Halsey Taylor RWM.G is a water cooler that uses HFC-134A refrigerant. It has a 1-1/4 trap, a 3/8 in. O.D. unplated copper tube, and a 1-1/2' power cord. The unit is designed to be hung from a mounting box and secured in place with fastening clips. The water inlet line should be connected to the trap, and the waste line should be connected to the cooler waste line. The stream height can be adjusted by turning the screw on the regulator. The unit also has a bubbler, condenser, drier, compressor, evaporator, and strainer.
Halsey Taylor RWM.G is a water cooler that uses HFC-134A refrigerant. It has a 1-1/4 trap, a 3/8 in. O.D. unplated copper tube, and a 1-1/2' power cord. The unit is designed to be hung from a mounting box and secured in place with fastening clips. The water inlet line should be connected to the trap, and the waste line should be connected to the cooler waste line. The stream height can be adjusted by turning the screw on the regulator. The unit also has a bubbler, condenser, drier, compressor, evaporator, and strainer.
Halsey Taylor RWM.G is a water cooler that uses HFC-134A refrigerant. It has a 1-1/4 trap, a 3/8 in. O.D. unplated copper tube, and a 1-1/2' power cord. The unit is designed to be hung from a mounting box and secured in place with fastening clips. The water inlet line should be connected to the trap, and the waste line should be connected to the cooler waste line. The stream height can be adjusted by turning the screw on the regulator. The unit also has a bubbler, condenser, drier, compressor, evaporator, and strainer.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI