Generac 15kW RD01523ADAE User manual

Brand: Generac

Model: 15kW RD01523ADAE

Type: User manual

Generac 15kW RD01523ADAE is a powerful and versatile generator designed to provide backup power during power outages. With its robust engine and durable construction, this generator can handle a variety of applications, including powering essential appliances, tools, and equipment. It features a user-friendly control panel with a digital display, making it easy to monitor and adjust settings. The Generac 15kW RD01523ADAE is also equipped with a variety of safety features, including automatic voltage regulation and low oil shutdown, ensuring reliable and safe operation.

4 3 2 1

4 3 1

2424 [95.4] OVERALL LENGTH

182

[7.2]

1449

[57.0]

OVERALL

HEIGHT

888 [35.0]

OVERALL WIDTH

758 [29.8]

DOOR TYP

173 [6.8]

618 [24.3]

998 [39.3]

CENTER OF GRAVITY

SEE NOTE 5

1625 [64.0]

343

[13.5]

TITLE

INSTALL CPL PROT D3.4L EXT

ISSUE DATE:

SIZE CAGE NO DWG NO

0K6968

REV

SCALE

0.050

WT-KG SEE ABOVESHEET

1 of 2

GENERAC POWER SYSTEMS OWNS THE COPYRIGHT OF THIS DRAWING

WHICH IS SUPPLIED IN CONFIDENCE AND MUST NOT BE USED FOR

ANY PURPOSE OTHER THAN FOR WHICH IT IS SUPPLIED WITHOUT

THE EXPRESS WRITTEN CONSENT OF GENERAC POWER SYSTEMS.

c GENERAC POWER SYSTEMS 2013

ELECTRONICALLY APPROVED

INSIDE WINDCHILL

DRAWING CREATED FROM PRO/ENGINEER

3D FILE. ECO MODIFICATION TO BE

APPLIED TO SOLID MODEL ONLY.

1/2

REV

WINDCHILL VERSION

A.1

SERVICE ITEM 3.4L

OIL FILL CAP RIGHT SIDE

OIL DIP STICK RIGHT SIDE

OIL FILTER RIGHT SIDE

OIL DRAIN HOSE RIGHT SIDE

RADIATOR DRAIN HOSE LEFT SIDE

AIR CLEANER ELEMENT RIGHT SIDE

MUFFLER FRONT

FAN BELT EITHER SIDE

BATTERY LEFT SIDE

WEIGHT DATA WITH EMPTY BASETANK

(SEE NOTE 5)

GENERATOR AS SHOWN (STEEL ENCL)

997 [2197]

WITH WOODEN SHIPPING SKID

1042 [2297]

REFERENCE OWNERS MANUAL FOR PERIODIC

REPLACEMENT PART LISTINGS.

NOTES:

1. MINIMUM RECOMMENDED CONCRETE PAD SIZE: 1194 (47") WIDE X 2718

(107") LONG. REFERENCE INSTALLATION GUIDE SUPPLIED WITH UNIT

FOR CONCRETE PAD GUIDELINES

2. ALLOW SUFFICIENT ROOM ON ALL SIDES OF THE GENERATOR FOR MAINTENANCE

AND SERVICING. THIS UNIT MUST BE INSTALLED IN ACCORDANCE WITH CURRENT

APPLICABLE NFPA 37 AND NFPA 70 STANDARDS AS WELL AS ANY OTHER FEDERAL,

STATE AND LOCAL CODES.

3. CONTROL PANEL / CIRCUIT BREAKER INFORMATION:

- SEE SPECIFICATION SHEET OR OWNERS MANUAL

- ACCESSIBLE THROUGH CUSTOMER ACCESS ASSEMBLY DOOR ON REAR OF

GENERATOR

4. REMOVE THE REAR TANK AND REAR ENCLOSRE COVER PANEL TO ACCESS

THE STUB-UP AREAS AS FOLLOWS:

- HIGH VOLTAGE CONNECTION INCLUDING AC LOAD LEAD CONDUIT CONNECTION

NEUTRAL CONNECTION, BATTERY CHARGER 120 VOLT AC (0.5 AMP MAX) CONNECTION.

- LOW VOLTAGE CONNECTIONS INCLUDING TRANSFER SWITCH CONTROL WIRES

5. CENTER OF GRAVITY AND WEIGHT MAY CHANGE DUE TO UNIT OPTIONS.

6. ENGINE SERVICE CONNECTIONS

OIL DRAIN: 3/8" NPT

EXHAUST OUTLET: 2" O.D.

7. BOTTOM OF GENERATOR SET MUST BE ENCLOSED TO PREVENT PEST INTRUSION AND

RECIRCULATION OF DISCHARGE AIR AND/OR IMPROPER COOLING AIR FLOW.

