2. Bertazzoni
  3. REF30BMBIPLT
REF30BMBIPLT

Bertazzoni REF30BMBIPLT User manual

  • Hello! I've reviewed the specifications document for the Bertazzoni refrigerator models REF30BMBIPLT and REF30BMBIPRT, focusing on the custom door panel dimensions, weight limits, and thickness requirements. I'm ready to answer your questions about these specifications and help you understand the document better.
  • What is the maximum weight for the top door panel?
    What is the height of the top door panel?
    What is the maximum thickness allowed for the custom panels?
DIMENSIONS - INCHES
(A) Height of top door panel 54 3/4”
(B) Width of top door panel 29 3/4”
(C) Height of bottom drawer panel 24 7/8”
(D) Height from bottom of product to top of bottom drawer panel 28 7/8”
(E) Width of bottom drawer panel 29 3/4”
(F) Gap between top door panel and bottom drawer panel 1/8”
(G) Toe kick height 3 1/8” - 7 3/8”
(A+D) Overall height 83 5/8”
Thickness of custom panels min 3/4” - max 1 1/8”
WEIGHT - POUNDS
Maximum weight of top door panel 51 lbs
Maximum weight of bottom drawer panel 25 lbs
www.bertazzoni.com
Disclaimer: while every effort has been made to insure the accuracy of the information contained in this document, Fratelli Bertazzoni reserves the right to change any part of the information at any
time without notice. For detailed installation specifications consult the installation manual. Fratelli Bertazzoni, Bertazzoni and the winged wheel brand icon are registered trademarks of Bertazzoni Spa.
NOTE: These specifications assume a standard toe kick height of 4”. For different toe kick heights, adjust
C accordingly. C must be between 21 1/2” and 25 3/4”.
TOP
DOOR PANEL
BOTTOM
DRAWER PANEL
(E)
(F)
(C) (D)
(A)
CABINET
(B)
(G)
CUSTOM DOOR PANELS SPECIFICATIONS
FOR BUILT-IN REFRIGERATOR MODELS REF30BMBIPLT - REF30BMBIPRT
Panels to be manufactured and fitted by cabinet maker and installer
/