Harbor Freight Tools 93787 User manual

Mounting Base

Model 93787

OPERATING INSTRUCTIONS

Due to continuing improvements, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at: http://www.harborfreight.com

2005 by Harbor Freight Tools

artwork contained herein may be reproduced in any shape or form without the express written consent of

Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.

WARNING!

1. Always wear ANSI approved safety goggles and gloves when installing and using

this product. 2. Read and adhere to all warnings and safety precautions in the

owner’s manual for this product and SKU 91510 BEFORE use.

For SKU # 91510

The Mounting Base attaches to a bench top or table (capable of supporting the weight of the Mounting

Base and workpieces) using bolts or screws (not provided). The Deep Throat Hand Punch (SKU 91510)

slides over the pin in the base as shown in Fig. 2. Secure the Hand Punch by tightening the two screws

(2) shown in Fig.1 evenly. Periodically check all hardware for tightness.

Fig.1

traPnoitpircseDyt'Q

1ylbmessAniPleetSdnaesaBmunimulA1

2tloBdaeHerauqS2

Fig. 2