Bartscher 300147 Operating instructions

Type
Operating instructions

Bartscher 300147 is a dishwasher basket trolley designed for storing and transporting dishwasher baskets in commercial kitchens. It features a sturdy stainless steel construction, with a load-bearing capacity of up to 100 kg. The trolley has seven guide pairs, each with a maximum load capacity of 20 kg, and is designed to accommodate dishwasher baskets measuring 500 x 500 mm. It also has four swivel casters, two of which are lockable, for easy maneuverability and stability. The trolley comes as a building kit with a plug system, making assembly quick and easy.

Bartscher 300147 is a dishwasher basket trolley designed for storing and transporting dishwasher baskets in commercial kitchens. It features a sturdy stainless steel construction, with a load-bearing capacity of up to 100 kg. The trolley has seven guide pairs, each with a maximum load capacity of 20 kg, and is designed to accommodate dishwasher baskets measuring 500 x 500 mm. It also has four swivel casters, two of which are lockable, for easy maneuverability and stability. The trolley comes as a building kit with a plug system, making assembly quick and easy.

ASP700
300147
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: +49 5258 971-0
Fax: +49 5258 971-120
Service hotline: +49 5258 971-197
www.bartscher.com
Version: 1.0
Date of preparation: 2019-07-03
Original instruction manual
EN
300147 3 / 7
EN
Technical Specifications
Name:
Dishwasher basket trolley ASP700
Item No.:
300147
Material:
Stainless steel
Number of guide pairs:
7
Guide dimensions (W x D) in mm:
505 x 545
Distance between guide pairs in mm:
200
Load-bearing capacity per guide pair, max.
in kg.:
20
Number of swivel casters:
4
Locking swivel casters:
2
Diameter of casters in mm:
100
Number of caster dampers:
4
Material of caster dampers:
plastic
Total load-bearing capacity, max. in kg:
100
Dimensions (W x D x H) in mm:
630 x 615 x 1750
Weight in kg:
15,8
We reserve the right to implement technical modifications!
Version / Characteristics
Area of application: clearing/storage
Version: guides
Designed for: dishwasher baskets 500 x 500 mm
May be loaded from both sides
Square tubing frame, 25 x 25 mm section
One basket lock per front and rear of the trolley
Delivery state: building kit, plug system (simple assembly)
<Endergebnis>
4 / 7 300147
EN
Scope of Delivery / Part Name
Unpack the dishwasher basket trolley and remove the packing material pursuant
to environmental regulations.
Check completeness of delivery according to the list below:
Element
Name
Lateral sections with 7 preinstalled
guides and
1 basket lock per each
Crossbars
Locking swivel casters
Swivel casters without locking
Swivel caster dampers
Allen wrench
Square washers
Bolts
300147 5 / 7
EN
Intended Use
The dishwasher basket trolley is intended for storing suitable dishwasher baskets,
with dimensions of 500 x 500, in commercial kitchens.
Assembly
Fig. 1
Fig. 2
1. Place one lateral section on the ground.
2. Take 6 crossbars (top, middle and bottom) and mount them on the lateral
section of the dishwasher basket trolley (Fig 1).
3. Each time, with top and bottom crossbar, use square washer between a
crossbar and the lateral section and between lateral section and a bolt.
4. Then, use Allen wrench and tighten the bolt.
5. Each time, with middle crossbars, use only one square washer between the
lateral section and a bolt.
6. Use Allen wrench and tighten the bolt.
7. Mount 6 crossbars on the second lateral section, using washers and blots, as
described above (Fig. 1).
6 / 7 300147
EN
8. Place the dishwasher basket
trolley on its side.
9. Mount 4 swivel caster dampers
onto square tubing of lateral
sections.
10. Finally, screw swivel casters into
square tubing of lateral sections.
(Fig. 3)
Fig. 3
Positioning
1. Set the dishwasher basket trolley on swivel casters and check its stability.
2. Thedishwasher basket trolley may be levelled through screwing in and out
swivel casters.
3. After setting the dishwasher basket trolley in a designated place, lock 2 swivel
casters with lockings to prevent accidental relocation or overturn of the trolley.
Loading of the dishwasher basket trolley / Fixing of the basket locks
1. Place required number of suitable
dishwasher baskets in guides.
2. Secure dishwasher baskets at front and
rear with basket locks, lifting them up and
closing before dishwasher baskets (Fig. 4).
Basket locks stop dishwasher baskets from
slipping, tilting or falling out.
3. Zabezpieczyć kosz e do zmyware k z przodu i z t yłu za pomocą blokad kosza, p odciągając je do góry i zamykają c przed kosz ami do z mywarek (Rys. 4). Blokady kosza z apobiegają ześlizg iwaniu si ę, przechylaniu l ub wypadani u z koszy do z mywarek.
Fig. 4
300147 7 / 7
EN
Cleaning
CAUTION!
For cleaning, do not use any scouring agents containing solvents nor
corrosive cleaning agents. They may damage the surface.
1. Clean the dishwasher basket trolley regularly with warm water and soft, damp
cloth. Use mild cleaning agent if required.
2. Dry the dishwasher basket trolley with soft cloth.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Bartscher 300147 Operating instructions

Type
Operating instructions

Bartscher 300147 is a dishwasher basket trolley designed for storing and transporting dishwasher baskets in commercial kitchens. It features a sturdy stainless steel construction, with a load-bearing capacity of up to 100 kg. The trolley has seven guide pairs, each with a maximum load capacity of 20 kg, and is designed to accommodate dishwasher baskets measuring 500 x 500 mm. It also has four swivel casters, two of which are lockable, for easy maneuverability and stability. The trolley comes as a building kit with a plug system, making assembly quick and easy.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages