Sony XR-CA360 Operating instructions

Brand: Sony

Model: XR-CA360

Category: Car media receivers

Type: Operating instructions

This manual is also suitable for

XR-CA360X

Sony XR-CA360 cassette car stereo offers a range of features to enhance your in-car audio experience. Listen to your favorite FM/MW/SW radio stations with the built-in tuner, or connect an optional CD or MD player to expand your system and enjoy high-quality audio playback. The unit also features an equalizer (EQ3) to customize the sound to your liking.

Actual total number: Sony XR-CA360X/CA360 (GB,AR) 3-246-852-32(1)

Operating Instructions

 2003 Sony Corporation

FM/MW/SW

Cassette Car

Stereo

For installation and connections, see the supplied installation/connections

manual.

3-246-852-32 (1)

XR-CA360X

XR-CA360

Welcome !

Thank you for purchasing this Sony Cassette

Player.

In addition to the cassette playback and radio

operations, you can expand your system by

connecting an optional CD/MD unit*

When you operate this unit or a connected

optional CD unit with the CD TEXT function,

the CD TEXT information will appear in the

display when you play a CD TEXT disc*

You can connect a CD changer, an MD changer,

a CD player, or an MD player.

A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names.

This information is recorded on the disc.

Precautions

•If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

•If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

•If no sound comes from the speakers of a

2-speaker system, set the fader control to the

center position.

•When a tape is played back for a long period,

the cassette may become warm because of

the built-in power amplifier. However, this is

not a sign of malfunction.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

To maintain high quality sound

If you have drink holders near your audio

equipment, be careful not to splash juice or

other soft drinks onto the car audio. Sugary

residues on this unit or cassette tapes may

contaminate the playback heads, reduce the

sound quality, or prevent sound reproduction

altogether.

Cassette cleaning kits cannot remove sugar

from the tape heads.

Notes on Cassettes

Cassette care

•Do not touch the tape surface of a cassette, as

any dirt or dust will contaminate the heads.

•Keep cassettes away from equipment with

built-in magnets such as speakers and

amplifiers, as erasure or distortion on the

recorded tape could occur.

•Do not expose cassettes to direct sunlight,

extremely cold temperatures, or moisture.

•Slack in the tape may cause the tape to be

caught in the machine. Before you insert the

tape, use a pencil or similar object to turn the

reel and take up any slack.

•Distorted cassettes and loose labels can cause

problems when inserting or ejecting tapes.

Remove or replace loose labels.

•The sound may become distorted while

playing the cassette. The cassette player head

should be cleaned after each 50 hours of use.

Slack

Cassettes longer than 90 minutes

The use of cassettes longer than 90 minutes is

not recommended except for long continuous

play. The tape used for these cassettes is very

thin and tends to stretch easily. Frequent

playing and stopping of these tapes may cause

them to become entangled in the cassette deck

mechanism.

Table of Contents

This Unit Only

With Optional Equipment

Location of controls ................................................. 5

Getting Started

Resetting the unit ................................................ 6

Detaching the front panel .................................. 6

Setting the clock .................................................. 7

Cassette Player

Listening to a tape ............................................... 7

Radio reception during fast-forwarding or

rewinding of a tape

— Automatic Tuner Activation (ATA) ....... 8

Radio

Storing stations automatically

— Best Tuning Memory (BTM) ................... 8

Storing only the desired stations ...................... 9

Receiving the stored stations ............................. 9

Other Functions

Adjusting the balance and fader ..................... 10

Attenuating the sound ..................................... 10

Changing the sound and display settings ..... 10

Setting the equalizer

— EQ3............................................................ 11

CD/MD Unit

Playing a CD or MD ......................................... 12

Playing tracks repeatedly

— Repeat Play .............................................. 13

Playing tracks in random order

— Shuffle Play .............................................. 13

Additional Information

Maintenance....................................................... 14

Removing the unit ............................................ 15

Specifications ..................................................... 16

Troubleshooting guide ..................................... 17

Location of controls

Refer to the pages listed for details.

1 SOURCE (Radio/CD/MD) button

8, 9, 11, 12

2 MODE button

During radio reception:

Band select 8, 9

During CD/MD playback:

CD/MD unit select 12

3 Volume +/– button 7, 10, 11

4 Z (eject) button 7, 8, 9, 12

5 Display window

6 m/M (fast winding)/DIR (tape

transport direction change) buttons 7, 8

7 SEEK button

Seek 9

Automatic Music Sensor 13

Manual search 13

8 DSPL (display mode change) button

7, 12

9 EQ3 button 11

q; RELEASE (front panel release) button

6, 14

qa SEL (select) button 7, 10, 11, 12

qs RESET button (located on the front side

of the unit behind the front panel) 6

qd ATT (attenuate) button 10

qf Number buttons 10, 12

During radio reception:

Preset number select 9

During CD/MD playback:

(1) DISC – 13

(2) DISC + 13

(3) REP 13

(4) SHUF 13

qg BTM/ATA button 8

qh SENS button 9

qj OFF button* 6

* Warning when installing in a car

without ACC (accessory) position on

the ignition key switch

Be sure to press (OFF) on the unit for 2

seconds to turn off the clock display after

turning off the engine.

When you press (OFF) momentarily, the

clock display does not turn off and this

causes battery wear.

XR-CA360X/CA360

SOURCE

MODE

SEL

RELEASE

EQ3

DSPL

ATT

DISC

REP

SHUF

ATA

123456

BTM

OFFSENS

SEEK

DIR

Attaching the front panel

Attach part A of the front panel to part B of

the unit as illustrated and push the left side

into position until it clicks.

Notes

• Be sure not to attach the front panel upside

down.

• Do not press the front panel too hard against the

unit when attaching it.

• Do not press too hard or put excessive pressure

on the display window of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight or

where there may be a considerable rise in

temperature.

Caution alarm

If you turn the car ignition off without

removing the front panel, the caution alarm

will beep for a few seconds.

If you connect an optional power amplifier and

do not use the built-in amplifier, the beep

sound will be deactivated.

Getting Started

Resetting the unit

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Remove the front panel and press the RESET

button with a pointed object, such as a

ballpoint pen.

Note

Pressing the RESET button will erase the clock

setting and some memorised functions.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

1 Press (OFF).

2 Press (RELEASE), then slide the front

panel a little to the left, and pull it off

towards you.

Notes

• Be sure not to drop the panel when detaching it

from the unit.

• If you detach the panel while the unit is still

turned on, the power will turn off automatically

to prevent the speakers from being damaged.

• When carrying the front panel with you, use the

supplied front panel case.

RESET button

(OFF)

(RELEASE)

Cassette Player

Listening to a tape

Insert a cassette.

Playback starts automatically.

The side facing up is played.

The side facing down is played.

Tip

To change the tape‘s playback direction, press m

and M.

To stop playback and eject the

cassette

Press Z.

Fast-winding the tape

During playback, press m or M.

* The indicator will flash while fast-winding the

tape.

To start playback during fast-forwarding or

rewinding, press the other fast-winding button

partially until the locked button is released.

To rewind

Direction

indicator*

FWD

REV

To advance

Setting the clock

The clock uses a 12-hour digital indication.

Example: To set the clock to 10:08

1 Press (DSPL) for 2 seconds.

The hour indication flashes.

1 Press either side of the volume button

to set the hour.

2 Press (SEL).

The minute indication flashes.

3 Press either side of the volume button

to set the minute.

2 Press (DSPL).

The clock starts.

After the clock setting is complete, the

display returns to normal play mode.

to go forward

to go back

to go forward

to go back

Radio

Storing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and stores them in the order of their

frequencies. You can store up to 6 stations on

each band (FM1, FM2, FM3, MW, SW1, and

SW2).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select the

radio.

In case of tape playback, press Z to eject the

tape.

Each time you press (SOURCE), the source

changes as follows:

Radio t CD* t MD*

* If the corresponding optional equipment is

not connected, this item will not appear.

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

FM1 t FM2 t FM3 t MW t SW1t SW2

3 Press (BTM) (ATA) for 2 seconds.

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

Notes

• The unit does not store stations with weak

signals. If only a few stations can be received,

some number buttons will retain their former

setting.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

Radio reception during

fast-forwarding or

rewinding of a tape

— Automatic Tuner Activation (ATA)

When fast-forwarding or rewinding with the

m or M button, the radio will turn on

automatically.

During playback, press (BTM) (ATA)

repeatedly until “ATA-ON” in the display

appears.

ATA-ON y ATA-OFF

ATA mode starts.

To return to normal play mode, select “ATA-

OFF.”

Storing only the desired

stations

You can preset up to 18 FM stations (6 each for

FM1, 2, and 3), up to 6 MW stations, and up to

12 SW stations (6 each for SW1 and 2) in the

order of your choice.

1 Press (SOURCE) repeatedly to select the

radio.

In case of tape playback, press Z to eject the

tape.

2 Press (MODE) repeatedly to select the

band.

3 Press either side of (SEEK) to tune in the

station that you want to store on the

number button.

4 Press the desired number button ((1) to

(6)) until “MEM” appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

Receiving the stored

stations

1 Press (SOURCE) repeatedly to select the

radio.

In case of tape playback, press Z to eject the

tape.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6)) on

which the desired station is stored.

If you cannot tune in a preset

station

— Automatic tuning/Local Seek Mode

Automatic tuning:

Press either side of (SEEK) to search for

the station.

Scanning stops when the unit receives a

station. Press either side of (SEEK)

repeatedly until the desired station is

received.

Local Seek Mode:

If the automatic tuning stops too

frequently, press (SENS) repeatedly until

“LOCAL-ON” appears.

“LCL” indicator is displayed.

Only the stations with relatively strong

signals will be tuned in.

Tip

If you know the frequency of the station you want

to listen to, press either side of (SEEK) until the

desired frequency appears (manual tuning).

If FM stereo reception is poor

— Monaural Mode

During radio reception, press (SENS)

repeatedly until “MONO-ON” appears.

“MONO” indicator is displayed.

The sound improves, but becomes

monaural (“ST” disappears).

To return to normal radio reception mode,

select “MONO-OFF.”

Changing the sound and

display settings

The following items can be set:

•A.SCRL (Auto Scroll)* (page 12).

•M.DSPL (Motion Display)

– the demonstration mode which appears

when the tape is ejected and no source is

selected (e.g., tuner is turned off).

•BEEP – to turn the beep sound on or off.

1 Press (SEL) and the desired preset

number button simultaneously.

(SEL) + (3): A.SCRL*

(SEL) + (4): M.DSPL

(SEL) + (6): BEEP

* When no CD or MD is playing, this item will

not appear.

2 Press (SEL) and the preset number

button repeatedly to select the desired

setting (Example: ON or OFF).

Other Functions

Adjusting the balance and

fader

You can adjust the balance and fader.

1 Press (SEL) repeatedly until “BAL” or

“FAD” appears.

Each time you press (SEL), the item

changes as follows:

LOW* t MID* t HIGH* t

BAL (left-right) t FAD (front-rear)

* When EQ3 is activated (page 11).

2 Press either side of the volume button to

adjust the selected item.

Adjust within 3 seconds after selecting the

item.

Attenuating the sound

Press (ATT).

After “ATT-ON” momentarily flashes, the

“ATT” indication appears in the display.

To restore the previous volume level, press

(ATT) again.

“ATT-OFF” flashes momentarily.

Setting the equalizer

— EQ3

You can select an equalizer curve for 7 music

types (XPLOD, VOCAL, CLUB, JAZZ, NEW

AGE, ROCK, CUSTOM, and OFF (equalizer

OFF)).

You can store a different equalizer setting for

each source.

Selecting the equalizer curve

1 Press (SOURCE) to select a source (Radio,

CD or MD) or insert a cassette.

2 Press (EQ3) repeatedly to select the

desired equalizer curve.

Each time you press (EQ3), the item

changes.

To cancel the equalizing effect, select

“OFF.”

Adjusting the equalizer curve

You can store and adjust the equalizer settings

for different tone ranges.

1 Press (SOURCE) to select a source (Radio,

CD or MD) or insert a cassette.

