SG-785 RS-485 Termination Resistors Module - QuickStart (Feb/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
1
SG-785
RS-485 Pull-high/pull-low
Termination Resistors Module
Quick Start Guide
Product Info:
http://www.icpdas-usa.com/sg_785.html
1. Introduction
The SG-785 is an optional module that is used to improve the communication of
the RS-485 network. It provides switch selectable pull-high and pull-low resistors
on the RS-485 network. It also has 15-step switch selectable termination resistor
such that the user can select a proper termination resistor to be connected to the
RS-485 network easily.
2. Pin Assignment
-
1
-
2
ICP SG-785 - RS-485 Pull-high/pull-low Termination Resistors Module Quick Start
- Type
- Quick Start
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
ICP DAS USA I-7019R Quick Start
-
ICP DAS USA M-7017Z - 10/20-channel Current and Voltage Analog Input Module, communicable over Modbus RTU and RS-485 Quick start guide
-
-
-
ICP GW-7228 Quick Start
-
-
-
-
-
ICP DAS USA M-7018Z-G/S - 10 Channel Voltage & Current Thermocouple Input Data Acquisition Module, High Over Voltage Protection & Cable Quick start guide