Edlund FFD--WMB Datasheet

Type
Datasheet

This manual is also suitable for

Our new Heavy Duty Film and Foil Dispenser replaces those flimsy cardboard cartons that hold rolls of film and foil, and those plastic
dispensers that don't work so well when the roll is near the end. Edlund's FFD-18 is a sturdy stainless steel dispenser with suction cup
feet that hold it securely in position or you can mount it on the wall and save precious counter space. Welded handles make it easy to
carry when loaded with a full roll, and the adjustable dispensing tube fits both 12" and 18" rolls. Whether you're using the slide cutter
for film or the interchangeable metal cutter for foil, you get a clean cut that eliminates waste and saves you money! Don't let inferior
dispensers foil your profit plans. Edlund is a cut above.
FFD-18 Film and Foil Dispenser
Edlund Company LLC, 159 Industrial Parkway, Burlington, VT 05401, USA 800-772-2126 www.edlundco.com
We’re in your kitchen.
WARRANTY INFORMATION: THE EDLUND COMPANY WARRANTS THESE PRODUCTS TO BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE YEAR FROM DATE OF PURCHASE. THE COMPANY’S OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING WITHOUT CHARGE ANY PART OR PARTS FOUND TO BE DEFECTIVE
UNDER NORMAL USE. IT IS THE RESPONSIBILITY OF THE PURCHASER TO RETURN THE ENTIRE UNIT TO THE FACTORY, TRANSPORTATION CHARGES PREPAID. THIS WARRANTY DOES NOT COVER PARTS THAT MUST BE REPLACED UNDER NORMAL USE, INCLUDING KNIVES AND DRIVE GEARS ON CAN OPENERS. NO OTHER WARRANTY, WRITTEN OR VERBAL, IS AUTHORIZED
BY THE COMPANY. WARRANTY INFORMATION OUTSIDE THE UNITED STATES MAY VARY, CONSULT YOUR DISTRIBUTOR.
06/11 EDL-1012
Foil dispenser with metal cutting edge
SANITARY AND PROFESSIONAL
• Heavy duty stainless steel construction
• NSF Certified
• Dispenses and cuts clean both 12" and 18" film and foil
• Optional wall mounting bracket available
• Interchangeable foil and film cutters included
• Made in the U.S.A.
Film dispenser with slide cutter
SPECIFICATIONS:
MODEL # DESCRIPTION PRODUCT CODE CASE CUBE FT
3
/M
3
MASTER CASE CASE WEIGHT LBS./KG
FFD-18 12” & 18” Foil & Film Dispenser 79500 1/.03 1 9.5/4.25
FFD--WMB Wall Mounting Bracket A1060
12” Foil roll shown
12” Film roll shown
  • Page 1 1

Edlund FFD--WMB Datasheet

Type
Datasheet
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI