Haier LE42U6500A Owner's manual

Haier
Brand
Haier
Model
LE42U6500A
Category
LCD TVs
Type
Owner's manual

This manual is also suitable for

LED LCD TV
OWNER' S MANUAL
MODEL: L E 4 2 U 6 5 0 0 A
Please READ this manual carefully
before operating your TV, and retain
it for future reference
Contents
-1-
1、 Safety and warnings..........................................................................................................2-3
2、 Introduction.....................................................................................................................4
3、 Wall Mount Installation.................................................................................................... 5
4、 Installation...................................................................................................................... 6-8
5、 Remote Controller...........................................................................................................9-10
6、 TV Operation..................................................................................................................11-17
7、 Trouble shooting............................................................................................................. 18
-2-
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
CAUTION
The symbol indicates that dangerous
voltages constituting a risk of electric shock
are present within this unit.
The symbol indicates that there are
important operating and maintenance
instructions in the literaturaccompanying this
unit.
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
WARNING:
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install
in accordance with the instructions.
8) Do not install near any heat sources such as
radiations, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized plug. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) the power cord from being walked
on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specified
by the manufacturer.
12) Unplug this apparatus during lighting
storms or when unused for long periods of time.
13) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
14) Mains plug is used as the disconnect device,
the disconnect device shall remain readily
15) The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloth, curtains, etc.
16) No naked flame sources, such as lighted
candles, should be placed on the apparatus.
17) Attention should be drawn to the
environmental aspects of battery disposal.
18) The use of apparatus in moderate climate.
19) The apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on
the apparatus.
Protect
operational.
This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user accessible
parts. When servicing use only
identical replacement parts.
This marking indicates that this product should
not be disposed with other household wastes
throughout the EU. To prevent possible harm to
the environment or human health from
uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of
material resources. To return your used device,
please use the return and collection systems or
contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.
The batteries shall not be exposed to
excessive heat such as sunshine, fire or the
like.
WARNING:
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
-3-
High voltages are used in the operation of this television
receiver. Do not remove the cabinet back from your set.
Refer servicing to qualified service personnel.
SAFETY AND WARNINGS
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Do not trap the power supply cord under the television
receiver.
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it falls.
Do not place your television on an unstable cart, stand,
shelf or table. Serious injury to an individual , and damage
to the television, may result if it falls.
When the television receiver is not used for an
extended period of time, it is advisable to disconnect
the AC power cord from the AC outlet.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.
Dim:5 15*32 0mm(不 包括底 座）
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.
INTRODUCTION
-4-
Main features
① Used as Television, display terminal, PC display；
② High luminance, wide viewing angle；
③ Can store 100 ATV programs；
④ HDMI interface；
5 Multi-Media player (USB);
Accessories
Main parameter
Viewing Picture Size (Diagonal)
Resolution
Aspect Ratio
TV System
Power consumption
Signal Input/Output
Horizon
Video Signal System
Input Power Voltage
Audio Output Power
1920x1080
16 : 9
PAL/BG, PAL/I, PAL/DK
PAL/NTSC/SECAM
（THD 7%）
High-Definition Multimedia Interface (HDMI) x 3
Composite Video Input x 1
Audio Input x 1
YCb (Pb )Cr (P r) x 1
tal definition（TV line ）
Composite
Video input >=350
Y Cb(Pb ) Cr(Pr) >=400
USB x 3
RF x 1
TF x 1
LAN x 1
Headphone Output x 1
Optical Output x 1
80W
AC 100-240V 50/60Hz
2x8W
107cm
Receiving ATV Channel
1-100
RJ45 ： 100M/s
Internet for Android model
minimum internet speed
Infrared Remote Controller............
2
User’s M anual...............................1
WALL MOUNT INSTALLATION
-5-
wall
wall
Step One: Use the expansion bolts(4*36PWA) to fix the wall mount brackets into the wall.
Step Two: Fix the wall mount screws (M6x12mm/4pcs) into the rear side of the LCD TV,using
the tongue of 8kgf.cm.
* The TV appearance subject to material object.
Step Three: Put the LCD TV with wall mount screws onto the wall mount brackets.
Warning: the angle between the TV and wall must not be bigger than 3º.
-6-
INSTALLATION
REAR AV Connections
All the terminals are(from left to right):
AC POWER SOCKET, LAN, HDMI1(ARC), HDMI2, OPTICAL OUTPUT, YPbPr, VIDEO, AUDIO INPUT.
