DF
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EG40.41 Rev. 06/10
Catalog Specification Sheet No.
EG40.41
Spec-Bar 2000
®
Rotary Glasswashers
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Short Form Specifications
Eagle Spec-Bar 2000
®
Rotary Glasswasher by Moyer Diebel,
mode #DF. Heavy duty stainless steel construction. Three
pump injection system allows for separate rinse and sanitizer.
Upper and lower wash and rinse arms, double walled
construction, final cool water rinse, splash shields, and
polypropylene conveyor. Three US gallons initial fill, 3kw
electric tank heat—208/230/60/1. Holds sixty-four 2
1
⁄2˝
glasses, processes 1000 per hour.
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
®
, and Retail Display are divisions of Eagle Group. ©2010 by the Eagle Group
Item No.:
Project No.:
S.I.S. No.:
Spec-Bar 2000
®
Rotary
Glasswasher by Moyer Diebel
Specification Sheet
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
For custom configuration or fabrication needs, contact our SpecFAB
®
Division.
MODELS:
Certifications / Approvals
Options / Accessories
Casters
Drain tray
Waste collector
Quick disconnect package
Wash down hose
Design and Construction Features
• Three pump injection system allows the use of separate
sanitizer and rinse aid.
• Precisely calibrated pumps inject just the right amount of
chemical—no guesswork, no waste.
• Upper and lower wash and rinse arms produce sparkling
clean glasses every time.
• Double walled construction for quieter operation.
• Final cool water rinse provides a cool glass ready for
immediate use.
• Splash shields for splashover protection.
• Off-the-floor shelf provides storage for three 1-gallon
containers.
• Polypropylene conveyor virtually eliminates chipping of fine
stemware.
• Conveyor movement: clockwise rotation.
• Capacity: Holds sixty-four 2
1
⁄2˝ (64mm) glasses and
processes 1000 per hour.
• Water consumption: 2.8 US gpm cold water, 3 US gallons
hot water (initial fill), maximum consumption approximately
10 US gph.
• Hot water inlet: 140-160˚F (61-69˚C),
1
⁄2˝ (13mm) IPS, flow
pressure 25-95 psi (172.5-656 kPa).
• Cold Water inlet: 75˚F (24˚C),
1
⁄2˝ (13mm) IPS, flow pressure
25-95 psi (172.5-656 kPa).
• Drain: 1
1
⁄2˝ (38mm) tailpiece, connect to drain size according
to local plumbing code.
• Heating: 3 kw electric tank heat.
• Electric: 208-230/60/1, 15-amp. Supplied with 6˝ (1829mm)
plug-in cord.
• Front access door with pull handle.