Barska AF11604 Owner's manual

Brand: Barska

Model: AF11604

Type: Owner's manual

| La Verne, CA 91750 | USA | www.ba rs k a. c om

BC171

12/10

Vertical Cut-Out

The Pistol Grip Ball Head also comes with a Vertical Cut-Out (G) for 360 degree

photography. To use this feature, simply squeeze the trigger and rotate the Pistol Grip

Ball Head until you feel the ball head begin to move downward. You may now use the

Pistol Grip Ball Head at any angle. You can even shoot straight down.

Pistol Grip Head System

Parts of The Pistol Grip Head System

A. Quick Release Leg Lock Lever

B. Quick Release Plate

C. Mounting Screw

D. Leveler

E. Trigger Control Lock

F. Quick Release Locking Lever

G. Vertical Cut Out

H. Threaded Screw

Specifications

Ball diameter

Height

Weight

Max load

1.77 inches

4.92 inches

1.21 lb

3.3 lb

Mounting the Head

Located under the Pistol Grip Head System is the mounting socket where it can be

screwed on to the platform of an adaptable bipod or monopod.

This Pistol Grip Head System fits onto standard tripods of both 1/4 and 3/8 inch

threads. To change the thread size remove the Threaded Screw (H) which is located

under the base of the Pistol Grip Head System by using your finger and gently push

down and to the right to remove screw. Place the Threaded Screw in a safe place.

Quick Release Plate

1. Hold open the Quick Release Leg Lock Lever (A) outward until it stops and remove

the Quick Release Plate (B) by lifting upward.

2. Position the plate so that the Mounting Screw (C) aligns with the tripod socket on the

camera or camcorder and screw into place.

3. Hold open the Quick Release Lock Lever (A) outward and with the camera tilted

slightly down, slide the Quick Release Plate (B) back into position. Secure the

platform using the Quick Release Locking Lever (F) by pressing firmly until it stops.

Using the Pistol Grip Ball Head

For movement in any direction, simply loosen the Pistol Grip Ball Head, by squeezing

the Trigger Control Lock (E). When you have reached your desired position, simply

release the trigger lock and the Pistol Grip Ball Head will lock into place.

Barska AF11604 Owner's manual

Barska AF11604 Owner's manual

Barska AF11604 Owner's manual

Related papers

Other documents