CURT 13113 Installation guide

Type
Installation guide

This manual is also suitable for

Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
HHCS,M10x1.25,35,CL10.9,YZ
10-10298
7
1
WASHER, S-CON,7/16,YZ
30-00163
7
2
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 877-287-8634
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
3,500 350
5,000
500
MITSUBISHI ENDEAVOR
6/26/2020
13113
60
29
30
HITCH WEIGHT: LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
75214
EXISTING WELD NUTS (BOTH SIDES)
PASSENGER SIDE FRAME RAIL
DRIVER SIDE FRAME RAIL
1
2
- NO DRILLING REQUIRED
- LOWER EXHAUST REQUIRED
1) Temporarily lower muffler by removing rear rubber hanger.
2) Place hitch into position. Fit to inside and bottom of frame rails, one side at a time. Align
hitch with M10 weldnut in frame. (Note: Driver side should be positioned first.)
3) Install M10 fasteners - seven locations.
4) Torque all M10 fasteners to 48 lb.-ft. Re-attach rubber exhaust hanger.
1 GENERIC INSTRUCTION SHEET 7/23/2007 DWS
2
UPDATED TEMPLATE
9/4/2009 CFM
3
REMOVED ZSHIP 109 3/28/2011 LPW
4
CHG TO GRADE 8 TORQUE SPECS
7/18/2012
AJP
REVISION HISTORY
REV DESCRIPTION DATE APPROVED
  • Page 1 1

CURT 13113 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI