Metropolitan N6889-293 User manual

Metropolitan
Brand
Metropolitan
Model
N6889-293
Type
User manual

Metropolitan N6889-293 is a 9-light indoor chandelier with a transitional style that can elevate the ambiance of any room. Here are some of its key features and possible use cases:

  • Adjustable height: The chain length can be customized to achieve the desired hanging height, making it suitable for rooms with various ceiling heights.

  • Multiple light sources: With nine candle-style light sockets, this chandelier provides ample illumination, ideal for large spaces like living rooms, dining rooms, or foyers.

  • Easy installation: The fixture includes all necessary mounting hardware for straightforward installation, ensuring a secure and stable connection to the ceiling.

Metropolitan N6889-293 is a 9-light indoor chandelier with a transitional style that can elevate the ambiance of any room. Here are some of its key features and possible use cases:

  • Adjustable height: The chain length can be customized to achieve the desired hanging height, making it suitable for rooms with various ceiling heights.

  • Multiple light sources: With nine candle-style light sockets, this chandelier provides ample illumination, ideal for large spaces like living rooms, dining rooms, or foyers.

  • Easy installation: The fixture includes all necessary mounting hardware for straightforward installation, ensuring a secure and stable connection to the ceiling.

INSTALLATION INSTRUCTIONS
Item#N6889-293 (New. 2017/04/27)
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
Fig. 2
Fig. 3
LA-2731E
Notice: It is important to use proper chain pliers (not included)
To OPEN and CLOSE the chain included with this fixture. Do
not open them with other tools that may twist or stress the
chain links. It is important to use proper chain pliers like the
ones shown in the diagram.
ASSEMBLING THE FIXTURE (Fig. 1)
1. Shut off the power at the fuse box or circuit breaker. If necessary,
remove the old fixture including the mounting hardware.
2. Carefully remove the new fixture from the carton and check that
all parts are included as shown in the illustration.
3. Use short hanger rods (H) to connect small metal frame (G) with
big metal frame (F).
4. Use long hanger rods (B) to connect loop assembly (A) with big
metal frame (F).
MOUNTING THE FIXTURE (Fig. 2)
5. Secure the nipple into the ceiling loop until snug.
6. Secure the other end of the nipple with the ceiling loop attached
to the crossbar until snug.
7. Place the lock washer and hex nut over the end of the nipple
protruding through the crossbar. Then thread the hex nut until
tight.
8. Take the crossbar assembly and mount it to the ceiling outlet box
with the mounting screws (Size: #8-32N*L0.5”). The side of the
crossbar marked “GND” must face out
9. Attach the quick link to the fixture loop. Quick link must be
completely closed when installed.
10. By measuring, determine the correct number of links needed for
the desired hanging height. Use a pair of chain pliers to open one
end link of the chain and discard the excess chain.
11. Slip the lock collar and canopy over the chain. Attach a quick link
to the other end link of the chain. Then raise the fixture and attach
the quick link to the ceiling loop. Close the quick link.
12. Carefully lace the fixture wires through the chain links and pull
until tight. Then feed the wires through the lock collar, canopy,
ceiling loop and the nipple and pull until tight.
CONNECTING THE WIRE (Fig. 3)
13. At this point, connect the electrical wire as shown in figure 3,
making sure that all wire connectors are secured. If your outlet
has a ground wire (green or bare copper), connect the fixture’s
ground wire to it. Otherwise, connect the fixture’s ground wire
directly to the crossbar using the Green Screw provided.
14. Tuck these wire connections neatly into the ceiling outlet box, and
raise the canopy all the way to the ceiling. Raise the lock collar
and thread onto the ceiling loop protruding through the canopy.
FINISHING THE INSTALLATION (Fig.1)
15. Place the candle cover (D) over the socket (E) of the metal frame
(F) (G).
16. Install the light bulb(s) (C) (not included) in accordance with the
fixture’s specifications. (DO NOT EXCEED THE MAXIMUM
WATTAGE RATING!). (NE PAS DEPASSER LA PUISSANCE
NOMINALE MAXIMALE!)
Your installation is now complete. Return power to the outlet box and
test the fixture.
Note: Illustration (Fig. 1) on this manual is for installation
purposes only. It may or may not be identical to the fixture
purchased
FIXTURE
WIRES
Black or
Smooth
H
O
U
S
E
WIRES
Black
(Hot)
FIXTURE
WIRES
White or
Ribbed
H
O
U
S
E
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
H
O
U
S
E
WIRES
Green
(Ground)
Fig.1
Set# A-012
-Crossbar
-Ground Screw
-Mounting Screw*2
I
Candle Cover#
D
C
E
B
H
G
A
F
Chain#HCH4072-293
Ceiling loop
Lock Collar
Chain (End link)
Quick Link
Fixture Loop
Quick Link
Chain (End link)
Nipple
Hex Nut
Cross Bar
Mounting Screws
Outlet Box (Ceiling)
Lock Washer
Canopy
  • Page 1 1

Metropolitan N6889-293 User manual

Metropolitan
Brand
Metropolitan
Model
N6889-293
Type
User manual

Metropolitan N6889-293 is a 9-light indoor chandelier with a transitional style that can elevate the ambiance of any room. Here are some of its key features and possible use cases:

  • Adjustable height: The chain length can be customized to achieve the desired hanging height, making it suitable for rooms with various ceiling heights.

  • Multiple light sources: With nine candle-style light sockets, this chandelier provides ample illumination, ideal for large spaces like living rooms, dining rooms, or foyers.

  • Easy installation: The fixture includes all necessary mounting hardware for straightforward installation, ensuring a secure and stable connection to the ceiling.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents