2. Home
  3. Domestic appliances
  4. Floor care
  5. Vacuum cleaners
  6. Shark
  7. ZU561Q

Shark ZU561Q User manual

  • Hello! I've reviewed the Shark Navigator Lift-Away ZU561Q Quick Start Guide. This document covers how to assemble your vacuum, use its features such as the Lift-Away mode and Zero-M technology, and perform maintenance like emptying the dust cup and cleaning the filters. I'm ready to answer your questions about this vacuum.
  • How often should I empty the dust cup?
    How often should I rinse the pre-motor filters?
    How often should I rinse the HEPA filter?
    What should I do if there is hair wrapped around the brushroll?
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
A Vacuum Pod
B Motorized Floor Nozzle
C Handle & Hose
D Wand
E Accessory Holder
F Pet Multi-Tool
G Duster Crevice Tool
H Wide Upholstery Tool
I Precision Duster
J 16" Extension Wand
WHAT’S INSIDE TIPS
EMPTYING THE DUST CUP
CHECKING FOR BLOCKAGES
ZU561Q_QSG_EB1_Mv3
QUICK START GUIDE
Empty the dust cup after each use.
MAINTENANCE:
Rinse pre-motor
filters every 3 months
and HEPA filter once a
year. Rinse with water
only. Allow filters to
air-dry completely
before reinstalling.
See enclosed Owner’s
Guide for more
information on how
to clean and replace
the filters.
A
C
E
D
For quick cord
access, rotate
upper hook down
and remove cord.
Use cord clip
to secure cord
while in use.
To store your
vacuum, wrap
cord around
cord hooks.
Attach your
desired
accessory
(Click)
(Click)
(Click)
(Click)
(Click)
B
Brushroll access
Unlock Open Cover Clear Intake
Use a coin to turn locks, then rotate cover open.
Clean o any debris on bristles, and clear the debris intake.
With Zero-MTM technology, the brushroll actively removes
hair wrap while you vacuum, sending it to the dust cup.
Check for blockages or objects stuck in the brushroll.
If any hair is wrapped around brushroll, extending cleaning
time will help it clear.
clean
LIFT-AWAY
®
F G
H
NOTE: For proper operation, ensure all parts
are firmly CLICKED into place.
I J
2 WAYS TO CLEAN
UPRIGHT
LIFT-AWAY®
For questions or to register your product, contact us at 1-800-798-7398 or visit us online at sharkclean.com
Power/Surface switch
Press switch to select surface
setting or to turn o power.
To engage brushroll, step on floor
nozzle and tilt handle back.
Lift-Away
Release
Wand
Release
Suction
Control
Handle
Release
Handle
Lift-
Away
Wand
Attach accessories to handle or wand.
Press release buttons
to lift pod o nozzle,
or to release handle
or wand.
@sharkcleaning
For additional parts
and accessories,
visit sharkaccessories.com
Slide to MIN to increase
maneuverability
on carpets.
/