Note: VIDEO and YPbPr share one audio channel.
REAR AV Connections(SIDE)
All the terminals are (from left to right):
RF, USB, HEADPHONE OUTPUT, TF, HDMI3, USB.
HDMI1(ARC) HDMI2LAN OPTICAL YPbPr
VIDEO
L R
RF USB
HEADPHONE
TF Card
HDMI3
USB
Front panel
1: Remote control sensor.
2: Indicator LED: STANDBY.
3: Key board
RED
3
2
1
≤8m
Bottom
On analog and digital TV, the channel
can be switched on and off.
In the absence of audio playback state,
press the volume up / down control.
Open the navigation menu
Navigation menu status
(If this model does not
have the corresponding
function, the icon is grey
and not optional)"
No dispaly in TV
TV Status Middle key Pull Up/Down Pull Left/Right
Navigation menu
Press to open the navigation menu,
press again to close the menu. If there is
no operation, the menu automatically
disappears after 5 seconds.
Press to enter the home page, standby,Press
the corresponding button, the corresponding
icon highlighted, to remind the user has been
operating successfully, and to achieve the
corresponding functions.
Press to enter the menu, input source,Press the
corresponding button, the corresponding icon
highlighted, to remind the user has been operating
successfully, and to achieve the corresponding
functions.
Menu, Home, or
Application status in TV
confirmation key on the remote control.
Short press for confirm,equal to the
return key on the remote control.
Long press to return, equal to the
to the Up/Down key on the remote control.
Achieve up and down buttons function,equal
to the Left/Right key on the remote control.
Achieve left and right buttons function,equal
the standby state
Press to power on
Other states
key on the remote control. If the media video
player, can be played and suspended, and
pop-up setting menu.
Press to confirm,equal to the confirmation
to the Pull Up/Down key on the remote control.
Achieve up and down buttons function,equal
Left/Right key on the remote control. If it is in the case
of the pop-up media video player setting menu,
achieve fast forward and fast rewind function.
Achieve left and right buttons function,equal to the
Press to power on
INSTALLATION
-7-
Note:
Aerial connections: IEC(female).
Input impendance: 75 unbalanced.
ANTENNA
PRESET MODE (HDMI)
1
2
3
800*600
1024*768
60
60
37.88
48.36
RESOLUTION
V.Freq.(Hz) H.Freq.(KHz)
1360*768
60
47.7
4
1280*768
60
47.3
5
1920*1080
60
67.5
INSTALLATION
AV EQUIPMENT
-8-
W R
W R
TO AUDIO
OUTPUTS
VIDEO EQUIPMENT
TO VIDEO
OUTPUTS
Y
Y
This TV provides one group of AV, one group of YPbPr for convenient connection to VCR, DVD
or other video equipment. Please refer to the owner's manual of the equipment to be connected
as well. You can use the input terminals on TV set rear as follows.
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game or stereo
system, etc...YPbPr can support these video fomats: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p.
Note:
1. share one audio channel.
2.Sometimes it will not support in different device because the device supplys nonstandard signal.
VIDEO, YPbPr
Red (audio R)
White(audio L)
Red(Pr or Cr)
R
W
R
Blue(Pb or Cb)
Green(Y)
B
G
Yellow (video)
Y
Audio Receiver
1WAN 2
3
4
HDMI
HDMI
G
B R
VIDEO EQUIPMENT with YPbPr
G
B R
HDMI1(ARC) HDMI2LAN OPTICAL YPbPr
VIDEO
L R
RF USB
HEADPHONE
TF Card
HDMI3
USB
-9-
REMOTE CONTROLLER
Press to turn the TV on or off.
(Power)
S.MODE
Press to select the sound mode.
P.MODE
Press to select the picture mode.
0-9
Press to enter a channel number
or password.
Q.VIEW
Press to switch to the last viewed
channel.
SLEEP
Press to set the sleep timer.
VOL +/-
Press to adjust the volume level.
(Mute)
Press to turn the sound on or off.
AUDIO(I/II)
Press to select Mono,Nicam stereo
for ATV channel.Select Audio
language for DTV channel.
SUBTITLE
Press to turn the subtitle on or off.
Press to open a favorite channel
list.In teletext mode,press to
hold a page.
SCREEN
Press to change picture aspect ratio.
Press to open the on-screen menu.In teletext
mode,press to open the INDEX page.
Press to navigate the on-screen menu.
Press to confirm a selection.OK
Press to return to the previous screen.In teletext
mode,press to enter mix mode.
(reverse)
(forward)
Press to fast forward or reverse
playback in multimedia mode.
In teletext mode,press to open or close teletext page.
SOURCE
Press to open the input source list.
Press to enter into HOME PAGE.
P
Press to change the channel.
Press to display the channel information.
In teletext mode,press to revealthe hidden
information.
Press to open the channel list.In teletext mode,
press to switch the image to top,bottom or full.
3D WORLD
These models do not support 3D feature.
Press to close the on-screen menu.In teletext
mode,press to exit the teletext mode.
16
17
18
19
20
21
22
23
24
25
26
Press to select previous or next file.
(previous)
(next)
Press to stop multimedia playback.
GUIDE
Press to display electronic programme guide
in DTV mode. Press to enter the teletext subpage.
(REC)
Press to record the TV program you are watching
in DTV mode.
Press to play/pause in multimedia mode.(play/pause)
Insert Batteries into the Remote Control
1. Remove the battery cover.
2. Inserting the 2 AAA 1.5V batteries making sure the polarity
(+ or -) of the batteries matches the polarity marks inside the unit.
3. Mount the battery cover. Replace with new batteries when the TV
set begins to show the following symptoms:Operation is unsteady or
erratic. Sometimes the TV set does not function
with Remote Control Unit.
Remark:
1) Alkaline Battery Recommeded.
2) Remove batteries when they are exhausted or if the remote
control is not to be used for long time.
FAV/
MENU/
BACK/
INFO/
CH.LIST/
EXIT/
(stop)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
-10-
REMOTE CONTROLLER
Antenna Type
DVBC
DVBT
DVB Tuning Type
ATV
DTV
-11-
TV OPERATION
Power supply to switch on/off this Unit. Before switch on,
ensure that all connections will be proper and correct.
Press Power on/off (at the botton of the rear panel of this
Unit) to turn on/off this Unit. When the power indicator turns
red, this Unit accesses the power on and standby state.
Basic Operation
Press key to start this Unit.The power indicator turns off.
Press key once again to switch off this Unit.
If there is no signal for the current signal source, this unit will
automatically set to the standby state 10 minutes later.
If not to use the main Unit for a long time, unplug the AC
power cord from the AC outlet.
Select input signal sources
After turn on the main unit, press source to select proper
input source. Press▼▲ buttons to select the main signal
source. Press OK button to confirm.
Setting the OSD Menu
Press MENU button, and the main menu appears. the main
menu display in turn as below:
Picture→Audio→Wide Mode→Channel→Time→Setup
When display of some menu option is gray, it indicates that
such options are not available under the current mode.
General Step for Menu Setup:
●For each main menu, first press▼ to enter the submenu.
●Press ◀▶ to select the desired adjustable option.
●Press ◀▶ to adjust to suitable value.(There is ▶ option
only following such menu, then press ▶ key only)
●After the selection of option is completed, press Menu to be
able to quit the menu.
Installation Guide
The installation guide only appear when the TV first time turn
on or reset to factory set.
1). Press the ▲▼ buttons to navigate the menu and change
the settings. Press the OK button to confirm.
Select your desired language to be displayed on the menu.
Input your password and press confirm to complete.
Note: The default password is 0000.
Home And Shop modes
2). When the unit is turn on for the very first time, it will show
Initialization set-up menu. After the OSD language is set, the
user can choose between "shop mode” and "home mode".
When the screen shows the following setting menu and the
cursor stays on the "home mode" choice, press ◀▶ to adjust,
and "OK" to enter the menu.
If "Home mode" is choosen, the following menu will displayed.
Press "OK" to enter the next prompt menu.
Choose “Cancel” to go back to the Initialization set-up menu, and
the cursor will stay at the “home mode” choose it to go the next
menu to choose the country.
3).Press the ◀ ▶ buttons to select DTV/ATV and then press the
OK button to confirm.
Press the ◀ ▶ buttons to select DVB-T/DVB-C and then press
the OK button to confirm.
a. If you select DVB-T, the next step is to select the country then
press the OK button into the country select menu.
b.If you select DVB-C, the next step is to select the country then
press the OK button into the country select menu.
Source
DTV
ATV
AV
Component
HDMI1
HDMI2
HDMI3
Media
Please select an OSD language
Dutch Russian
Greek
French Italian Spanish German
Romanian
Czech
Polish
Portuguese
Hungarian
English
Arabic
Thai
Password
Please enter new password
Confirm new password
Confirm
Shop Mode
Home Mode
Select the usage mode?
Shop mode is for shop usage only.
Confirm
Are you sure to change to Home mode?
CancelOK
Country
Nigeria
India
Iran
Malaysia
Thailand Saudi Arabia
Israel
Iraq
Pakistan
Benin
Philippines Egypt
Kuwait
Indonesia
Morocco
Audio
Bass 50
Treble
Equilizer
AVC
Surround
SPDIF Output
Balance
50
off
off
PCM
50
Move Enter Back
OK
Are you sure to exit DTV tuning?
YES NO
Auto Tune
Search: 0 DTV 0 Radio 0 Data
VHF CH 0 Freq 0 MHZ
0%
Start Search
Enter Back
OK
-12-
TV OPERATION
1. Picture MENU
1). Press the MENU button and then press the ◀▶ buttons to
select the Picture menu and then press the ▼ button.
2). Press the ◀▶ buttons to select submenu
ECO/Standard/User/Mild/Vivid Mode.
●User Mode:
Picture: You can adjust picture effect here, such as
brightness, color, sharpness etc.
Sound: You can adjust the sound effect here, such as bass,
treble, balance etc.
4). Channel tuning will commence. This operation may take up
to some minutes . The display will show the progress of the
tuning and the number of channels found.
5). If you want to skip the Auto tuning, press the MENU button
to interrupt the tuning half way.
A pop-up screen will be displayed, press the OK button to to
onfirm. You will then go straight to Network.
6). After tuning is complete, the channels are arranged in a
preset order. If you wish to skip channels, modify the preset
order or rename channels, select Programme Edit under the
channel menu.
2. Audio MENU
1). Press the MENU button and then press the ◀▶ buttons to
select the Audio MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select submenu.
Standard/Music/Theatre/User
●User Mode:
Picture: You can adjust picture effect here, such as
brightness, color, sharpness etc.
3. Wide Mode MENU
1). Press the MENU button and then press the ◀▶ buttons to
select the Wide Mode MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select submenu.
Auto/16:9/4:3/Zoom1/Zoom2/Just Scan
4. Channel MENU
1). Press the MENU button and then press the ◀▶ buttons
to select the Channel MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select submenu.
Antenna Type/Auto Tune/Manual Tune/Program Edit/Signal
Information.
4.1 Antenna Type
1). Press the MENU button and then press the ◀▶ buttons
to select the Channel MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select Antenna Type and press
OK to confirm.
3). press the ◀▶ to select Air or Cable.
Picture Audio Channel TimeWide Mode Setup
Standard VividECO User
Picture
Contrast 50
Brightness
Color
Sharpness
Tint
Back Light
Image Noise Reduction
Color Temperature
50
50
50
50
100
Weak
Normal
Move Enter Back
OK
Picture Audio Channel TimeWide Mode Setup
Standard Music Theatre User
Picture Audio Channel TimeWide Mode Setup
Auto16:9 4:3 Zoom1 Zoom2 Just Scan
Picture Audio Channel TimeWide Mode Setup
Antenna Type Auto Tune Manual Tune Program Edit Signal Information
Mild
Country
Nigeria
India
Iran
Malaysia
Thailand Saudi Arabia
Israel
Iraq
Pakistan
Benin
Philippines Egypt
Kuwait
Indonesia
Morocco
Manual Tune
Frequency 113 MHZ
Modulation
Symbol Rate
Signal Strength
64 QAM
6875
Move Enter Back
OK
Search
DTV: 0 DATA: 0 RADIO: 0
Signal Quality
Program Edit
Move Enter Back
OK
Delete Edit Move Skip Favorite
5 five DTV
15 Ch 15 DTV
16 QVC DTV
Antenna Type
Antenna Type
Move Back
Cable
Antenna Type
Antenna Type
Move Back
Air
TV OPERATION
-13-
4.2 Auto Tune
1) press the ◀▶/▼▲ buttons to select the country where you
will operate the TV. Press the OK button to confirm.
