Reactor™ 40 Kicker Yamaha™ EFI 20-25
Adapter Kit
Installation Examples
You can use these photographic examples to help when following the
instructions included with your Reactor 40 Kicker corepack and Yamaha EFI
20-25 adapter kit.
Steering Actuator Installation Examples
Installing the Motor Bracket Between the Motor and the Tiller Handle
Motor Bracket Installed on the Motor
Complete Steering Actuator Installation
Throttle Actuator Installation Examples
Complete Throttle Actuator Installation
Closeup of Throttle Lever Installed on Yamaha Throttle Shaft
NOTE: You must use extreme care when removing the nut ➊➊ on the bottom
of the throttle control wheel and spring. If the spring drops down and falls off of
the throttle shaft, it can unwind and may be difcult to reinstall.
April 2020 190-02451-21_0A Printed in Taiwan
© 2020 Garmin Ltd. or its subsidiaries