Sika 187782 User manual

Type
User manual

This manual is also suitable for

MATERIALS:
• Safety glasses and gloves • 5 Gal. / 1 Gal. / 1 Qt. of SikaLatex® R
• Mixing container • Wire brush
SITE PREP & PROCEDURE (As a Bonding Agent)
1. Remember to always wear waterproof gloves and safety goggles whenever mixing or using cement-
based products.
2. Add 1 part cement, 2 parts sand, and a sufficient amount of SikaLatex® R to produce a creamy paint
consistency.
3. Brush the mixture with a stiff bristle brush into the entire area to be resurfaced. Make sure the
entire surface and all edges are covered.
4. Apply the repair mortar immediately, before the bonding agent dries.
SITE PREP & PROCEDURE (As an Admixture)
1. Add SikaLatex® R to repair mortar or concrete instead of water, and mix to a desired consistency.
Follow the concrete or mortar instructions to correct proportions. Add more SikaLatex R as desired.
CONCRETE BONDING ADHESIVE AND ACRYLIC FORTIFIER
SikaLatex® R
HOW-TO GUIDE
usa.sika.com/retail y Refer to Product Data Sheet for more information.
  • Page 1 1

Sika 187782 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI