- 5 -
5. Starting Up the Device
Inserting the light bulb
Warning!:
• Always use a bulb of max. 60 W and
E27 thread.
• Before inserting or replacing the
lightbulb:
- Switch off the table lamp,
- pull out the plug from the power
socket and
- let the table lamp cool down
completely.
➭ Screw the fastening ring off the
lamp socket .
➭ Place the lamp shade with the
small opening facing down onto the
lamp socket .
➭ Screw the fastening ring back
onto the lamp socket until the
lamp shade is firmly in place.
➭ Carefully screw the light bulb into
the lamp socket. Make sure it is
correctly screwed in.
The light bulb is not included in the
package contents.
Setting up and switching on
➭ Place the table lamp on an even
surface.Keep illuminated objects
at a minimum distance of 0.5 m.
➭ Push the power plug into the power
socket.
➭ Switch the table lamp on and off
by means of the cord switch.
6. Cleaning and care
Danger!
• Before cleaning the table lamp:
- Switch off the table lamp,
- pull out the plug from the power
socket and
- let the table lamp cool down
completely.
• Never immerse the appliance in water
or other liquids while cleaning.
➭ Clean the desk lamp with a dry,
fluff-free cloth.
• Never use solvents for cleaning, to
avoid damage to the tabel lamp.
7. Disposal
Never dispose off the table lamp with
normal household waste. Contact your
local town council or regional authority
for information about how to dispose
of the appliance in an appropriate,
environmentally-friendly manner.
Warning!
Before disposing of the appliance,
you can prevent accidents to children
by detaching the power plug, thus
rendering it unusable.
8. Service
Kompernass Service United Kingdom
Alpine House, Premier Business Park
Long Street, Walsall
West Midlands, WS2 9DY
Tel.:08707/876177
Fax:01922/725417
KH 4063 / 4069 / 4070