2 Press (EQ3) repeatedly to select the

desired equalizer curve.

3 Adjusting the equalizer curve.

1 Press (SEL) repeatedly to select the

desired tone range.

Each time you press (SEL), the tone

range changes.

LOW t MID t HI (t BAL t FAD)

2 Press either side of the volume button

repeatedly to adjust to the desired

volume level.

The volume level is adjustable by 1 dB

steps from –10 dB to +10 dB.

3 Repeat step 1 and 2 to adjust the

equalizer curve.

To restore the factory-set equalizer

curve, press (SEL) for 2 seconds.

After 3 seconds, the display returns to

normal play mode.

Note

When EQ3 is set to “OFF,” you cannot adjust the

equalizer settings.

Automatically scrolling a display

item — Auto Scroll

If the disc name, artist name, or track name on

a CD TEXT disc or MD exceeds 8 characters

and the Auto Scroll function is on, information

automatically scrolls across the display as

follows:

• The disc name appears when the disc has

changed (if the disc name is selected).

• The track name appears when the track has

changed (if the track name is selected).

If you press (DSPL) to change the display

item, the disc or track name of the CD TEXT or

MD disc is scrolled automatically whether you

set the function ON or OFF.

During playback, press (SEL) and (3) to

select “A.SCRL-ON.”

To cancel Auto Scroll, select “A.SCRL-OFF.”

Note

For some discs with very many characters, the

following cases may happen:

— Some of the characters are not displayed.

— Auto Scroll does not work.

With Optional Equipment

CD/MD Unit

This unit can control external CD/MD units.

If you connect an optional CD unit with the

CD TEXT function, the CD TEXT information

will appear in the display when you play a CD

TEXT disc.

Playing a CD or MD

1 Press (SOURCE) repeatedly to select CD

or MD.

In case of tape playback, press Z to eject the

tape.

2 Press (MODE) until the desired unit

appears.

CD/MD playback starts.

When a CD/MD unit is connected, all the

tracks play from the beginning.

Tip

With the optional MG Memory Stick System-up

Player MGS-X1 connected to this unit, press

(SOURCE) to select “MD,” then press (MODE) to

select the unit number of the MD (MD1 or MD2,

etc.).

Changing the display item

Each time you press (DSPL) during CD, CD

TEXT, or MD playback, the item changes as

follows:

Elapsed playback time t

Disc name*

/Artist name*

t Track name*

Clock

If you have not labeled the disc or if there is no

disc name prerecorded on the MD, “NO NAME”

appears in the display.

If you play a CD TEXT disc, the artist name

appears in the display after the disc name. (Only

for CD TEXT discs with the artist name.)

If the track name of a CD TEXT disc or MD is not

prerecorded, “NO NAME” appears in the

display.

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press either side of

(SEEK) momentarily for each track you

want to skip.

Locating a specific point in a track

— Manual Search

During playback, press and hold either

side of (SEEK). Release when you have

found the desired point.

Switching to other discs

During playback, press (1) (DISC –) or

(2) (DISC +) button.

The desired disc in the current unit begins

playback.

(1) (DISC –): For preceding discs

(2) (DISC +): For succeeding discs

To locate succeeding tracks

To locate preceding tracks

To search forward

To search backward

Disc number

Track number

SEEK

Playing tracks repeatedly

— Repeat Play

You can select:

•REP-TRACK – to repeat a track.

•REP-DISC – to repeat a disc.

During playback, press (3) (REP)

repeatedly until the desired setting

appears.

REP-TRACK t REP-DISC t REP-OFF

Repeat Play starts.

To return to normal play mode, select “REP-

OFF.”

Playing tracks in random

order — Shuffle Play

You can select:

•SHUF-DISC – to play the tracks on the

current disc in random order.

•SHUF-CHGR – to play the tracks in the

current unit in random order.

•SHUF-ALL* – to play all the tracks in all the

units in random order.

During playback, press (4) (SHUF)

repeatedly until the desired setting

appears.

SHUF-DISC t SHUF-CHGR t SHUF-ALL*

t SHUF-OFF

Shuffle Play starts.

* “SHUF-ALL” is only available when you

connect two or more optional CD/MD units.

To return to normal play mode, select “SHUF-

OFF.”

Cleaning the connectors

The unit may not function properly if the

connectors between the unit and the front

panel are not clean. In order to prevent this,

open the front panel by pressing (RELEASE),

then detach it and clean the connectors with a

cotton swab dipped in alcohol. Do not apply

too much force. Otherwise, the connectors may

be damaged.

Main unit

Back of the front panel

Notes

• For safety, turn off the engine before cleaning

the connectors and remove the key from the

ignition switch.

• Never touch the connectors directly with your

fingers or any metal device.

Fuse (10 A)

Additional

Information

Maintenance

Fuse replacement

When replacing the fuse, be sure to use one

matching the amperage rating stated on the

original fuse. If the fuse blows, check the

power connection and replace the fuse. If the

fuse blows again after replacement, there may

be an internal malfunction. In such a case,

consult your nearest Sony dealer.

Warning

Never use a fuse with an amperage rating

exceeding the one supplied with the unit as

this could damage the unit.

Removing the unit

1 Remove the protection collar.

1 Detach the front panel (page 6).

2 Engage the release keys together

with the protection collar.

3 Pull out the release keys to remove

the protection collar.

2 Remove the unit.

1 Insert both release keys together until

they click.

2 Pull the release keys to unseat the

unit.

3 Slide the unit out of the mounting.

Face the hook

inwards.

Orient the release

key correctly.

Specifications

Cassette player section

Tape track 4-track 2-channel stereo

Wow and flutter 0.13 % (WRMS)

Frequency response 30 – 15,000 Hz

Signal-to-noise ratio 55 dB

Tuner section

Tuning range 87.5 – 108.0 MHz

Aerial terminal External aerial connector

Intermediate frequency 10.7 MHz/450 kHz

Usable sensitivity 9 dBf

Selectivity 75 dB at 400 kHz

Signal-to-noise ratio 67 dB (stereo),

69 dB (mono)

Harmonic distortion at 1 kHz

0.5 % (stereo),

0.3 % (mono)

Separation 35 dB at 1 kHz

Frequency response 30 – 15,000 Hz

MW/SW

Tuning range MW: 531 – 1,602 kHz

SW1: 2,940 – 7,735 kHz

SW2: 9,500 – 18,135 kHz

(except for 10,140 – 11,575

kHz)

Aerial terminal External aerial connector

Intermediate frequency 10.7 MHz/450 kHz

Sensitivity 30 µV

Power amplifier section

Outputs Speaker outputs

(sure seal connectors)

Speaker impedance 4 – 8 ohms

Maximum power output 45 W × 4 (at 4 ohms)

General

Outputs Audio output

Power aerial relay control

lead

Power amplifier control

lead

Inputs BUS control input terminal

BUS audio input terminal

Tone controls Low:

±10 dB at 60 Hz (Xplod)

Mid:

±10 dB at 1 kHz (Xplod)

High:

±10 dB at 10 kHz (Xplod)

Power requirements 12 V DC car battery

(negative earth)

Dimensions Approx. 178 × 50 × 178 mm

(w/h/d)

Mounting dimensions Approx. 182 × 53 × 161 mm

(w/h/d)

Mass Approx. 1.2 kg

Supplied accessories Parts for installation and

connections (1 set)

Front panel case (1)

Optional accessories BUS cable (supplied with

an RCA pin cord)

RC-61 (1 m), RC-62 (2 m)

Optional equipment CD changer (10 discs)

CDX-656X

CD changer (6 discs)

CDX-T69X

MD changer (6 discs)

MDX-66XLP

MG-MS System-up Player

MGS-X1

DVD changer

DVX-100S

Source selector

XA-C30

AUX-IN Selector

XA-300

Design and specifications are subject to change

without notice.

Actual total number: Sony XR-CA360X/CA360 (GB,AR) 3-246-852-32(1)

Troubleshooting guide

The following checklist will help you remedy the problems you may encounter with your unit.

Before going through the checklist below, check the connections and operating procedures.

