Garmin Piloto automatico kicker Reactor 40 Installation guide

Reactor™ 40 Kicker Yamaha™ EFI 20-25

Adapter Kit

Installation Examples

You can use these photographic examples to help when following the

instructions included with your Reactor 40 Kicker corepack and Yamaha EFI

20-25 adapter kit.

Steering Actuator Installation Examples

Installing the Motor Bracket Between the Motor and the Tiller Handle

Motor Bracket Installed on the Motor

Complete Steering Actuator Installation

Throttle Actuator Installation Examples

Complete Throttle Actuator Installation

Closeup of Throttle Lever Installed on Yamaha Throttle Shaft

NOTE: You must use extreme care when removing the nut ➊➊ on the bottom

of the throttle control wheel and spring. If the spring drops down and falls off of

the throttle shaft, it can unwind and may be difcult to reinstall.

April 2020 190-02451-21_0A Printed in Taiwan