Instruction of Use
• Blades should be cleaned and oiled regularly, using the brush and oil
provided.
• A lack of blade cleaning and oiling will lead to increases in noise and heat.
• Replace the batteries. (Battery products only)
• Ensure batteries are fitted in the correct orientation. (Battery products
only)
• Blades will dull with use and may require sharpening or replacement.
• Blade alignment - blades should be checked before use and re-aligned
according to the instruction manual if required.
• Clipper does not operate – ensure the battery is fully charged. Only use the
transformer provided.
• Blades are not moving – Remove blade set and ensure it is free of hair and
then oil the blade – this may give the impression that the clipper is not
switching on.