Sauter GmbH
Tieringerstr. 11-15 Tel: +49-[0]7433- 9976-174
D-72336 Balingen
E-Mail: [email protected]
Fax: +49-[0]7433-9976-285
Internet: www. sauter.eu
Instruction Manual
TVP
TVP-BA-e-1110 1
Thank you for buying a SAUTER test stand. We hope you
are pleased with your high quality test stand with its big
functional range. If you have any queries, wishes or helpful
suggestions, do not hesitate to call our service number.
1. Included in delivery
- SAUTER TVP
- Various hooks
2. Warning
Intended use
The instrument you have acquired serves to determine the
measuring value of the material to be measured. It is
intended to be used as a “non-automatic“ instrument, i.e.
the material to be measured is manually and carefully
attached at the instrument. The measuring value can be
read off after a stable measuring value has been obtained.
Be careful about the limit load of test stand and force
gauge. Do not go over the maximum force.
3. Technical Specifications
Capacity: up to 500 Newton
Unit net weight: 10,5 kg
Minimum height above base plate: 115 mm
Maximum height above base plate: 318 mm
height : 420 mm / Length: 233 mm /depth : 150 mm
base plate
^
4. Adaption der Messinstrumente
By means of 4 M3 screws
Sauter GmbH
Tieringerstr. 11-15 Tel: +49-[0]7433- 9976-174
D-72336 Balingen
E-Mail: [email protected]
Fax: +49-[0]7433-9976-285
Internet: www. sauter.eu
Instruction Manual
TVP
TVP-BA-e-1110 2
5. Drawing
dimensions in milimetres (mm)
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
KERN LA 300-2H Operating instructions
-
Interlogix TVP-WMB TruVision PTZ Wall Mount Installation guide
-
Trendnet TVP-SP2 Installation guide
-
Trendnet TVP-221H User manual
-
-
-
-