2. The Forever Cap
  3. FCOD1313

The Forever Cap FCOD1313, FCOD88 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the The Forever Cap FCOD1313 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
First– Measure the opening of your chimney’s clean
out opening.
Second– Remove the door from the frame by sliding
it up.
Three– Slide the frame into the opening. Adjust the
tabs, so the they
fit tightly against the inside sides of the chimney.
Four– Remove the frame from the opening.
Five– Using RTV silicone adhesive chalking. Apply
the chalking on both the backside of the frame
and the face of the chimney around the opening.
Six- Slide the frame back into the opening. Using
duck tape. Tape the frame to the chimney, to hold it in
place while it dries. Wait at least 24 hours before
removing the tape and reinstalling the door.
/