General

Tape playback

Problem

The sound is distorted.

Cause/Solution

The tape head is contaminated.

t Clean the head with a commercially available dry-type

cleaning cassette.

Radio reception

Problem

Preset tuning is not possible.

Automatic tuning is not

possible.

The stations cannot be

received.

The sound is hampered by

noises.

The “ST” indication flashes.

Cause/Solution

•Store the correct frequency in the memory.

•The broadcast signal is too weak.

t Use manual tuning.

•The local seek mode is set to ON.

t Set the local seek mode to OFF (page 9).

Connect an power aerial control lead (blue) or accessory power

supply lead (red) to the power supply lead of a car’s aerial

booster. (When your car has built-in FM/MW/SW aerial in the

rear/side glass only.)

•Tune in the frequency accurately.

•The broadcast signal is too weak.

t Set to monaural mode (page 9).

Problem

No sound.

The contents of the memory

have been erased.

Indications do not appear

in the display.

Cause/Solution

•Cancel the ATT function (page 10).

•Set the fader control to the center position for 2-speaker

systems.

•Adjust the volume with (+).

•The power cord or battery has been disconnected.

•The RESET button was pressed.

t Store again into the memory.

•Remove the front panel and clean the connectors. See

“Cleaning the connectors” (page 14) for details.

•The clock display disappears if you press (OFF) for 2

seconds.

t Press (OFF) again for 2 seconds to display the clock.

Problem

The sound skips.

Cause/Solution

A dirty or defective disc.

CD/MD playback

Error displays (when an optional CD/MD unit is connected)

The following indications will flash for about 5 seconds, and an alarm sound will be heard.

When an error occurs during playback of a CD or MD, the disc number of the CD or MD does not appear

in the display.

The disc number of the disc causing the error appears in the display.

If the above-mentioned solutions do not help improve the situation, consult your nearest Sony

dealer.

Solution

Insert the disc magazine in the CD/

MD unit.

Insert discs in the CD/MD unit.

Clean or insert the CD correctly.

Insert another MD.

Insert another CD/MD.

Play an MD with tracks recorded on

it.

Press the RESET button of the unit.

Close the lid or insert the MDs

properly.

Wait until the temperature goes

down below 50°C.

Display

NO MAG

NO DISC

ERROR

BLANK

RESET

NOT READY

HI TEMP

Cause

The disc magazine is not inserted in

the CD/MD unit.

No disc is inserted in the CD/MD unit.

A CD is dirty or inserted upside

down.*

An MD does not play because of some

problem.*

A CD/MD cannot play because of

some problem.

No tracks have been recorded on an

MD.*

The CD/MD unit cannot be operated

because of some problem.

The lid of the MD unit is open or MDs

are not inserted properly.

The ambient temperature is more than

50°C.

±∏



     

CD/MD

    

CD/

MD

  

CD  



 

MD

 

CD  MD

  

MD  



 

RESET

    

MD



       





NO MAG

NO DISC

ERROR

BLANK

RESET

NOT READY

HI TEMP



      



CD/MD

      

CD/





CD    

*



    MD  *



   CD MD

  

       

MD*



    CD/MD

 

  

MD   

 

MD 

       



     CD/MD

         ,

     

 

    ,



  

≤

        

      ,       

±

Actual total number: Sony XR-CA360X/CA360 (GB,AR) 3-246-852-32(1)



  



    

 CD/MD

   



 

   

     



•   ATT  

•          

•     (+)

•      

•     RESET

T      

•     

 

” “    

•       (OFF) 

T  (OFF)     

            

    ,    



 



 



  

T           

  



    

   

   

    

 “ST”



•    

•   

T  

•        .ON

T        OFF 

            

           



FM/MW/SW   

•    

•   

T     MONO 

Page is loading ...

Sony XR-CA360 Operating instructions

Brand: Sony

Model: XR-CA360

Category: Car media receivers

Type: Operating instructions

This manual is also suitable for

XR-CA360X

Download PDF

report

Sony XR-CA360 Operating instructions

This manual is also suitable for

Sony XR-CA360 Operating instructions

Related papers

Other documents