Kmart 42967804 User manual

Category
Baby furniture
Type
User manual
2-in-1 Wooden Cot
INSTRUCTION MANUAL
The illustrations shown in this manual are for reference only.
The manufacturer reserves the right to change any specification
or feature without further notice.
IMPORTANT-RETAIN FOR FUTURE
REFERENCE.
READ CAREFULLY
1
Cot mode:
0-18 months
Maximum weight: 22kg
Toddler bed mode:
15+ months
Maximum weight: 22.7kg
We strongly suggest you read through this leaflet in full, and follow the simple step by
step guide to assembly.
WARNING :
Do not leave your child unattended.
The correct use and maintenance of your cot bed will ensure it provides long and
trouble-free use.
CARE & MAINTENANCE
Scu marks may be removed with a damp cloth.
Occasional use of furniture polish will maintain the good looks of your cot.
Periodically check all screw fixings to ensure they remain tight.
To keep the natural aspect, the surfaces were painted with a protection varnish.
The beauty of your furniture can be maintained by cleaning it with a soft dust
absorbing cloth. Occasionally a water-humidified cloth can be used and in this
case, ensure to dry the furniture with a dry cloth.
All furniture can be damaged by knocks and scrapes - if you dent the surface
or break the seal of the lacquer, rub some solid wax into the dent to exclude the
atmospheric moisture.
THESE INSTRUCTIONS ARE IMPORTANT
PLEASE READ CAREFULLY AND RETAIN FOR FUTURE
REFERENCE
2
WARNING :
TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD ALWAYS
BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN SIT UP UNAIDED.
MATERIALS
This cot bed is made of solid wood and MDF. Wood is a totally natural material
therefore no two pieces are ever identical in pattern or colour. As wood furniture gets
older, its colour may change due to being exposed to light and air, so any new pieces
may look a shade dierent to those you already have. Don’t be concerned about this,
as the colour dierence will diminish over a small period of time.
ASSEMBLY
Before starting the assembly, please read through these instructions. Then carefully
unpack your cot and check that you have a complete set of parts against the list.
We recommend that you assemble your cot on a clean, flat surface, making sure
there are no sharp objects present that may mark or damage the panels.
CAUTION
There are many small components used in the construction of this cot bed. These
items should be kept out of reach of young children whilst assembling the unit.
3
INSTRUCTIONS FOR SAFE USE WHEN IN COT MODE:
Note: 2 height positions in this mode
This cot has been manufactured for use with a mattress which measures
690 mm wide x 1300 mm long and no more than 150 mm thick.
The width and length are specified because it is important that the gaps between
the mattress, sides and ends will not exceed 40 mm when the mattress is pushed
to one corner of the cot and 20 mm when the mattress is in the centre of the cot.
The thickness of the mattress has been specified to ensure that the depth of the
cot is greater than 500 mm when the base is in the lowest position to minimise the
risk of a child climbing or falling out.
The age range when in cot mode is from birth to 18 months or less than 22kg.
WARNING: Be aware of the risk of open fire and other sources of strong heat, such
as electric bar fires, gas fires, etc. in the near vicinity of the cot.
WARNING: Ensure that the cot is placed in reasonable distance from curtains, blinds,
heaters and electric power points.
WARNING: Always keep the following out of reach from any position in the cot:
medication, strings, elastic, small toys or small items such as money.
WARNING: Do not use the cot if any part is broken, torn or missing and use only spare
parts provided by the manufacturer.
WARNING: Do not use more than one mattress in the cot.
The lowest position is the safest. The base should always be used in this position as
soon as the baby is able to sit up unaided.
WARNING: All assembly fittings should always be tightened properly, checked
periodically, and care should be taken to ensure no screws are loose, as a child could
trap parts of the body, or clothing (e.g. strings, necklaces, ribbons from baby
pacifiers), which could pose a risk of suocation and strangulation.
WARNING: To prevent injury from falls, do not use this cot if the child is able to climb
out of it.
WARNING: Children are likely to play, bounce, jump and climb on beds, therefore the
child’s bed should not be placed too close to other furniture or windows, and should
be placed either tight up against a wall or have a gap of 300 mm between the wall
and the side of the bed.
Cot Mode: Designed and Manufactured to AS/NZS 2172-2013
4
INSTRUCTIONS FOR SAFE USE WHEN IN TODDLER BED MODE:
Note: 1 height position in this mode
Recommended mattress size is 690 mm wide x 1300 mm long and no more than
150 mm thick.
The minimum age shall not be less than 15 months and the maximum weight shall not
be greater than 22.7 kg.
WARNING:
INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT.
Openings in and between bed parts can entrap the head and neck of a small child.
NEVER use bed with children younger than 15 months.
ALWAYS follow assembly instructions.
WARNING
STRANGULATION HAZARD
NEVER place bed near windows where cords from blinds or drapes may strangle a child.
NEVER suspend strings over bed.
NEVER place items with a string, cord, or ribbon, such as hood strings or pacifier cords,
around a child’s neck. These items may catch on bed parts.
Toddler bed Mode: Designed and Manufactured to ASTM F1821-2019e1
5
1
2
3
1
2
3
4
4cm
5cm
6cm
Bolt
M6x70mm M6
A
16X
PVC Tube
M6x16mm
B
16X
BoltNut
C
16X
Nut
F
8X
M6x16mmM6 M8
E
8X
3cm
2cm
1cm
0cm
D
Plastic
Washer
24X
Allen Key
H
2X
G
Plastic
Washer
8X
6
PARTS & HARDWARE
PARTS LIST:
HARDWARE LIST:
RECOMMENDED MATTRESS SIZE IS 690 MM WIDE × 1300MM LONG AND NO MORE THAN 150 MM THICK.
WARNING: TO PREVENT SUFFOCATION AND FALLS, THE MAXIMUM THICKNESS OF THE MATTRESS USED
SHOULD NOT EXCEED 150zzzzzzzzMM
WARNING: TO PREVENT FALLS, THE MATTRESS BASE SHOULD ALWAYS BE IN ITS LOWEST POSITION WHEN
THE CHILD CAN SIT UP. THE AGE RANGE WHEN IN COT MODE IS FROM BIRTH TO 18 MONTHS
THIS COT COMPLIES WITH AS/NZS 2172 - 2013
WARNING:
INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT.
Openings in and between bed parts can entrap head and neck of a small child.
NEVER use bed with children younger than 15 months.
ALWAYS follow assembly instructions.
WARNING:
INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT.
Openings in and between bed parts can entrap head and neck of a small child.
NEVER use bed with children younger than 15 months.
ALWAYS follow assembly instructions.
WOODEN COT MODE: Keycode: 42967804
Batch Code:
XX XX XX
THIS SIDE UP
Imported by :
IMPORTED FOR KMART STORES
IN AUSTRALIA AND NEW ZEALAND.
Country of Origin : China
WOODEN TODDLER BED MODE Keycode: 42967804
THE MINIMUM AGE SHALL NOT BE LESS THAN 15 MONTHS,
THE MAXIMUM WEIGHT SHALL NOT BE GREATER THAN 50lb (22.7 kg)
THE MAXIMUM RECOMMENDED MATTRESS THICKNESS
MUST NOT BED GREATER THAN 6 in.(150mm)
TODDLER BED COMPLIES WITH ASTM F1821 - 2016
1
2
H
1
3
B
A
X4
D
C
A
x 4 x 4
D
x 4
C
x 4
B
7
1.
2.
COT ASSEMBLY
1
X2
H
A
x 4 x 4
D
x 4
C
x 4
B
8
3.
4.
X4
A
D
C
3
B
H
A
x 8 x 8
D
x 8
C
x 8
B
D
X4
C
Nut hole
face down
A
B
4
Make sure to face base slats upwards
(see label ‘this side up’)
Turning base the wrong way will weaken its structure.
BASE IN HIGHER
POSITION
H
x 2
F
x 8
G
x 8
E
x 8
D
x 8
9
5.
Refit nuts (E) and bolts (F) to the mattress base mounting holes
to prevent possible finger entrapment.
F
D
G
E
X4
A
x 8
D
x 8
C
x 8
B
x 8
F
x 4
E
x 4
G
x 4
D
x 4
H
x 2
10
1.
2.
TODDLER BED ASSEMBLY
Make sure to face base slats upwards
(see label ‘this side up’)
Turning base the wrong way will weaken its structure.
D
X4
X4
C
FG
DE
Nut hole
face down
A
B
4
2
1
1
1
X2
11
keycode 42967804
Made in China
For AU / NZ: Imported for Kmart stores in Australia and New Zealand.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Kmart 42967804 User manual

Category
Baby furniture
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI