FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FAUCET DESCRIPTION
• Metal constructionwith chrome plated finish
• Inlet shanks will accept 3/8” ball nose connections
OPERATION
• Mini blade style handles with hot and cold
color indicators
CARTRIDGE
• 1224 cartridge design
STANDARDS
• Designed and manufactured to comply with the
requirements of: CSA B-125 and ASME A112.18.1M and all
applicable specications ref er enced therein
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects
to the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
MOEN
®
Two Handle Laundry Faucet
Model: 74998
NOTE: Designed to be installed through
2 - 1” min. dia. holes 4” on center
Rev. 6/17
3/4" (19mm)
MAX. DECK
THICKNESS
5-7/16"
(138mm)
6-5/8"
(168mm)
4-63/64"
(127mm)
2-1/2"
(64mm)
2"
(51mm)
2"
(51mm)
6-7/16"
(164mm)
2-7/8"
(73mm)
There is more than 1 version of this model.
Page down to identify the version you have.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FAUCET DESCRIPTION
• Chrome plated metal construction
OPERATION
• Small lever style
CARTRIDGE
• 1224 cartridge design
STANDARDS
• Designed and manufactured to comply with the
requirements of: CSA B-125 and ASME
A112.18.1M and all applicable specifications
ref er enced therein
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects
MOEN
®
Two Handle Laundry Faucet
Model: 74998
NOTE: DESIGNED TO INSTALL
THROUGH 2 HOLES 1” (25mm) MIN. DIA.
AND 4” (102mm) ON CENTER
Rev. 6/17
3-1/8"
(79mm)
2"
(51mm)
ESCUTCHEON
6-3/4" (171mm) x 2-3/8" (60mm)
HOT INLET
COLD INLET
5-1/4"
(133mm)
5-1/2"
(140mm)
3/4" (19mm)
MAX. DECK
THICKNESS
6-3/4"
(171mm)
2"
(51mm)
/