8. EXHAUST SYSTEM MAXIMUM BACK PRESSURE: 35 INCHES H2O.

9. REFERENCE OWNERS MANUAL FOR LIFTING WARNINGS.

10. MOUNTING BOLTS OR STUDS TO CONCRETE PAD SHALL BE 5/8-11 GRADE 5

(USE STANDARD SAE TORQUE SPECS)

RIGHT SIDE VIEW

REAR VIEW

LEFT SIDE VIEW

RADIATOR/EXHAUST

DISCHARGE AIR

LIFT-OFF DOOR PROVIDES ACCESS TO:

FUEL FILL, FUEL LEVEL GAUGE,

NORMAL VENT, INNER TANK

EMERGENCY VENT, OUTER TANK

EMERGENCY VENT, OPTIONAL

90% ALARM ASSEMBLY,

OPTIONAL 5 GALLON SPILL

BOX

OPEN PUNCHED LOUVERS TYPICAL

ON BOTH SIDES OF

FUEL TANK VENTILATION

DUCT TO PROVIDE ADEQUATE

CROSS-FLOW OF AIR VENTILATION

EXHAUST MUFFLER ENCLOSED WITHIN

GENERATOR ENCLOSURE

REAR TANK COVER

SEE NOTE 4

CUSTOMER ACCESS

ASSEMBLY, CONTROL PANEL

ACCESS, BATTERY CHARGER

LOCATED WITHIN

SEE NOTE 4

CIRCUIT BREAKER

SEE NOTE 3

REAR ENCLOSURE COVER

PANEL

SEE NOTE 4

FUEL TANK

VENTILATION DUCT

LIFTING PROVISIONS (4 PLACES)

SEE NOTES 5, 9, AND CENTER

OF GRAVITY DIMENSIONS

VICE ACTION LATCH,

ONE PER DOOR, LIFT-OFF

DOORS ON FRONT, RIGHT, AND LEFT SIDES

TOP VIEW

RADIATOR/EXHAUST

DISCHARGE AIR

(BOTH SIDES)

AIR INTAKE

(BOTH SIDES)

INTERNAL DIVIDER PANEL

SEPARATES FUEL TANK VENTILATION

DUCT FROM THE ENGINE,

ALTERNATOR AND EXHAUST SYSTEM

REMOVE PANEL TO

ALLOW TANK VENTS

TO TERMINATE OUTSIDE

OF THE GENERATOR

ENCLOSURE (CHECK LOCAL

AND STATE CODE FOR

APPLICABILITY)

4 3 2 1

4 3 1

660 [26.0]

101 [4.0]

351 [13.8]

2226 [87.6]

121 [4.8]

196 [7.7]

STUB-UP

AREA

786 [30.9]

STUB-UP

AREA

[2.0]

[1.5]

125

[4.9]

110 [4.3] TYP

690 [27.2] TYP

1216 [47.9] TYP

1769 [69.6] TYP

2322 [91.4] TYP

394 [15.5]

888 [35.0]

[.7]

851 [33.5] TYP

DRAWING CREATED FROM PRO/ENGINEER

3D FILE. ECO MODIFICATION TO BE

APPLIED TO SOLID MODEL ONLY.

TITLE

INSTALL CPL PROT D3.4L EXT

ISSUE DATE:

SIZE CAGE NO DWG NO

0K6968

REV

SCALE

0.075

WT-KG SEE ABOVESHEET

2 of 2

GENERAC POWER SYSTEMS OWNS THE COPYRIGHT OF THIS DRAWING

WHICH IS SUPPLIED IN CONFIDENCE AND MUST NOT BE USED FOR

ANY PURPOSE OTHER THAN FOR WHICH IT IS SUPPLIED WITHOUT

THE EXPRESS WRITTEN CONSENT OF GENERAC POWER SYSTEMS.

c GENERAC POWER SYSTEMS 2013

ELECTRONICALLY APPROVED

INSIDE WINDCHILL

2/2

REV

WINDCHILL VERSION

A.1

FUEL TANK

TOTAL CAPACITY 233 [61]

USABLE CAPACITY 209 [55]

DIMENSIONS:

CAPACITY:

LITER [GALLONS]

MM [INCH]

THIS TANK IS LISTED TO UL142 AND ULC/ORD C142.18

REMOVABLE

STUB-UP COVER

OUTER TANK EMERGENCY VENT

(2" NPT FEMALE)

INNER TANK NORMAL VENT

(2" NPT FEMALE)

INNER TANK EMERGENCY VENT

(2" NPT FEMALE)

FUEL LEVEL

GAUGE/SENDER

FUEL FILL

(2" NPT FEMALE)

FUEL RETURN

FUEL SUPPLY

CIRCUIT BREAKER,

NEUTRAL AND CUSTOMER

CONNECTION OPENING

HIGH AND LOW VOLTAGE

STUB-UP AREA

OUTER TANK LEAK DETECTOR

CUSTOMER OPTION

(2" FEMALE NPT)

16.7 [.66] MOUNTING HOLES

(10 PLACES)

Generac 15kW RD01523ADAE User manual