Kilotech S-2000 Owner's manual

Brand
Kilotech
Model
S-2000
Type
Owner's manual
S-2000
Price Computing Scale
OWNER’S MANUAL
CONTENTS
PRECAUTIONS 4
PREFACE 6
NAMES AND FUNCTIONS 6
OPERATIONS 8
1. How to Convert the Unit of Weight 8
2. General Weighing 10
3. Weighing with Tare 10
4. Saving a Currently Called Unit Price 12
5. Saving a Current Tare 12
6. Add-up Sales 14
7. Recalling the Added Total Price 14
8. Saving a PLU to Memory 15
9. How to Call to PLU 16
ERROR MESSAGE 18
SPECIFICATIONS 19
45
PRECAUTIONS
Keep the scale away from strong EMI noises may cause incorrect weight
readings.
Do not subject the scale to sudden
temperature changes.
Place the scale on a flat and stable
surface.
If the scale is not properly
level, please adjust the 4 legs
at the bottom of the scale
(turn legs clockwise or
counterclockwise) so as to
center the bubble of the
leveling gauge inside the
indicated circle.
Do not subject the platter to sudden
shocks. This scale must be installed in a dry
and liquid free environment.
Leveling gauge
Make sure that you plug your scale into the proper power outlet.
Plug into a power outlet 10 minutes before operations.
7
6
PREFACE
NAMES AND FUNCTIONS
Thank you for purchasing our CAS S-2000 Series.
These series have been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your specialty departments can enjoy these
high quality reliable CAS products.
We believe that your needs will be satisfied and you will have proper reliability.
This manual will help you with proper operation and care of the S-2000 Series.
Please keep it handy for future reference.
OVERALL VIEW
PLATTER
DISPLAY
ADJUSTING
BOLT
LEVELING
GAUGE
KEYBOARD
DISPLAYS
:
15x0.005kg 30x0.01lb
ZERO
TARE
CAPACITY
CAPACITE
ZERO NET lb kg
WEIGHT
POIDS TOTAL PRICE
PRIX TOTAL
UNIT PRICE
PRIX UNITAIRE
SAVE
$
/100g
$
/lb
$
/kg
WEIGHT
POIDS
ZERO NET lb kg
CAPACITY
/
CAPACITE
:
15x0.005kg 30x0.01lb
UNIT PRICE
PRIX UNITAIRE
SAVE
$
/100g
$
/lb
$
/kg
TOTAL PRICE
PRIX TOTAL
S-2000
S-2000
Operator Side
Customer Side
KEYBOARD
789
123
456
0C00
M1 M2 M3
MW MR
ADD
RE-
CALL
ZERO TARE kg / lb
100g
SAVE
KEY FUNCTIONS
~
0
00
9
~
M1 M3
C
100g
MW
MR
SAVE
Used to enter all the numerical data.
Used to enter a double zeros.
Used to clear all the numerics on the unit price display.
Used to clear sum total price.
Direct PLU(Price Look Up) keys.
In metric mode, allows unit price per 100g.
Used to store PLU to memory.
Used to call indirect PLU in memory.
Used to saves currently called unit price and tare.
KEYS FUNCTIONS
9
8
OPERATIONS
KEY FUNCTIONS
ADD
ZERO
TARE
kg / lb
RE-
CALL
Used to add a transaction.
Used to call a total price of add up transactions.
Used to correct the zero point.
Used to enter a tare weight.
Used to delete a tare weight.
Toggle between metric and non-metric mode.
KEYS FUNCTIONS
1. How to Convert the Unit of Weight
kg / lb
This is the metric mode.
Press the kg/lb key. The weight display should read “Pound” and
remain this way for about 2 seconds.
The weight display should read “0.00”
automatically.
Now, you can use the non-metric mode.
Make sure that kg lamp should be on.
100g mode: Note that you can use this function only in the metric mode.
If you want to use this mode, press the 100g key.
Make sure that 100g lamp should be on.
NOTE: To use non-metric mode from 100g mode, please do the followings.
Press the 100g key, Now you are in the metric mode.
Press the kg/lb key, Now you are in the non-metric mode.
kg / lb
This is the non-metric mode.
Press the kg/lb key. The weight display should read “nEtric” and
remain this way for about 2 seconds.
The weight display should read “0.000”
automatically.
Now, you can use the metric mode.
WARNING: When you change the unit of weight, avoid leaving any item or
items on the platter.
A) From metric mode to non-metric mode
Make sure that lb lamp should be on.
B) From non-metric mode to metric mode
B) Known Tare(Keyboard Tare) Mode
TARE
Enter tare weight by pressing the numeric key. Press TARE key.
Place the container on the platter and enter
a unit price. Place the commodity in the container.
Remove commodity with container from
the platter.
11
10
5 00
Place a commodity on the platter. Enter a unit price.
2. General Weighing
TARE
Remove the commodity from the platter.
NOTE 1: The represents the lamps on the displays above.
This is the metric mode, so kg lamp should be on.
