HCPHCCBT

HQST HCPHCCBT User manual

  • Hello! I am an AI chatbot trained to assist you with the HQST HCPHCCBT User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • Which HQST MPPT charge controllers are compatible with the HCPHCCBT Bluetooth module?
    What are the main features of the HCPHCCBT Bluetooth module?
    How do I connect the HCPHCCBT Bluetooth module to my HQST MPPT charge controller?
    What is the purpose of the RS485 port on the HCPHCCBT Bluetooth module?
    What is the voltage level of the VDD pin on the RS485 pinout?
B l u e t o o t h M o d u l e
мм
Bluetooth Module
BM
Manual
This user manual offers a brief walkthrough of its features and how to use it.
Please keep the user manual in hand for future reference.
Still need help? Feel free to send us an email at sales@myhqsolar.com
FEATURES PRODUCT CONNECTION PORT
Through this module, it is possible for the mobile phone to
communicate with the controller
COMPATIBILITY
Works with HQST MPPT Charge Controllers Series with an
RS485 communication port: HCC-20MPPTN, HCC-40MPPTN,
HCC60HTR.
If you’re not sure about the compatibility of your controller,
please feel free to contact the seller directly or send us an email
at sales@myhqsolar.com
Expand the controller usage scenario
RS485 PIN
RS485 Port
PIN-1
VDD
PIN-2
VDD
PIN-3
GND
PIN-4
GND
PIN-5
D-
PIN-6
D+
VDD = 3.3V D- == B D+ == A
Bluetooth Module
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
/