2) If "country" is choosen, the following menu will displayed,
then press the ◀▶ buttons to select Full Scan or Quick Scan.
3) press▼▲to select confirm ande press OK to Confirm.
3).Channel tuning will commence. This operation may take up
to some minutes . The display will show the progress of the
tuning and the number of channels found.
4). If you want to skip the Auto tuning, press the MENU button
or OK button to interrupt the tuning half way.
A pop-up screen will be displayed, press the OK button to
confirm. You will then go back main menu.
5). After tuning is complete, the channels are arranged in a
preset order. If you wish to skip channels, modify the preset
order or rename channels, select Programme Edit under the
channel menu.
4.3 Manual Tune
1). Press the MENU button and then press the ◀▶ buttons to
select the Channel MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select Manual Tune and press OK
to confirm.
4.4 Program Edit
1). Press the MENU button and then press the ◀▶ buttons to
select the Channel MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select Program Edit and press
OK to confirm. You can Delete, Rename, Move, Skip, favorite.
● Delete
Press teletext red button, the program is cursor will delete.
● Edit
Only can rename ATV programs.
Move the cursor to the program, press teletext green button
to rename the program.
Press ▼▲ to choose the character, press◀▶to move the cursor.
Press MENU button to exit edit, Press EXIT to exit the menu.
● Move
Use the Arrow Buttons to select the channel you wish to move.
Then press the Yellow Button to select Move function. Once
active use the Arrow Buttons to move and then press OK to
confirm.
● Skip
Press ▼▲ to choose the program, press teletext blue button to
skip this program, Choose the skipped program, The will
show on the right side of the program. Choose the skipped
program, press blue button again, you can cancel the skip. The
will disappear.
● Favorite
Press ▼▲ to choose the program, press FAV button, it will show
on the side of the program. Choose the FAV program, press
FAV button again, you can cancel the FAV, the will disappear.
Once you favorite group is created, you can press the FAV key
to quickly access your favorite channel.
4.5 Signal Information
1). Press the MENU button and then press the ◀▶ buttons to
select the Channel MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select Signal Information and
press OK to confirm.
Auto Tune
Search Type Full Scan
Modulation
Symbol Rate
Network ID
Auto
Auto
0
Move Enter Back
OK
Confirm
Modulation Symbol Rate Network ID
3).press▼▲the select Frequency, Modulation, Symbol Rate
etc.
4).press ◀▶ to adjust the value.
5).press ▼▲ to select Search button and than press OK to
Search.
Auto Tune
Search: 0 DTV 0 Radio 0 Data
VHF Freq 0 MHZ
0%
Start Search
Enter Back
OK
Country
Nigeria
India
Iran
Malaysia
Thailand Saudi Arabia
Israel
Iraq
Pakistan
Benin
Philippines Egypt
Kuwait
Indonesia
Morocco
-14-
TV OPERATION
6. Setup MENU
1). Press the MENU button and then press the ◀▶ buttons to
select the Setup MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select submenu.
HDMI_CEC/System Lock/Advance
On Time/Off Time/Advance
You can adjust Off Time, On Time, Sleep Time etc.
6.1 HDMI_CEC
1). Press the MENU button and then press the ◀▶ buttons to
select the Setup MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select HDMI_CEC and press OK
to confirm. If the HDMI_CEC is On, you can through the tv
remote control to control the blu-rayplayer. ARC is to select the
sound equipment.
6.2 System Lock
1). Press the MENU button and then press the ◀▶ buttons
to select the Setup MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select System Lock and press OK
to confirm.
You can lock system, set password, block program and set
parental Guidance, Once you set the lock system on you can
not search the channels or change any programs.
The default pass word is 0000,if you forget the password,
you can sue the super password:9443.
Channel Lock: Press ▼▲ to select Channel Lock and press OK
to confirm.
Parental Lock: Press ◀▶ to choose rating.
6.3 Advance
1). Press the MENU button and then press the ◀▶ buttons
to select the Setup MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select Advance and press OK
to confirm. Here are some of the TV set.
5. Time MENU
1). Press the MENU button and then press the ◀▶ buttons to
select the Time MENU and then press the ▼ button.
2). Press the ◀▶ buttons to select submenu.
Picture Audio Channel TimeWide Mode Setup
On Time Off Time Advance
On Time
On Time Off
Hour
Minute
Source
02 AM
01
Move Enter Back
OK
Channel
DTV
0
Advanced Setting
Sleep Time Off
Auto Sleep
Auto Standby (4hr)
Off
On
Move Enter Back
OK
Time: 1970-1-1 02:01 AM
Off Time
Off Time Off
Hour
Minute
02 AM
01
Move Enter Back
OK
Picture Audio Channel TimeWide Mode Setup
HDMI_CEC System Lock Advance
HDMI_CEC
HDMI_CEC On
ARC
System Standby
On
Off
Move Enter Back
OK
Device List
System Lock
Input Password
Set Password
Lock System Off
Move Enter Back
OK
Channel Lock
Parental Lock
Parental Guidance
OFF
Move Enter Back
OK
4
5
Channel Lock
15
Move Enter Back
OK
16
17
23
25
Ch 15
DTV
QVC
DTV
bid-up.tv
DTV
TCM
DTV
UK Gold
DTV
Advanced Setting
Menu Time 15 Seconds
Audio Language
2nd Audio Language
Move Enter Back
OK
Language
Subtitle Language
English
English
2nd Subtitle Language
English
English
AD
AD Volume
Hearing Impaired
Shop Mode
Off
35
Switch Mode
Off
Mirroring
On
Blue Screen
PVR File System
On
Restore to Default
TV OPERATION
-15-
TV OPERATION
Android Mode
If you are in the TV Mode, you can press “BACK” buttons to
go to Android Mode. When you press the “BACK” button, the
following menu will displayed. Also, you can press “ ” button
to goto Android Mode.
Press “OK” to select.
Now you are in the Android Mode.
1) Home Menu.
In Home menu you can choose a few here in some app. such
as Play store, YouTube, Twitter, Facebook, Skype,Google etc.
SMARTShare can put you on the phone’s screen shows on TV.
You can choose the System Settings to set the Android system.
Tip
Sure you want to exit TV system?
OK
Cancel
1.1 Net
You can choose the Wi-Fi to connect Wi-Fi ,Ethernet.
If you connected Wi-Fi,the Ethernet will closed.
1.2 Sound
You can press the Sound button to change the sound
volumes or close the press sounds.
1.3 Display
You can press the Display button to replace your Wallpaper
or change your Font size type, and video settings.
1.4 Storage
You can press the Storage button to view the memory status.
1.5 Apps
You can press the Apps button to view your install apps.
1.6 Location
You can check your local services.such as google Location
reporting.
1.7 Security
You can Make passwords visible, view or deacticate device
administrators, and allow installation of apps from
unknown sources.
TV OPERATION
-16-
TV OPERATION
1.8 Language & input
You can reset your OSD language,this functions are about
language, Keyboard etc, and you can go to your habits.
1.9 Backup & reset
You can Back up app data, Wi-Fi passwords, and other
settings to Google servers.
If you want to make your system to reset to defaults, you can
press the Factory data reset.
Warning: evenow, please backup your personal data.
1.10 System Update
Here you can upgrade your system by Local update or
Net update.
1.11 Add account
You can add an account at this point.
1.12 Date & time
Here is some of time Settings, you can go to your habits.
1.13 About TV
Here is some version info,such as Model number, Android
verdion, Kernel version, Build number.
2) Application Menu
There are some Apps, you can choose your like application,
and press Ok button to open it.
3) Media Menu
You can insert your USB storage device, you can browse
your pictures, music, video on TV.
TV OPERATION
-17-
TV OPERATION
Picture Audio
Snow Noise
antenna position, direction
or connection
Inspection
Interfere
Noise
electronic equipment,car/
motorcycle,fluorescent light
Normal Picture
Mute
Volume(inspect wether the
mute function on the remote
control are started , or audio
system are correct or not)
No picture Mute
Power cord is not inserted
Power switch is not opened
Contrast and brightness/volume
setup
Press standby key on the remote
control for inspecting
No color Normal audio color control
Scramble
Normal audio
or weak
retune channel
No color
Noise
Audio system
Special Explanation：The accessories such as remote control is not belongs
to the guarantee。
Normal audio
antenna position, direction
or connection
Trouble phenomenon
Ghost
-18-
TROUBLE SHOOTING
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Haier LE42U6500A Owner's manual

Haier
Brand
Haier
Model
LE42U6500A
Category
LCD TVs
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents