Kmart 42619826 User manual

Type
User manual
9
2
34
6
1
10
11
11
11
11
1
234
567
89 10
11
7
8
4x12mm
75x73x14mm
6x30mm
4x35mm
4x14mm
20x150mm
5
x2
12
Hardw
are list
A
B
C
D
E
F
G
H
6 x 35 mm
15 x 9 mm
6 x 30 mm
4 x 40 mm
4 x 30 mm
12 PCS
8 PCS
4 PCS
1 PCS
1 PCS
1 PC
1 PC 1 PC 1 PC
2 PCS2PCS
2 PCS
2 PCS 2 PCS 1 PC
4 PCS
20 PCS
4 PCS
8 PCS
Assembly Instructions
CARE INSTRUCTIONS:
TO BE ASSEMBLED ON A CLEAN, DRY AND SMOOTH SURFACE. WIPE CLEAN WITH A SOFT DAMP CLOTH. NEVER USE SCOURERS, ABRASIVES OR CHEMICAL SOLVENTS. CHECK AND TIGHTEN ALL PARTS
REGULARLY. KEEP AWAY FROM MOISTURE AND DIRECT SUNLIGHT.STORE IN A DRY PLACE. FOR INDOOR USE ONLY.
WARNING!
DO NOT STAND, SIT OR LEAN ON THIS UNIT. DO NOT USE THIS UNIT AS A STEP LADDER OR AS A CHOPPING SURFACE. ENSURE THIS UNIT IS USED ONLY ON A FLAT SURFACE. DO NOT USE THIS UNIT UNLESS ALL
BOLTS AND SCREWS ARE FIRMLY SECURED. DO NOT PLACE HOT ITEMS SUCH AS COFFEE CUPS DIRECTLY ON THE SURFACE OF THIS FURNITURE ITEM. KEEP AWAY FROM CHILDREN AND BABIES. THIS PACKAGE
CONTAINS SMALL PARTS AND SHARP POINTS. ADULT ASSEMBLY REQUIRED. A MILD ODOUR MAY BE PRESENT WHEN FIRST OPENING THIS CARTON. SIMPLY ALLOW TO AIR OUTSIDE AND THIS WILL FADE.
MAXIMUM SAFE LOAD: 10KGS FOR TOP PANEL, 5KGS FOR EACH DRAWER.
(
A
A
B
A
4
3
1
A
A
A
B
Step 1: Fix the screws from Part A onto board 1 , and put Part B into the corresponding
position (as per below diagram). Attach board 3 & 4 to board 1 , and then fix the
round screws from Part A with a screwdriver. Ensure all parts align.
A
10
4
3
1
Step 2: Slide board 10 into the corresponding position (as per below diagram). Ensure
it is fully fitted in the groove.
B
b
B
C
C
C
C
2
1
3
4
10
Step 3: Put part B into the corresponding position (as per below diagram). Attach board
2 with screws (Part C) using a screwdriver.
Step 4: Fix Part H onto board 2 with screws (Part G).
b
H
H
G
G
G
G
H
H
4
2
b
11
11
11
11
D
D
A
A
A
7
8
9
6
5
x2
Step 5: Screw the legs (Part 11 ) into Part H from step 4.
Step 6: Assemble board 6 , 7 , 8 with screws (Part D). Slide board 9 into the
corresponding position (as per below diagram). Ensure it is fully fitted in the groove.
x2
7
8
6
x2
Step 7: Fix the screws from Part A onto board 5 . Attach this piece to the part from step
6 (as per below diagram), and then fix the round screws from Part A with a screwdriver.
Ensure all parts align.
8
7
6
Step 8: Slide the drawers into the unit. Assembly is complete.
Note this drawer comes with wall fixing attachments ( E & F ).
Please use if you want to secure this drawer to the wall.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Kmart 42619826 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI