4FT/5FT/6FT 3 POINT ROTARY CUT MOWER
USER’S MANUAL
Read carefully and understand RULES FOR SAFE OPERATION and instructions before
operating. Failure to follow the safety rules and other basic safety precautions may result in
serious personal injury.
Item # 180250
,
180251
,
180252
For technical questions and replacement parts, please call 1-800-222-5381.
Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO.,
INC., Product! For future reference, please complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the
entire manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. Northern Tool +
Equipment strongly recommends this machine is not modified and/or used for
any application other than that for which it was designed. If you have any
questions relative to a particular application, DO NOT use the machine until you
have first contacted Northern Tool + Equipment to determine if it can or should be
performed on the product.
Technical Specifications
Specification Item#180250 Item#180251 Item#180252
Recommended tractor 22-50hp. 22-50hp. 30-80hp
Cutting width 45 "(1150 mm) 57 "(1450 mm) 69 "(1750 mm)
Overall width 50"(1270 mm) 61"(1560 mm) 73"(1870 mm)
Cutting height 1-1/2" -10" 1-1/2" -10" 1-1/2" -10"
P.T.O. Speed 540 RPM 540 RPM 540 RPM
Blade Tip Speed 12,142 ft/min 12,142 ft/min 12,142 ft/min
Blades 18-3/4" x .475" x2pcs 24" x .475" x2pcs 30-1/2" x .475" x2pcs
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and
assembly diagram. Keep this manual and invoice in a safe and dry place for
future reference.
Northern Tool + Equipment Co.,
2800 Southcross Drive West
P.O. Box 1499 Burnsville, MN 5337-0499
Made in China
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
