multicomp pro MP010942 UK User manual

Brand
multicomp pro
Model
MP010942 UK
Category
Interface hubs
Type
User manual

Multicomp Pro MP010942 UK is a 7 Port USB 2.0 Hub that allows you to connect up to 7 USB devices, such as external storage, digital cameras, or printers, to your computer. It comes with a rugged all-metal casing and built-in overcurrent protection for each port, ensuring the safety of your connected devices.

To use the hub, simply plug the power adapter into the hub and connect the mains cable to the power adapter. Then, plug the supplied USB Cable (Type B connector) into the USB upstream port and connect it to your PC USB socket. The operating system will now detect your Hub and install the driver if required.

Multicomp Pro MP010942 UK is a 7 Port USB 2.0 Hub that allows you to connect up to 7 USB devices, such as external storage, digital cameras, or printers, to your computer. It comes with a rugged all-metal casing and built-in overcurrent protection for each port, ensuring the safety of your connected devices.

To use the hub, simply plug the power adapter into the hub and connect the mains cable to the power adapter. Then, plug the supplied USB Cable (Type B connector) into the USB upstream port and connect it to your PC USB socket. The operating system will now detect your Hub and install the driver if required.

MP010942 7 Port USB 2.0 Hub
and MP010943 7 Port USB 3.0 Hub
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
When using electrical appliances basic safety precautions should always be followed.
• To prevent fire or shock hazard, do not expose this product to rain or moisture.
• Only use the PSU supplied or one of identical specification.
• Beware of static electricity which may damage the device.
• Connect up to 7 USB devices such as external storage, digital cameras or printers.
• Rugged all metal casing.
• Built-in over current protection for each port.
• 7 Port USB Hub
• USB Cable x 1
• 12VDC 3A PSU and mains cable.
• User Manual
OVERVIEW
CONTENTS
INSTALLATION
• Plug the power adapter 12V output into the hub.
• Connect the mains cable to the power adapter, then connect to the mains supply
and turn on the power.
• Plug the supplied USB Cable (Type B connector) into the USB upstream port and
connect to your PC USB socket.
• The operating system will now detect your Hub and install the driver if required.
• Connect any USB device you wish to use to each port and your computer will show
the connected devices.
• Compatible with all USB equipped computers with USB-enabled operating systems.
CLEANING & MAINTENANCE
• Clean the outside casing with a soft cloth lightly moistened with a mild detergent.
• Never use any abrasive or solvents.
SPECIFICATIONS
Model MP010942 MP010943
Output Ports 7 x USB 2.0 7 x USB 3.0
Power Input 12V DC 3A via PSU
USB Rated Output 5V DC 900mA
Dimensions WxDxH 127 x 70.8 x 26.5
Weight Net/Gross 248g/448.5g
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China.
PO Box 13362 Dublin 2
LS12 2QQ
Man Rev 1.0
  • Page 1 1
  • Page 2 2

multicomp pro MP010942 UK User manual

Brand
multicomp pro
Model
MP010942 UK
Category
Interface hubs
Type
User manual

Multicomp Pro MP010942 UK is a 7 Port USB 2.0 Hub that allows you to connect up to 7 USB devices, such as external storage, digital cameras, or printers, to your computer. It comes with a rugged all-metal casing and built-in overcurrent protection for each port, ensuring the safety of your connected devices.

To use the hub, simply plug the power adapter into the hub and connect the mains cable to the power adapter. Then, plug the supplied USB Cable (Type B connector) into the USB upstream port and connect it to your PC USB socket. The operating system will now detect your Hub and install the driver if required.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents