BLADE DRIVER KIT 18905
18906 REV 18-227
Please check the table and diagram to
familiarize yourself with the order of
the assembly and to make sure no parts
are missing.
Note: The blade pulley (not included)
will be assembled between items 2 and 3
at the top of the diagram. The stump
jumper (not included) will be assembled
between items 7 and 2 at the bottom of
the diagram. Both nuts, items 1 and 8,
need to be tightened to 235 ft/lbs.
ITEM # QTY PART # DESCRIPTION
1 1 NB612 Nut - Nyloc 1"-8
2 2 NB738 Washer - 1" X 2" X 14GA
3 2 21344 Spacer - Pulley
4 2 4845 Bearing - Blade
5 1 18844 Shaft - Blade
6 1 4858TK Blade Driver Housing
7 1 NB614HT Washer - 1" X 1.5" X 10GA
8 1 18850 Nut - Nyloc 1"-14
/