American DJ FS-1000 User manual

Type
User manual

This manual is also suitable for

American DJ FS-1000/HTI is a professional followspot with a bright 150W discharge lamp that provides precise, full focusing. It features dual focusing knobs, an iris control knob for blackouts, a handle, a gel frame, and a hanging bracket. The optional ADJ FS-6C color changer adapter allows for convenient access to four color gels or mixing between them. The FS-1000/HTI is made of extruded aluminum casing and can be hung or set on a tripod. It has a warm-up time of 5 minutes and is suitable for any working position.

American DJ FS-1000/HTI is a professional followspot with a bright 150W discharge lamp that provides precise, full focusing. It features dual focusing knobs, an iris control knob for blackouts, a handle, a gel frame, and a hanging bracket. The optional ADJ FS-6C color changer adapter allows for convenient access to four color gels or mixing between them. The FS-1000/HTI is made of extruded aluminum casing and can be hung or set on a tripod. It has a warm-up time of 5 minutes and is suitable for any working position.

American DJ
®
LOS ANGELES, CA. 90058 USA
Model: FS-1000/HTI
SPECIFICATIONS:
Lamp: ZB-HTI152, 150W discharge
Power: 110V/60Hz
Fuse : 6A GMA
Ventilation: Fan Cooling
Working Position: Any
Weight: 24 lbs.
Size: 9” x 9” x 21”
Warm-up time: 5 minutes
DISCHARGE LAMP WARNING!
This fixture is fitted with discharge lamps
which are highly susceptible to damage if
improperly handled. Never touch lamp
with bare fingers as the oil from your
hands will shorten lamp life. Also, never
move fixture until lamp has had ample
time to cool. Remember, lamps are not
covered under warranty conditions.
Thank you for purchasing this
American DJ® product. For your
convenience this lighting effect has
been lamped and is ready to be used,
there is no assembly required. Please
read the following instructions before
installing or using your new unit.
Operating Instructions:
Unit is made of extruded aluminum casing, and is
ready to be hung or set on a Tripod. After turning
on, give the discharge lamp 5 minutes to warm-up
to full brightness. The FS-1000/HTI™ features a
bright ZB-HTI150, 150W discharge lamp , dual
focusing knobs for precise, full focusing, iris control
knob at top of unit can also blackout, handle, gel
frame, and a hanging bracket. Optional LTS-5 tri-
pod stand comes w/ FS-1000/HTI/Sys system only.
The ADJ FS-6C, color changer adapter, which fits
on the front of the FS-1000/HTI™, gives the user
convenient access to four color gels or to mix col-
ors between the four (FS-6C & Color gels sold sep-
arately).
To replace lamp; unscrew screws on the back
of the unit, pull out module, replace bulb and
reassemble. Do not forget to unplug unit before
replacing bulb!
Fuse is located underneath mains input
For service, contact your American DJ® dealer.
Caution! Always disconnect from main
power before replacing lamps or servicing unit.
Remember to always replace with same lamps
and fuses.
American DJ
®
User Instructions
P
RO
F
OLLOWSPOT
FS-1000/HTI
American DJ
®
LOS ANGELES, CA. 90058 USA
Model: FS-1000/HTI
SPECIFICATIONS:
Lamp: ZB-HTI150, 150W discharge
Power: 220V
Fuse : 3A GMA
Ventilation: Fan Cooling
Working Position: Any
Weight: 24 lbs.
Size: 9” x 9” x 21”
Warm-up time: 5 minutes
DISCHARGE LAMP WARNING!
This fixture is fitted with discharge lamps
which are highly susceptible to damage if
improperly handled. Never touch lamp
with bare fingers as the oil from your
hands will shorten lamp life. Also, never
move fixture until lamp has had ample
time to cool. Remember, lamps are not
covered under warranty conditions.
Thank you for purchasing this
American DJ® product. For your
convenience this lighting effect has
been lamped and is ready to be used,
there is no assembly required. Please
read the following instructions before
installing or using your new unit.
Operating Instructions:
Unit is made of extruded aluminum casing, and is
ready to be hung or set on a Tripod. After turning
on, give the discharge lamp 5 minutes to warm-up
to full brightness. The FS-1000/HTI™ features a
bright ZB-HTI150, 150W discharge lamp , dual
focusing knobs for precise, full focusing, iris control
knob at top of unit can also blackout, handle, gel
frame, and a hanging bracket. Optional LTS-5 tri-
pod stand comes w/ FS-1000/HTI/Sys system only.
The ADJ FS-6C, color changer adapter, which fits
on the front of the FS-1000/HTI™, gives the user
convenient access to four color gels or to mix col-
ors between the four (FS-6C & Color gels sold sep-
arately).
To replace lamp; unscrew screws on the back
of the unit, pull out module, replace bulb and
reassemble. Do not forget to unplug unit before
replacing bulb!
Fuse is located underneath mains input
For service, contact your American DJ® dealer.
Caution! Always disconnect from main
power before replacing lamps or servicing unit.
Remember to always replace with same lamps
and fuses.
American DJ
®
User Instructions
P
RO
F
OLLOWSPOT
FS-1000/HTI
220V OPERATION INSTRUCTIONS
  • Page 1 1
  • Page 2 2

American DJ FS-1000 User manual

Type
User manual
This manual is also suitable for

American DJ FS-1000/HTI is a professional followspot with a bright 150W discharge lamp that provides precise, full focusing. It features dual focusing knobs, an iris control knob for blackouts, a handle, a gel frame, and a hanging bracket. The optional ADJ FS-6C color changer adapter allows for convenient access to four color gels or mixing between them. The FS-1000/HTI is made of extruded aluminum casing and can be hung or set on a tripod. It has a warm-up time of 5 minutes and is suitable for any working position.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI