Oneida Air Systems DBD080000, DBD Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Oneida Air Systems DBD080000 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Backdraft Damper Installation Sheet
Installation:
Installation:
Dust
Collector
Dust
Collector
Machines
Machines
Snap-Lock Pipe
Spiral Adapter
Spiral Pipe
Snap-Lock Pipe
Spiral Adapter Spiral Pipe
Backdraft Damper
Backdraft Damper
Backdraft Damper
Make sure the Backdraft Damper is installed in the proper direction. The tapered end should point towards the dust collector
and the square end should point towards your machines and the gate hinge is on the top. You must completely seal where
the Damper connects to the pipe with silicone or with metal tape or both.
Make sure the Backdraft Damper is installed in the proper direction. The tapered end should point towards the dust collector
and the square end should point towards your machines and the gate hinge is on the top. You must use spiral adapters to
connect the pipe to the damper (as shown above) and completely seal where the Damper and pipe connects to the adapter
with silicone or with metal tape or both.
Outdoors
1/1