2. ZyXEL
  3. VMG3625-T20A
VMG3625-T20A

ZyXEL VMG3625-T20A Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the ZyXEL VMG3625-T20A Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Use the gray phone cable to connect the DSL port to a DSL splitter
(1-a) or directly to the telephone wall outlet.
OR
Use an Ethernet cable to connect the WAN port to a gateway
modem (1-b).
Connect a computer to the LAN port using the yellow Ethernet
cable (optional).
Connect a 3G dongle (optional).
Connect the power cable to the modem and press the power
button.
EN
1
2
3
4
Connect the stand with the bracket holes facing up.
Place the device vertically on a smooth level surface.
1
2
The SSID and Wireless key are on the device label.
On your smartphone or notebook, find this SSID.
Enter the Wireless key to connect.
1
2
Quick Start Guide
1/2
ENGLISH
VMG3625-T20A
Dual-Band Wireless AC/N Combo
WAN Gigabit Gateway with USB
WiFi Connection / Using SSID
1 2
WLAN/WPS
SSID (2.4G)
SSID (5G)
Wireless key
Zyxel_xxxx
Zyxel_xxxx_5G
XXXXXXXXXX
SSID (2.4G)
Wireless key
XXXXXXXXXX
Zyxel_xxxx
OR
Wireless key
XXXXXXXXXX
Zyxel_xxxx
WiFi
Hardware Connections
1
1-b
Desktop Installation
1
2
DSL
1-a
2
3 4
OR
INTERNET
Internet is ready.
Internet is not ready.
ON
INTERNET
OFF
POWER
OR
LAN
WAN
POWER
ON
Power On
Quick Start Guide
Copyright © 2017 Zyxel Communications Corp. All Rights Reserved.
See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings.
2/2
ENGLISH
VMG3625-T20A
Dual-Band Wireless AC/N Combo
WAN Gigabit Gateway with USB
Device Label
(Optional) Drill two holes at the distance of 105mm apart.
Insert screw anchors and screws (not provided) into the
holes. Attach the bracket to your VMG3625-T20A with the
bracket holes facing down. Hang it on the screws.
WiFi Connection / Using WPS
x2x2
Wall Mounting (Optional)
1
Press the WPS button until the WiFi 2.4G and 5G LEDs
light up in amber.
Press the WPS button on the client. If the WPS method fails,
perform the Using SSID method.
105mm
1
2
Open a web browser and go to http://192.168.1.1.
Enter the default User Name (admin) and admin login pass-
word (on the device label), and then click Login.
A wizard runs. Follow the wizard prompts to complete the
setup.
Quick Start Wizard
VMG3625-T20A
User Name
Password
xxxxxxxx
admin
Login
User Name : admin
Password : Refer to the device label
(default)
http://192.168.1.1
Welcome to Quick Start wizard
Time Zone
Next CloseBack
WiFi 2.4G
ON
WiFi 5G
ON
within
minutes
2
More than 5 seconds
WiFi
ZyXEL VMG3625-T20A
Connect
OR
WiFi
WPS
setup
Android Only
WLAN
WPS
2
/