material: the tonearm tube and bearing housing are constructed from aluminium.

Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 27.3.06
Pro-Ject Debut III/Phono SB
Manual turntable with electro mechanic speed
change, fitted cartridge Ortofon OM 5E and
integrated MM phono pre-amplifier
Product information
Turntable
Chassis available in silver or matt black
A quiet running AC motor with a two-step metal pulley drives the hub and platter via a flat-ground belt.
The medium density fibre plinth stands on four feet which act as shock absorbers.
The motor is decoupled from the plinth to reduce vibration transmission.
The platter is a sandwich construction utilising the hub, a sheet-steel platter weighing 1,3Kg and a felt mat.
The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass
bearing housing.
Electronic speed change for 33 / 45 r.p.m. Switching to 78 r.p.m. is done manually.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6
The turntable is supplied with Ortofon OM 5E MM-cartridge fitted.
Uniform material: the tonearm tube and bearing housing are constructed from aluminium.
The headshell and undamped armtube are fashioned from a single piece.
The inverted horizontal bearings consist of two hardened stainless steel points bearing in sapphire cushes.
Flexible counterweight shaft avoids vibration at undesirable frequencies.
The counterweight supplied is suitable for cartridges weighing between 3,5 - 5,5g. An alternative
counterweight for cartridges weighing between 6 - 9g is available as an accessory part.
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
The straight armtube with an effective length of 8,6" reduces toe-in error.
The internal wiring consists of high-grade flexible copper from the headshell right through to the connection
cable.
The connection cable has gold-plated plugs and appropriate capacitance and inductance values.
A supplied 3,5 mm connector can be used to connect your Pro-Ject Debut III/Phono to any line level/auxiliary
input (Computer, Midi System, Mixer etc.).
Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.
Phono Pre-amplifier
Optimal channel separation through dual-mono circuitry
Technical specifications Phono Pre-amplifier
Noise floor 88dB Gain 32dB
THD 0,005% Output voltage typically 160mV/1kHz
Input impedance 47kohms/100pF at 4mV/1kHz
Power consumption 16V/40mA AC
RIAA-equalisation curve accuracy 20Hz - 20kHz / max. 0,5dB
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
The unit may only be connected to a line level input.
  • Page 1 1

Pro-Ject Audio Systems Debut III Phono S/B Product information

Pro-Ject Audio Systems
Brand
Pro-Ject Audio Systems
Model
Debut III Phono S/B
Category
Audio turntables
Type
Product information

Pro-Ject Audio Systems Debut III Phono S/B is a manual turntable with electro mechanic speed change, fitted cartridge Ortofon OM 5E and integrated MM phono pre-amplifier. It has a quiet running AC motor with a two-step metal pulley drives the hub and platter via a flat-ground belt and an external power supply avoids potential electro-mechanical interference. The turntable is supplied with Ortofon OM 5E MM-cartridge fitted and the tonearm has uniform material: the tonearm tube and bearing housing are constructed from aluminium.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents