1
www.gateway.com
Setting Up Your Gateway 610
Wireless Keyboard and Mouse
Use the following instructions to set up your wireless keyboard and mouse.
To set up your wireless keyboard and mouse:
1 Install the batteries in your wireless keyboard and mouse.
2 Plug in your Gateway 610 computer and turn it on.
3 Press and hold the connect button on the computer for about 3 seconds.
2
www.gateway.com
4 Press and hold the connect button on the keyboard for about 3 seconds.
5 Press and hold the connect button on the computer for about 3 seconds.
6 Press and hold the connect button on the mouse for about 3 seconds.
MAN SYS GW610 MRPC R0 11/03
-
1
-
2
Gateway 610 Setting Up
- Type
- Setting Up
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI