Application
The faucet is used for filling sinks with water. Dual
hand knobs allow manual selection of hot and cold
water mixtures. The overhead spray assembly is
used for rinsing or spraying water in directions
controlled by hand operation of the spray nozzle. The
center hand knob can shut off flow to the faucet while
the spray nozzle is in use.
Standard Specifications
Faucet:
• Dual water control valves with built in check valves for
cross flow prevention.
• Four arm kitchen handles with color coded indexes.
• Pivoting spout with 14” swing radius.
Spray Assembly:
• 44” Flexible hose.
• Spring support for easy control.
• Finger hook to hold the spray nozzle at the back of
the sink.
Mounting and Connection:
• 8” Center to Center vertical backsplash mount
through 1-1-/4” diameter holes.
• 1/2” NPT x 1/2” Sweat fittings.
• 8” Tall riser with 3/8” NPT cross fitting for additional
accessory connection.
• 12” Wall bracket for riser support.
Operational:
• Faucet 9 GPM (at 60 psi)
• Spray nozzle 0.65 GPM
Warranty:
One year on parts from date of shipping.
- PAGE 1 -33940 - 11/9/2011 Patents Granted
Power Soak Systems, Inc.
903 E. 104th Street Suite 130
Kansas City , MO 64131
Ph: 816-222-2400
www.powersoak.com
33612
SPECIFICATIONS
33612 - 1/2" Combo Faucet - 33612
14
2 3/8
2 3/8
9 7/8
6 3/8
1 3/8
18 1/8
34 3/8
MOUNTING
SURFACE