3
Electrical Markets Division
6801 River Place Blvd.
Austin, TX. 78726-9000
June 2009
3M™ Cold Shrink Quick Insulator QI Series
Sales Demo Sheet:
Installation Instructions:
1. Park the QI insulator on the cable prior to
making the connection.
2. Make the connection and file off any sharp
edges on the connector.
3. Center the QI insulator over the connection.
4. Install the QI insulator by pulling the loose core
end and unwinding (counter clockwise). Continue
unwinding until installation is complete.
5. Installation is complete.
Features, Advantages and Benefits:
Features Advantages Benefits
Quick & consistent
installation
Time savings and
reliability
Excellent sealing
Long-term
performance
Avoids use of heat/flame
Safety
Lower skill
requirements
Durability Long life, reliability
Range Taking
Reduced inventory
Accepts different
diameter cables
Fills in cable jacket
imperfections
Reliable seal
Factory Installed
Mastic Rings
Cold Shrink
Technology
Demo Tips:
• Perform hands-on demonstration with the
customer.
• Explain the range-taking capability of the
factory installed mastic rings and the
ability to fill in cable imperfections.
• Explain the opportunity to reduce
inventory due to the range-taking
capability of the QI Series insulator.
• Explain the benefit of a low profile part.
-
1
3M Cold Shrink Quick Insulator QI 5/16-220, 1 kV, 10/Case Operating instructions
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
3M Cold Shrink Transition Splice Kit QS2013-3T, CN, JCN, 15 kV, 1/case Operating instructions
-
-
-
3M Cold Shrink QT-III 3/C Termination Kit 7685-S-8-3-RJS, Tape/Wire/UniShield®, 3.3-35 kV, Insulation OD 1.18-1.52 in, 3/kit Operating instructions
-
-
-
-
-
-