NOTE 2: The unit price is cleared automatically after each transaction.
3. Weighing with Tare
A) Unknown (weighed) tare
Place the container on the platter. Press TARE key.
5 00
Place the commodity in the container. Enter a unit price.
Remove commodity with container from
the platter.
NOTE: The tare is cleared automatically after each transaction.
Not all the countries are applicable with a tare-clear function.
B) Known (manually entered) tare
TARE
5 00
Enter a tare value. Press TARE key.
Place a container on the platter. Place a commodity in the container.
Enter a unit price. Remove the commodity and the container.
The display still shows the tare value and the
unit price.
13
Remove the commodity from the platter.
Then the display still shows unit price.
5. Saving a Current Tare
A) Unknown (weighed) tare
Place a container on the platter. Press the TARE key and enter a unit price.
Place a commodity in the container. Remove the commodity from the container.
Remove the container.
Then the display still shows the tare and the
unit price.
12
5 00
Press the SAVE key and enter a unit price. Place a commodity on the platter.
4. Saving a Currently Called Unit Price
This function saves currently called unit price from automatically clearing.
8. Saving a PLU to Memory
This function stores each PLU into a internal back up memory.
PLU means Price Look Up which has a unit price.
This scale has 3 memories of direct PLUs and 200 memories of indirect PLUs.
A) FOR DIRECT PLU KEYS
For example: $ 2.99 - M1 key
15
Enter a unit price and place a commodity then
press ADD key. Remove the commodity from the platter.
RE-
CALL RE-
CALL
Press RECALL key. Press RECALL key again to return to weighing
mode.
Place another commodity and enter a unit
price then press ADD key. Remove the commodity from the platter.
NOTE: You can add-up items up to 99 times or $ 9999.99 in this manner.
Otherwise, you will hear a beep sound.
14
6. Add-up Sales
This add up function adds up a total price of several commodities.
You can check the total price by pressing RECALL key.
7. Recalling the Added Total Price
This function is used in conjunction with the ADD key.
TTP CALL shows the total price of all the added items.
When you press the TTP CALL key without using the add up function, you will
hear a beep sound.
To display the total price of added commodities.
To clear the total price of added commodities.
RE-
CALL C
Press RECALL key. Press C key to clear total price and return to
weighing mode.
2 9 9
MW
Enter a unit price.
M1
Press desired one of the direct PLU keys.
Press MW key.
17
16
MW
3 7 5
MW
1 2 5
Enter a unit price. Press MW key.
Enter a desired address of the PLU. Press MW key.
B) FOR INDIRECT PLUS
For example: $ 3.75 - 125 (address)
9. How to Call a PLU
Make sure that the platter is empty when you call a PLU.
The possible numbers of this function are 200.(address 0 through 199)
A) FOR DIRECT PLU KEYS
For example: M1 key - $ 2.99
M1
Press one of the direct PLU keys. Place a commodity on the platter.
Remove the commodity from the platter.
B) FOR INDIRECT PLUS
For example: 125 (address) - $ 3.75
1 2 5
MR
Enter the address of an indirect PLU. Press MR key.
Place a commodity on the platter. Remove the commodity from the platter.
NOTE: Do not use the decimal point while recalling PLU’s.
18 19
SPECIFICATIONS
MODEL
CAPACITIES
DISPLAYS:
WEIGHT
UNIT PRICE
TOTAL PRICE
MAXIMUM TARE
POWER SOURCE
POWER CONSUMPTION
TEMPERATURE RANGE
PLATTER SIZE(mm)
PRODUCT SIZE(mm)
ERROR MESSAGES
To help the customer’s understanding, this scale warns the error messages
properly. Please refer to error table.
An error of the initial zero range
Failure of returning the normal
mode
An over flow was occurred from
ADD key
An over flow was occurred from
FIX ADD key
An over flow of the transaction count
An over flow of the accumulations of
the daily total functions
Failure of the analog module
Failure of the digital module
Condition codes are broken
Key codes are broken
When you go to non-metric mode
from 100g mode, you had a wrong
operation
1.Set the platter empty
2.Make sure there is a platter on the
scale
Call your CAS dealer
Press C key
Press C key
Press C key
Press C key
Call your CAS dealer
Call your CAS dealer
Call your CAS dealer for span calibration
Call your CAS dealer for span calibration
Press the 100g key and then press the
kg/lb key.
ERROR REASONS SOLUTIONS
Err 1
Err 2
Err 6
Err 7
Err 8
Err 9
Err 10
Err 11
Err 12
Err 13
Err 14
S-2000 Series
15 0.005kg 30 0.01lb
Vacuum Fluorescent Display
5 DIGITS
6 DIGITS
6 DIGITS
-9.995kg -30.00lb
AC 110/120/220/240V, 50/60Hz
APPROX. 10W
10°C 40°C
372(W) 278(D)
478(W) 365(D) 495(H)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Kilotech S-2000 Owner's manual

Brand
Kilotech
Model
S-2000
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents